Analytical contributions to the evaluation of painting authenticity from Princely church of Curtea de Arges

The present study contains the analyses performed for pigment samples taken from the Princely church of Curtea de Arges, one of the oldest churches in Romania. The results of our investigations have shown the source of these samples, thus being identified the pigments: natural ultramarine, cinnabar, red earth, and calcium carbonate in the painting from the 14th century, the pigments: lead white, zinc white, and Prussian blue in the repainting from the 19th century and the pigments zinc white, titanium dioxide white, bone white, yellow ochre, red ochre, green earth, artificial ultramarine, and mars red in the interventions carried out in the 20th century. The analyses consisted of light microscopy (LM) and microchemical tests, as well as energy dispersive X-ray (EDX) analysis. This system of analyses allows one to precisely determine the authenticity of certain pigments, thus avoiding the dating errors for different interventions carried out on the original mural painting from the Saint Nicholas Princely church of Curtea de Arges.     

Vibrational analyses of silacyclopentanes

The complete infrared and Raman spectra of 1,1-difluoro-1-silacyclopentane and 1,1-dichloro-1-silacyclopentane have been recorded and analyzed. Furthermore, a number of the vibrational frequencies of the silacyclopentane and silacyclopentane-1, 1-d₂ molecules have been reassigned.A normal coordinate calculation for each of these molecules was carried out and this demonstrated the validity of the assignments. Considerable mixing of the modes was found especially where ring vibrations and SiX₂ motions were involved.     

Luminescent properties of PP and LDPE films and rods doped with the Eu(III)‐La(III) complex

The work is devoted to luminescent properties of trivalent lanthanide complexes dispersed in thermoplastic host matrices. Polyethylene films and polypropylene‐rods, both doped with these complexes, were manufactured using an extrusion technique. Two kinds of dopants were used: Eu(III)‐thenoyltrifluoroacetone‐1,10‐phenanthroline complex (1) and Eu(III)‐La(III)‐1,10‐phenanthroline complex (2). Absorption, excitation, emission spectra and lifetime of luminescence were studied. The impact of the polymer matrix on the emission spectra was investigated. Emission spectra of the films were studied at room and helium temperatures. Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) surface mapping showed that in the Eu(III)‐La(III) complex europium forms islands (clusters) with a dimension of 1 µm, whereas lanthanum was dispersed more uniformly in the polymer matrix. Dependence of emission intensity on the excitation was determined. Copyright © 2006 John Wiley & Sons, Ltd.     

4fN-15d组态自旋允许与禁戒跃迁能级的研究

通过稀土光谱理论，计算了三价稀土离子的4f^N-15d组态能级的f与d电子间的库仑相互作用，结果表明对于重稀土元素，其自旋允许跃迁能级位置高于自旋禁戒跃迁能级位置，并且两种能级间的能级差随f电子数的增加而依次减小。对于轻稀土元素,则自旋禁戒跃迁能级位置高于自旋允许跃迁能级位置。结果很好地解释了自旋禁戒跃迁能级的光谱现象。     

Synthesis of [(MeCyt)2H]I-structure and stability of a dimeric threefold hydrogen-bonded 1-methylcytosinium 1-methylcytosine cation

Reaction of trimethylsilyl-protected cytosine with methyl iodide afforded N1-methylated product. Subsequent treatment with ethanol resulted in cleavage of the protection group forming [(MeCyt)2H]I (4). Identity of was confirmed by microanalysis, mass spectrometry, 1H and 13C NMR spectroscopy and by single-crystal X-ray diffraction analysis. Crystals of consist of dimeric [(MeCyt)2H]+ cations and I- anions. These ions are arranged in the crystal such that there is a strong base stacking (mean stacking distance 3,467 angstroms) and, furthermore, pi interactions between I- and cytosine rings (mean distance 3,737 angstroms). The dimeric [(MeCyt)2H]+ cations are centrosymmetric having three strong hydrogen bonds, namely two terminal N4-H...O' ones (N4...O' 2.815(4) angstroms) and a central N3-H...N3' (N3...N3' 2.813(4) angstroms) one. Quantum chemical calculations on the DFT level of theory show that the gas phase structure of the dimeric cation exhibits two different terminal N-HO hydrogen bonds, a stronger (N4...O' 2.722 angstroms) and a weaker one (N4'...O 2.960 angstroms). The central N3-HN3[prime or minute] hydrogen bond (N3...N3' 2.852 angstroms) was characterized to have an unsymmetrically located proton and a typical double minimum potential with a very low activation barrier. The interaction energy between [(MeCyt)H]+ and MeCyt yielding [(MeCyt)2H]+ was calculated to be -42.4 kcal mol(-1)(ZPE and BSSE corrected). Comparison with the interaction energy (calculated on the same level of the theory) between cytosine and guanine yielding the triply hydrogen-bonded Watson-Crick dimer (-24.2 kcal mol(-1)) revealed a much higher stability of the hydrogen bonds in [(MeCyt)2H]+.     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

Ruthenium-based Conjugated Polymer and Metal-organic Framework Nanocomposites for Glucose Sensing

Many studies have focused on effective ways to exploit enzyme immobilization on an electrode surface to help improve the performance of enzymatic electrochemical biosensors. Herein, a novel glucose sensor was fabricated by immobilizing glucose oxidase (GOx) onruthenium-based conjugated polymer (CP) and metal-organic framework (MOF) nanocomposites. This has not only reduced the applied potential to 0.2 V (vs. Ag/AgCl), but also improved the effective surface area for enzyme immobilization.PPG@Ru@UiO-66-NH₂ was tailored by controlled chemical synthesis from a pre-synthesized water-soluble conjugated polymer (poly(N-phenylglycine)) and metal-organic framework (UiO-66-NH₂). The resulting nanocomposites were characterized using Fourier transform infrared spectroscopy, X-ray fluorescence, scanning electron microscopy, and cyclic voltammetry. The PPG@Ru@UiO-66-NH₂/GOx coated electrodedisplayed a linear measurementrange for glucose from 1 mM to 10 mM, with a sensitivity of 45.92 μA ⋅ mM⁻¹cm⁻¹ and limit of detection of5 μM( ). Furthermore, the practical application of the fabricatedglucosesensor was tested in simulative blood samples with satisfactoryaccuracy. This approach alsoopens a new door for applications regarding both enzymatic electrochemical biosensors and enzymatic biofuel cells (EBFCs).     

A NMR method for the analysis of mixtures of alkanes with different deuterium substitutions

¹³C NMR at 125.76 MHz with ¹H and ²H decoupling, ²H NMR at 76.77 MHz with ¹H decoupling, and ¹H NMR at 500.14 MHz with ²H decoupling were employed as analytical tools to study the complex mixtures of deuterated ethanes resulting from the catalytic H–D exchange of normal ethane with gas-phase deuterium in the presence of a platinum foil. Reference samples consisting of 1:1 binary mixtures of pure normal ethane and ethane-d_n (n=1–6) were used to identify the peak positions in the ¹³C, ²H, and ¹H NMR spectra due to each individual isotopomer, and the effect of isotopic substitution on the chemical shifts was determined in each case. While the NMR of all three nuclei worked well for the identification of the individual components of the 1:1 standard mixtures, both ¹H and ²H NMR suffered from inadequate resolution when studying complex reaction mixtures because of the broadening of the lines due to ¹H–¹H (¹H NMR) and ²H–²H (²H NMR) couplings. ¹³C NMR was therefore determined to be the method of choice for the quantitative analysis of the reaction mixtures. Using the ¹³C NMR results, a correlation that takes into account the primary and secondary isotope substitution effects on chemical shifts was deduced. This equation was used for the identification of the individual components of the mixtures, and integration of the individual observed resonances was then employed for quantification of their composition. This study shows that ¹³C NMR with ¹H and ²H decoupling is a viable procedure for studying mixtures of deuterated ethanes. Furthermore, the additivity of the isotopic effects on chemical shifts and the transferability of the values obtained with ethane to other molecules makes this approach general for the analysis of other isotopomer mixtures.     

Aminopyrene functionalized mesoporous silica for the selective determination of resorcinol

Aminopyrene was convalently anchored onto the surface of mesoporous MCM-41 silica by post-grafting. This organic-inorganic hybrid has been applied as sensing material to phenols determination. Experimental results reveal that the functionalized material presents good sensitivity and selectivity towards resorcinol and can be used for resorcinol determination in water at pH 6.0. The fluorescence intensity of aminopyrene functionalized mesoporous silica decreases proportionally to the logarithm of resorcinol concentration in water. The linear range for resorcinol detection lies in 4.79-163 μM with a detection limit of 2.86 μM (S/N = 3).     

Scanning tunneling microscopy study of the structure and orbital-mediated tunneling spectra of cobalt(II) phthalocyanine and cobalt(II) tetraphenylporphyrin on au(111): mixed composition films

Binary thin films of cobalt(II) phthalocyanine (CoPc) and cobalt(II) tetraphenylporphyrin (CoTPP) were prepared at submonolayer coverage on Au(111)/mica substrates byvapor deposition. All sample preparation and analysis were done under an ultrahigh vacuum. Scanning tunneling microscopy (STM) constant-current images of CoPc/CoTPP mixtures showed two close-packed surface structures, with different compositional percentages and some disorder. CoPc was also observed exclusively in one-dimensional chains and as single, isolated molecules below 220 K. Occupied and unoccupied orbital energy levels were identified by STM and tunnel-diode-based orbital-mediated tunneling spectroscopy. Occupied energy levels were also confirmed by ultraviolet photoelectron spectroscopy. The transient oxidation of the Co d(z2) orbital is identified in STM dI/dV(V) curves just negative of the 0 V sample bias for both molecules. Nearly identical constant-current contours are observed over the central Co2+ ions of CoTPP and CoPc, indicating that the attenuation of the d(z)2 orbital-mediated tunneling current induced by the structure of TPP relative to Pc is at most a factor of about 10. The orbital-mediated tunneling spectra of CoTPP and CoPc are distinctly different and allow these structurally similar species to be differentially identified.