An improved synthesis of 3-deazaeytosine, 3-deazauracil, 3-deazacytidine,and 3-deazauridine

3-Dcazacytosine (4-amino-2-pyridone, 3 ), 3-doazauracil (4-hydroxy-2-pyridone, 5 ), 3-deaza-cytidine (4-amino-1-β-D-ribofuranosyl-2-pyridonc, 9 ), and 3-deazauridine (4-hydroxy-1-β-D-ribo-furanosyl-2-pyridone, 11 ) were prepared in high overall yields from 1-methoxy-1-buten-3-yne ( 1 ). Ethyl 3,5,5-triethoxy-3-pentenoate ( 2 ), obtained from acylatioti of 1 with diethyl carbonate and subsequent in situ conjugate addition of ethoxide, was cyelized with ammonia to provide 3 . Diazotization of 3 and subsequent in situ hydroxydediazotization afforded 5 . Nucleoside 9 was obtained from the stannic chloride-catalyzed condensation of bis-trimethylsilylated 3 and 1-O-acetyl-2,3,5-tri-O-benzoyl-β-D-ribofuranose ( 7 ), followed by ammonolysis of the blocking groups. Diazotization of 9 and subsequent in situ hydroxydediazotization afforded nucleosidc 11 .     

Comparative investigation on non-IPR C68 and IPR C78 fullerenes encaging Sc3N molecules

A computational study on the experimentally detected Sc(3)N@C(68) cluster is reported, involving quantum chemical analysis at the B3LYP/6-31G level. Extensive computations were carried out on the pure C(68) cage which does not conform with the isolated pentagon rule (IPR). The two maximally stable C(68) isomers were selected as initial Sc(3)N@C(68) cage structures. Full geometry optimization leads to a confirmation of an earlier assessment of the Sc(3)N@C(68) equilibrium geometry (Nature 2000, 408, 427), namely an eclipsed arrangement of Sc(3)N in the C(68) 6140 frame, where each Sc atom interacts with one pentagon pair. From a variety of theoretical procedures, a D(3h) structure is proposed for the free Sc(3)N molecule. Encapsulated into the C(68) enclosure, this unit is strongly stabilized with respect to rotation within the cage. The complexation energy of Sc(3)N@C(68) cage is found to be in the order of that determined for Sc(3)N@C(80) and exceeding the complexation energy of Sc(3)N@C(78). The cage-core interaction is investigated in terms of electron transfer from the encapsulated trimetallic cluster to the fullerene as well as hybridization between these two subsystems. The stabilization mechanism of Sc(3)N@C(68) is seen to be analogous to that operative in Sc(3)N@C(78). For both cages, C(68) and C(78), inclusion of Sc(3)N induces aromaticity of the cluster as a whole.     

Analytical contributions to the evaluation of painting authenticity from Princely church of Curtea de Arges

The present study contains the analyses performed for pigment samples taken from the Princely church of Curtea de Arges, one of the oldest churches in Romania. The results of our investigations have shown the source of these samples, thus being identified the pigments: natural ultramarine, cinnabar, red earth, and calcium carbonate in the painting from the 14th century, the pigments: lead white, zinc white, and Prussian blue in the repainting from the 19th century and the pigments zinc white, titanium dioxide white, bone white, yellow ochre, red ochre, green earth, artificial ultramarine, and mars red in the interventions carried out in the 20th century. The analyses consisted of light microscopy (LM) and microchemical tests, as well as energy dispersive X-ray (EDX) analysis. This system of analyses allows one to precisely determine the authenticity of certain pigments, thus avoiding the dating errors for different interventions carried out on the original mural painting from the Saint Nicholas Princely church of Curtea de Arges.     

Vibrational analyses of silacyclopentanes

The complete infrared and Raman spectra of 1,1-difluoro-1-silacyclopentane and 1,1-dichloro-1-silacyclopentane have been recorded and analyzed. Furthermore, a number of the vibrational frequencies of the silacyclopentane and silacyclopentane-1, 1-d₂ molecules have been reassigned.A normal coordinate calculation for each of these molecules was carried out and this demonstrated the validity of the assignments. Considerable mixing of the modes was found especially where ring vibrations and SiX₂ motions were involved.     

Luminescent properties of PP and LDPE films and rods doped with the Eu(III)‐La(III) complex

The work is devoted to luminescent properties of trivalent lanthanide complexes dispersed in thermoplastic host matrices. Polyethylene films and polypropylene‐rods, both doped with these complexes, were manufactured using an extrusion technique. Two kinds of dopants were used: Eu(III)‐thenoyltrifluoroacetone‐1,10‐phenanthroline complex (1) and Eu(III)‐La(III)‐1,10‐phenanthroline complex (2). Absorption, excitation, emission spectra and lifetime of luminescence were studied. The impact of the polymer matrix on the emission spectra was investigated. Emission spectra of the films were studied at room and helium temperatures. Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) surface mapping showed that in the Eu(III)‐La(III) complex europium forms islands (clusters) with a dimension of 1 µm, whereas lanthanum was dispersed more uniformly in the polymer matrix. Dependence of emission intensity on the excitation was determined. Copyright © 2006 John Wiley & Sons, Ltd.     

Angular ligand constraint yields an improved olefin aziridination catalyst

[reaction: see text] The use of a pyridinophane, a macrocycle composed of three pyridines linked, via all ortho positions through CH(2) or CH(2)CH(2) groups, bound to copper, gives good performance (rate and yield) catalyzing the conversion of substituted aliphatic olefins and PhINTs to aziridines. Advantages also derive from using CH(2)Cl(2) solvent and the weakly coordinating anions BAr(4)(-) (Ar = C(6)H(5) or 3,5-C(6)H(3)(CF(3))(2)). Reactions are complete in minutes at 20 degrees C, and yields are almost quantitative for olefins not bearing secondary allylic CH bonds; however, cis-cyclooctene gives only the aziridine despite the allylic hydrogens.     

Ruthenium-based Conjugated Polymer and Metal-organic Framework Nanocomposites for Glucose Sensing

Many studies have focused on effective ways to exploit enzyme immobilization on an electrode surface to help improve the performance of enzymatic electrochemical biosensors. Herein, a novel glucose sensor was fabricated by immobilizing glucose oxidase (GOx) onruthenium-based conjugated polymer (CP) and metal-organic framework (MOF) nanocomposites. This has not only reduced the applied potential to 0.2 V (vs. Ag/AgCl), but also improved the effective surface area for enzyme immobilization.PPG@Ru@UiO-66-NH₂ was tailored by controlled chemical synthesis from a pre-synthesized water-soluble conjugated polymer (poly(N-phenylglycine)) and metal-organic framework (UiO-66-NH₂). The resulting nanocomposites were characterized using Fourier transform infrared spectroscopy, X-ray fluorescence, scanning electron microscopy, and cyclic voltammetry. The PPG@Ru@UiO-66-NH₂/GOx coated electrodedisplayed a linear measurementrange for glucose from 1 mM to 10 mM, with a sensitivity of 45.92 μA ⋅ mM⁻¹cm⁻¹ and limit of detection of5 μM( ). Furthermore, the practical application of the fabricatedglucosesensor was tested in simulative blood samples with satisfactoryaccuracy. This approach alsoopens a new door for applications regarding both enzymatic electrochemical biosensors and enzymatic biofuel cells (EBFCs).     

A NMR method for the analysis of mixtures of alkanes with different deuterium substitutions

¹³C NMR at 125.76 MHz with ¹H and ²H decoupling, ²H NMR at 76.77 MHz with ¹H decoupling, and ¹H NMR at 500.14 MHz with ²H decoupling were employed as analytical tools to study the complex mixtures of deuterated ethanes resulting from the catalytic H–D exchange of normal ethane with gas-phase deuterium in the presence of a platinum foil. Reference samples consisting of 1:1 binary mixtures of pure normal ethane and ethane-d_n (n=1–6) were used to identify the peak positions in the ¹³C, ²H, and ¹H NMR spectra due to each individual isotopomer, and the effect of isotopic substitution on the chemical shifts was determined in each case. While the NMR of all three nuclei worked well for the identification of the individual components of the 1:1 standard mixtures, both ¹H and ²H NMR suffered from inadequate resolution when studying complex reaction mixtures because of the broadening of the lines due to ¹H–¹H (¹H NMR) and ²H–²H (²H NMR) couplings. ¹³C NMR was therefore determined to be the method of choice for the quantitative analysis of the reaction mixtures. Using the ¹³C NMR results, a correlation that takes into account the primary and secondary isotope substitution effects on chemical shifts was deduced. This equation was used for the identification of the individual components of the mixtures, and integration of the individual observed resonances was then employed for quantification of their composition. This study shows that ¹³C NMR with ¹H and ²H decoupling is a viable procedure for studying mixtures of deuterated ethanes. Furthermore, the additivity of the isotopic effects on chemical shifts and the transferability of the values obtained with ethane to other molecules makes this approach general for the analysis of other isotopomer mixtures.     

Selective LC Determination of Cabergoline in the Bulk Drug and in Tablets: In Vitro Dissolution Studies

Cabergoline (CAB) is an ergot alkaloid derivative with dopamine agonist activity. A novel, simple, and rapid stability-indicating high-performance liquid chromatographic (HPLC) method for assay of CAB in tablets has been developed and validated. Chromatography was performed on a 4.6 mm i.d. × 250 mm, 5 μm particle, cyano column with acetonitrile–10 mM phosphoric acid, 35:65 (v/v), containing 0.04% triethylamine, as mobile phase, at a flow rate of 1.0 mL min^?1, and UV detection at 280 nm. Response was a linear function of concentration in the range 0.1–4 μg mL^?1 (r ² = 0.9999). The recovery of the method was good (99.45%) and RSD values for intra-day and inter-day precision were 0.24–0.88% and 0.66–1.19%, respectively. The method can be used for quality-control assay of CAB in tablets, for stability studies, and for in vitro dissolution studies.     

Scanning tunneling microscopy study of the structure and orbital-mediated tunneling spectra of cobalt(II) phthalocyanine and cobalt(II) tetraphenylporphyrin on au(111): mixed composition films

Binary thin films of cobalt(II) phthalocyanine (CoPc) and cobalt(II) tetraphenylporphyrin (CoTPP) were prepared at submonolayer coverage on Au(111)/mica substrates byvapor deposition. All sample preparation and analysis were done under an ultrahigh vacuum. Scanning tunneling microscopy (STM) constant-current images of CoPc/CoTPP mixtures showed two close-packed surface structures, with different compositional percentages and some disorder. CoPc was also observed exclusively in one-dimensional chains and as single, isolated molecules below 220 K. Occupied and unoccupied orbital energy levels were identified by STM and tunnel-diode-based orbital-mediated tunneling spectroscopy. Occupied energy levels were also confirmed by ultraviolet photoelectron spectroscopy. The transient oxidation of the Co d(z2) orbital is identified in STM dI/dV(V) curves just negative of the 0 V sample bias for both molecules. Nearly identical constant-current contours are observed over the central Co2+ ions of CoTPP and CoPc, indicating that the attenuation of the d(z)2 orbital-mediated tunneling current induced by the structure of TPP relative to Pc is at most a factor of about 10. The orbital-mediated tunneling spectra of CoTPP and CoPc are distinctly different and allow these structurally similar species to be differentially identified.