Structural and optical characterizations of rare earth pentaphosphates LnP5O14 (Ln = La, Gd) synthesized by the sol–gel process

The sol–gel chemistry route has successfully been used to prepare samples of LnP₅O₁₄ (Ln = La, Gd) pentaphosphates from lanthanides chlorides and phosphorous pentoxide dissolved in isopropanol. Crystallized powders of single phase were obtained after calcination of gels at 350 °C. The structural characterizations of materials were investigated by means of X-ray diffraction as well as infrared and Raman spectroscopies, whereas their thermal behavior has been studied by differential thermal analyse and thermogravimetric analyses. Powders morphology was analyzed by means of scanning electron microscopy and laser granulometry. The photoluminescence properties of the Eu³⁺ ions in sol–gel derived LaP₅O₁₄ and GdP₅O₁₄ samples were investigated and compared with homologous samples synthesized by the conventional solid state reaction.     

Controlled Synthesis of Thorium and Uranium Oxide Nanocrystals

Very little is known about the size and shape effects on the properties of actinide compounds. As a consequence, the controlled synthesis of well‐defined actinide‐based nanocrystals constitutes a fundamental step before studying their corresponding properties. In this paper, we report on the non‐aqueous surfactant‐assisted synthesis of thorium and uranium oxide nanocrystals. The final characteristics of thorium and uranium oxide nanocrystals can be easily tuned by controlling a few experimental parameters such as the nature of the actinide precursor and the composition of the organic system (e.g., the chemical nature of the surfactants and their relative concentrations). Additionally, the influence of these parameters on the outcome of the synthesis is highly dependent on the nature of the actinide element (thorium versus uranium). By using optimised experimental conditions, monodisperse isotropic uranium oxide nanocrystals with different sizes (4.5 and 10.7 nm) as well as branched nanocrystals (overall size ca. 5 nm), nanodots (ca. 4 nm) and nanorods (with ultra‐small diameters of 1 nm) of thorium oxide were synthesised.     

New series of acridines and phenanthrolines: synthesis and characterization

New series of acridines and phenanthrolines have been prepared from β-chlorovinyl aldehydes and various aniline derivatives allowing the installation of valuable substituents, such as ketone, nitro or amino groups at the heterocyclic core. X-ray analyses confirmed the structures of acridines and phenanthrolines as well as the presence of partially hydrogenated rings and their crucial impact on the overall shape of the acridine-based architectures. ¹H NMR revealed the helical behaviour of several acridine motives. Comparison of UV data between architectures and influence of number of partially hydrogenated rings is also described.     

van der Waals corrected density functional calculations of the adsorption of benzene on the Cu (111) surface

We investigate the performance of several van der Waals (vdW) functionals at calculating the interactions between benzene and the copper (111) surface, using the local orbital approach in the SIESTA code. We demonstrate the importance of using surface optimized basis sets to calculate properties of pure surfaces, including surface energies and the work function. We quantify the errors created using (3 × 3) supercells to study adsorbate interactions using much larger supercells, and show non‐negligible errors in the binding energies and separation distances. We examine the eight high‐symmetry orientations of benzene on the Cu (111) surface, reporting the binding energies, separation distance, and change in work function. The optimized vdW‐DF(optB88‐vdW) functional provides superior results to the vdW‐DF(revPBE) and vdW‐DF2(rPW86) functionals, and closely matches the experimental and experimentally deduced values. This work demonstrates that local orbital methods using appropriate basis sets combined with a vdW functional can model adsorption between metal surfaces and organic molecules.     

Rational Development of a Metal-Free Bifunctional System for the C−H Activation of Methane: A Density Functional Theory Investigation

The activation or heterolytic splitting of methane, a challenging substrate usually restricted to transition metals, has so far proven elusive in experimental frustrated Lewis pair (FLP) chemistry. In this article, we demonstrate, using density functional theory (DFT), that 1-aza-9-boratriptycene is a conceptually simple intramolecular FLP for the activation of methane. Systematic comparison with other FLP systems allows to gain insight into their reactivity with methane. The thermodynamics and kinetics of methane activation are interpreted by referring to the analysis of the natural charges and by employing the distortion-interaction/activation strain (DIAS) model. These showed that the nature of the Lewis base influences the selectivity over the reaction pathway, with N Lewis bases favoring the deprotonation mechanism and P bases the hydride abstraction one. The lower barrier of activation for 1-aza-9-boratriptycene and the higher products stability are due to a better interaction energy than its counterparts, itself due to electrostatic interactions with the methane moiety, favorable orbital overlaps allowed by the side-attack, and space proximity between the B and N atoms.     

Controlling speckle using lenses and free space

The correlation properties of speckle fields are studied for general paraxial systems. The previous studies on lateral and longitudinal speckle size for the case of free-space propagation (Fresnel transform) are generalized to the case of the linear canonical transform. These results have implications for the control of speckle size, through appropriate design of optical systems, with particular relevance for speckle interferometry.     

Stereoselective Remote Functionalization via Palladium-Catalyzed Redox-Relay Heck Methodologies

Exploration of novel, three-dimensional chemical space is of growing interest in the drug discovery community and with this comes the challenge for synthetic chemists to devise new stereoselective methods to introduce chirality in a rapid and efficient manner. This Minireview provides a timely summary of the development of palladium-catalyzed asymmetric redox-relay Heck-type processes. These reactions represent an important class of transformation for the selective introduction of remote stereocenters, and have risen to prominence over the past decade. Within this Minireview, the vast scope of these transformations will be showcased, alongside applications to pharmaceutically relevant chiral building blocks and drug substances. To complement this overview, a mechanistic summary and discussion of the current limitations of the transformation are presented, followed by an outlook on future areas of investigation.     

Synthesis and Properties of Semiconducting Bispyrrolothiophenes for Organic Field‐Effect Transistors

A series of new highly soluble bispyrrolothiophenes were synthesized from vinyl azides by using transition‐metal‐catalyzed C?H‐bond functionalization. In addition to modifying the substituents present on the end‐pyrrolothiophene moieties, the arene linker in between the two units was also varied. The solution‐state properties and field‐effect‐transistor (FET) electrical behavior of these bispyrrolothiophenes was compared. Our investigations identified that the optical properties and oxidation potential of our compounds were dominated by the pyrrolothiophene unit with a λ_max value of approximately 400 nm and oxidation at approximately 1 V. FET devices constructed with thin films of these bispyrrolothiophenes were also fabricated by means of thin‐film solution processing. One of these compounds, a bispyrrolothiophene linked with benzothiodiazole, exhibits a mobility of approximately 0.3 cm² V^?1 s^?1 and the I_on/I_off value is greater than 10⁶.     

Inorganic–Organic Heteropolyacid–Gold(I) Hybrids: Structures and Catalytic Applications

Gold(I)‐polyoxometalate hybrid complexes 1 – 4 ([PPh₃AuMeCN]_xH_4?xSiW₁₂O₄₀, x=1–4) were synthesized and characterized. The structure of the primary gold(I)–polyoxometalate 1 (x=1) was fully ascertained by XRD, FTIR, ³¹P and ²⁹Si magic‐angle spinning (MAS) NMR, mass spectroscopy, and SEM–energy dispersive X‐ray spectroscopy (EDX) techniques. Moreover, this complex exhibited better catalytic activity and selectivity compared with standard, homogeneous, gold catalysts in the new rearrangement of propargylic gem‐diesters.     

Ultra‐Small Plutonium Oxide Nanocrystals: An Innovative Material in Plutonium Science

Apart from its technological importance, plutonium (Pu) is also one of the most intriguing elements because of its non‐conventional physical properties and fascinating chemistry. Those fundamental aspects are particularly interesting when dealing with the challenging study of plutonium‐based nanomaterials. Here we show that ultra‐small (3.2±0.9 nm) and highly crystalline plutonium oxide (PuO₂) nanocrystals (NCs) can be synthesized by the thermal decomposition of plutonyl nitrate ([PuO₂(NO₃)₂] ? 3 H₂O) in a highly coordinating organic medium. This is the first example reporting on the preparation of significant quantities (several tens of milligrams) of PuO₂ NCs, in a controllable and reproducible manner. The structure and magnetic properties of PuO₂ NCs have been characterized by a wide variety of techniques (powder X‐ray diffraction (PXRD), X‐ray absorption fine structure (XAFS), X‐ray absorption near edge structure (XANES), TEM, IR, Raman, UV/Vis spectroscopies, and superconducting quantum interference device (SQUID) magnetometry). The current PuO₂ NCs constitute an innovative material for the study of challenging problems as diverse as the transport behavior of plutonium in the environment or size and shape effects on the physics of transuranium elements.