The Application of TD/GC/NICI–MS with an Al2O3-PLOT-S Column for the Determination of Perfluoroalkylcycloalkanes in the Atmosphere

A modified method for the quantitative determination of atmospheric perfluoroalkylcycloalkanes (PFCs) using thermal desorption coupled with gas chromatography and detection by negative ion chemical ionization–mass spectrometry was developed. Using an optimized analytical system, a commercially available Al₂O₃ porous layer open tubular (PLOT) capillary column (30 m × 0.25 mm) deactivated with Na₂SO₄ was used for separation of PFCs. Improvements in the separation of PFCs, the corresponding identification and the limit of detection of PFCs using this method and column are presented. The method was successfully applied to determine the atmospheric background concentrations of a range of PFCs from a number of samples collected at a rural site in Germany. The results of this study suggest that the method outlined using the Al₂O₃-PLOT-S capillary column has good sensitivity and selectivity, and that it can be deployed in a routine laboratory process for the analysis of PFCs in the future research work. In addition, the ability of this column to separate the isomers of one of the lower boiling PFCs (perfluorodimethylcyclobutane) and its ability to resolve perfluoroethylcyclohexane offer the opportunity for single-column analysis for multiple PFCs.     

Quantitative determination of fucoidan using polyion-sensitive membrane electrodes

The use of polyanion and polycation-sensitive membrane electrodes to detect five different preparations of fucoidan is described. Unlike linear polyanionic molecules previously measured with polymer membrane-based electrochemical sensors, fucoidans from marine brown algae are all highly branched, sulfated polysaccharides with varying charge densities and structures, depending on the species of seaweed, method of extraction used and extent of purification. When tridodecylmethylammonium (TDMA) was used as the ion-exchanger, a large, non-equilibrium EMF response was observed over a concentration range of 0.5–50 μg mL⁻¹ fucoidan. Fucoidan was also measured by titration with polycationic protamine, using a dinonylnaphthalene sulfonate (DNNS)-doped membrane electrode as the potentiometric endpoint detector. Potentiometric titration was used to determine the binding ratio between protamine and fucoidan at the neutralization endpoint for each fucoidan preparation. This binding ratio was then used to successfully determine the fucoidan content of commercially available nutritional supplements. Fucoidan was also measured in undiluted blood serum, demonstrating that this method may be applicable for measuring fucoidan for clinical applications.     

BODIPY: A Highly Versatile Platform for the Design of Bimodal Imaging Probes

In molecular imaging, multimodal imaging agents can provide complementary information, for improving the accuracy of disease diagnosis or enhancing patient management. In particular, optical/nuclear imaging may find important preclinical and clinical applications. To simplify the preparation of dual‐labeled imaging agents, we prepared versatile monomolecular multimodal imaging probe (MOMIP) platforms containing both a fluorescent dye (BODIPY) and a metal chelator (polyazamacrocycle). One of the MOMIP was conjugated to a cyclopeptide (i.e., octreotide) and radiolabeled with ¹¹¹In. In vitro and in vivo studies of the resulting bioconjugate were conducted, highlighting the potential of these BODIPY‐based bimodal probes. This work also confirmed that the biovector and/or the bimodal probes must be chosen carefully, due to the impact of the MOMIP on the overall properties of the resulting imaging agent.     

From the N‐Heterocyclic Carbene‐Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates

Among various N‐heterocyclic carbenes (NHCs) tested, only 1,3‐bis(tert‐butyl)imidazol‐2‐ylidene (NHC^tBu) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC‐catalyzed 1,4‐addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well‐defined α‐alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]₀/[ROH]₀ molar ratio, were ultimately obtained in N,N‐dimethylformamide at 25 °C. A hydroxyl‐terminated poly(ethylene oxide) (PEO‐OH) macro‐initiator was also employed to directly access PEO‐b‐PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC^tBu.     

An Accurate In Vitro Model of the E. coli Envelope

Gram‐negative bacteria are an increasingly serious source of antibiotic‐resistant infections, partly owing to their characteristic protective envelope. This complex, 20 nm thick barrier includes a highly impermeable, asymmetric bilayer outer membrane (OM), which plays a pivotal role in resisting antibacterial chemotherapy. Nevertheless, the OM molecular structure and its dynamics are poorly understood because the structure is difficult to recreate or study in vitro. The successful formation and characterization of a fully asymmetric model envelope using Langmuir–Blodgett and Langmuir–Schaefer methods is now reported. Neutron reflectivity and isotopic labeling confirmed the expected structure and asymmetry and showed that experiments with antibacterial proteins reproduced published in vivo behavior. By closely recreating natural OM behavior, this model provides a much needed robust system for antibiotic development.     

Void‐Assisted Ion‐Paired Proton Transfer at Water–Ionic Liquid Interfaces

At the water–trihexyl(tetradecyl)phosphonium tris(pentafluoroethyl)trifluorophosphate ([P_14,6,6,6][FAP]) ionic liquid interface, the unusual electrochemical transfer behavior of protons (H⁺) and deuterium ions (D⁺) was identified. Alkali metal cations (such as Li⁺, Na⁺, K⁺) did not undergo this transfer. H⁺/D⁺ transfers were assisted by the hydrophobic counter anion of the ionic liquid, [FAP]^?, resulting in the formation of a mixed capacitive layer from the filling of the latent voids within the anisotropic ionic liquid structure. This phenomenon could impact areas such as proton‐coupled electron transfers, fuel cells, and hydrogen storage where ionic liquids are used as aprotic solvents.     

A Biomimetic Heteroditopic Receptor for Zwitterions in Protic Media

The efficient synthesis of calix[6]cryptothiourea 6 was achieved through a two‐step sequence that involves a key [1+1] macrocyclization step. It was shown by NMR spectroscopy that this heteroditopic receptor can bind zwitterions in protic media with an outstanding selectivity for β‐alanine betaine G5 , which is likely due to a high complementarity between the two partners. This result constitutes a rare example of cavity complexation of a zwitterion by a calix[6]arene. In comparison with the parent urea‐based receptors, 6 behaves as a much more efficient host for betaines. This strengthening of the binding properties is due to the better preorganization of the tripodal hydrogen‐bonding cap as well as to the higher acidity of the thiourea groups and their poor ability to self‐associate. Remarkably, host 6 is able to perform solid–liquid as well as liquid–liquid extraction of G5 . Finally, 6 provides an excellent structural model for the binding site of glycine betaine G4 encountered in natural systems.     

1D NMR Homodecoupled 1H Spectra with Scalar Coupling Constants from 2D NemoZS‐DIAG Experiments

A two‐dimensional liquid‐state NMR experiment cleanly separating chemical shifts and scalar couplings information is introduced. This DIAG experiment takes advantage of a drastic reduction of the spectral window in the indirect dimension to be quickly recorded and of a new non‐equidistant modulation of the selective pulse to improve the sensitivity of the broadband homodecoupling Zangger–Sterk sequence element by one order of magnitude. A simple automatic analysis results in 1D spectra displaying singlets and lists of the scalar couplings for first‐order multiplets. This facilitates the analysis of 1D spectra by resolving multiplets based on their differences in chemical shifts and coupling structures.     

A Ruthenium(II)–Copper(II) Dyad for the Photocatalytic Oxygenation of Organic Substrates Mediated by Dioxygen Activation

Dioxygen activation by copper complexes is a valuable method to achieve oxidation reactions for sustainable chemistry. The development of a catalytic system requires regeneration of the Cu^I active redox state from Cu^II. This is usually achieved using extra reducers that can compete with the Cu^II(O₂) oxidizing species, causing a loss of efficiency. An alternative would consist of using a photosensitizer to control the reduction process. Association of a Ru^II photosensitizing subunit with a Cu^II pre‐catalytic moiety assembled within a unique entity is shown to fulfill these requirements. In presence of a sacrificial electron donor and light, electron transfer occurs from the Ru^II center to Cu^II. In presence of dioxygen, this dyad proved to be efficient for sulfide, phosphine, and alkene catalytic oxygenation. Mechanistic investigations gave evidence about a predominant ³O₂ activation pathway by the Cu^I moiety.     

Solubility and Crystallizability: Facile Access to Functionalized π‐Conjugated Compounds with Chlorendylimide Protecting Groups

Functional π‐conjugated molecules are relevant for the preparation of new organic electronic materials with improved performance. However, their synthesis is often rendered difficult by their inherently low solubility, and the permanent attachment of solubilizing groups may change the properties of the material. Here, we introduced the chlorendylimidyl moiety as a new temporary protecting group for the straightforward large‐scale synthesis of protected quarter‐, sexi‐, octathiophene, and perylene bisimide diamine and dicarboxylic acid derivatives. The obtained chlorendylimides and chlorendylimidyl active esters were highly soluble in organic solvents, and optical spectroscopy confirmed the low tendency of the compounds to aggregate in solution. At the same time, they could be conveniently purified by recrystallization or precipitation. Single‐crystal X‐ray structures obtained for most compounds showed supramolecular motifs highlighting the role of the rigid, polychlorinated chlorendyl moieties in their crystallization. The obtained protected diamine and dicarboxylic acid derivatives were easily deprotected and converted into various amide‐substituted oligothiophenes and perylene bisimides that are of interest as new functional materials for organic electronic thin film or nanowire devices.