The application of an in vitro gastrointestinal extraction to assess the oral bioaccessibility of polycyclic aromatic hydrocarbons in soils from a former industrial site

The total and bioaccessible concentration of 16 polycyclic aromatic hydrocarbons (PAHs) in soil from a former industrial site was investigated. Typical total concentrations across the sampling sites ranged from 1.5 mg kg⁻¹ for acenaphthylene up to 243 mg kg⁻¹ for fluoranthene. The oral bioaccessibility of PAHs in soil was assessed using an in vitro gastrointestinal extraction (Fed Organic Estimation human Simulation Test, FOREhST method). The oral bioaccessibility data indicated that fluorene, phenanthrene, chrysene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene had the highest % bioaccessible fraction (based on their upper 75th percentile values being >60%) while the other PAHs had lower % bioaccessible fractions (means ranging between 35 and 59%). Significantly lower bioaccessibilities were determined for naphthalene. With respect to method validation and inter-laboratory comparison, the total and bioaccessible concentrations of benzo(a)anthracene, benzo(b)anthracene, benzo(k)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene was compared to published data derived using the same samples. The total PAH concentrations at the site were compared with generic assessment criteria (GAC) using the residential land use scenario (with plant uptake at 6% soil organic matter). Concentrations of 7 of the PAHs investigated within the soils could lead to an unacceptable risk to human health at this site.     

Infrared and Raman spectroscopic characterization of the phosphate mineral kosnarite KZr2(PO4)3 in comparison with other pegmatitic phosphates

In this research, we have used vibrational spectroscopy to study the phosphate mineral kosnarite KZr₂(PO₄)₃. Interest in this mineral rests with the ability of zirconium phosphates (ZP) to lock in radioactive elements. ZP have the capacity to concentrate and immobilize the actinide fraction of radioactive phases in homogeneous zirconium phosphate phases. The Raman spectrum of kosnarite is characterized by a very intense band at 1,026?cm^?1 assigned to the symmetric stretching vibration of the PO₄ ^3? ??₁ symmetric stretching vibration. The series of bands at 561, 595 and 638?cm^?1 are assigned to the ??₄ out-of-plane bending modes of the PO₄ ^3? units. The intense band at 437?cm^?1 with other bands of lower wavenumber at 387, 405 and 421?cm^?1 is assigned to the ??₂ in-plane bending modes of the PO₄ ^3? units. The number of bands in the antisymmetric stretching region supports the concept that the symmetry of the phosphate anion in the kosnarite structure is preserved. The width of the infrared spectral profile and its complexity in contrast to the well-resolved Raman spectrum show that the pegmatitic phosphates are better studied with Raman spectroscopy.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

Synthesis and reactivity of enantiomerically pure N-alkyl-2-alkenyl azetidinium salts

A synthesis of stereodefined enantiomerically pure 2-alkenyl azetidines is described using Wittig olefination as key step. The quaternary triflate ammonium salts of these heterocycles were prepared in a stereoselective way and treatment of these azetidinium salts with a base (KHMDS or PhLi) induced a regioselective Stevens rearrangement leading to a 3-alkenyl pyrrolidine. An unprecedented S_N2′ reaction involving phenyllithium as nucleophile and an ammonium as leaving group was observed in one case.     

Synthesis and evaluation of stereopure α-trifluoromethyl-malic hydroxamates as inhibitors of matrix metalloproteinases

The total synthesis of trifluoromethyl (Tfm) analogs of known nanomolar matrix metalloproteinases (MMPs) inhibitors has been performed. The synthetic protocol is based on a moderately stereoselective aldol reaction of trifluoropyruvate with an N-acyl-oxazolidin-2-thione for the construction of the core α-Tfm-malic unit. Both the diastereomeric forms of the target α-Tfm-malic hydroxamates showed micromolar inhibitory potency toward MMP-2 and 9, with a substantial drop with respect to the parent unfluorinated compounds.     

Observation of an Organic Acid Mediated Spin State Transition in a Co(II)-Schiff Base Complex: An EPR, HYSCORE, and DFT Study

The interactions of a weak organic acid (acetic acid, HOAc) with a toluene solution of the Co(II)-Schiff base type complex, (R,R')-N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexane-diamino Co(II) (labeled [Co(1)]), was investigated using EPR, HYSCORE, and DFT computations. This activated [Co(II)(1)] system is extremely important within the context of asymmetric catalysts (notably the hydrolytic kinetic resolution of epoxides) despite the lack of detailed structural information about the nature of the paramagnetic species present. Under anaerobic conditions, the LS [Co(II)(1)] complex with a |yz, (2)A(2)? ground state is converted into a low-spin (LS) and a high-spin (HS) complex in the presence of the acid. The newly formed LS state is assigned to the coordinated [Co(II)(1)]-(HOAc) complex, possessing a |z(2), (2)A(1)? ground state (species A; g(x) = 2.42, g(y) = 2.28, g(z) = 2.02, A(x) = 100, A(y) = 120, A(z) = 310 MHz). The newly formed HS state is assigned to an acetate coordinated [Co(II)(1)]-(OAc(-)) complex, possessing an S = (3)/(2) spin ground state (species B, responsible for a broad EPR signal with g ≈ 4.6). These spin ground states were confirmed with DFT calculations using the hybrid BP86 and B3LYP functionals. Under aerobic conditions, the LS and HS complexes (species A and B) are not observed; instead, a new HS complex (species C) is formed. This complex is tentatively assigned to a paramagnetic superoxo bridged dimer (AcO(-))[Co(II)(1)···O(2)(-)Co(III)(1)](HOAc), as distinct from the more common diamagnetic peroxo bridged dimers. Species C is characterized by a very broad HS EPR signal (g(x) = 5.1, g(y) = 3.9, g(z) = 2.1) and is reversibly formed by oxygenation of the LS [Co(II)(1)]-(HOAc) complex to the superoxo complex [Co(III)(1)O(2)(-)](HOAc), which subsequently forms the association complex C by interaction with the HS [Co(II)(1)](OAc(-)) species. The LS and HS complexes were also identified using other organic acids (benzoic and propanoic acid). Thermal annealing-quenching experiments revealed the additional presence of [Co(III)(1)O(2)(-)](HOAc) adducts, corroborating the presence of species C and the presence of diamagnetic dimer complexes in the solution, such as the EPR silent (HOAc)[Co(III)(1)(O(2)(2-))Co(III)(1)](HOAc). Overall, it appears that a facile interconversion of the [Co(1)] complex, possessing a LS ground state, occurs in the presence of acetic acid, producing both HS and LS Co(II) states, prior to formation of the oxidized active form of the catalyst, [Co(III)(1)](OAc(-)).     

Photo-actuation of liquids for light-driven microfluidics: state of the art and perspectives

Using light to control liquid motion is a new paradigm for the actuation of microfluidic systems. We review here the different principles and strategies to induce or control liquid motion using light, which includes the use of radiation pressure, optical tweezers, light-induced wettability gradients, the thermocapillary effect, photosensitive surfactants, the chromocapillary effect, optoelectrowetting, photocontrolled electroosmotic flows and optical dielectrophoresis. We analyze the performance of these approaches to control using light many kinds of microfluidic operations involving discrete pL- to μL-sized droplets (generation, driving, mixing, reaction, sorting) or fluid flows in microchannels (valve operation, injection, pumping, flow rate control). We show that a complete toolbox is now available to control microfluidic systems by light. We finally discuss the perspectives of digital optofluidics as well as microfluidics based on all optical fluidic chips and optically reconfigurable devices.