Selenium Nanoparticles Prepared from Reverse Microemulsion Process

Selenium nanoparticles were prepared by a reverse microemulsion system. Sodium selenosulfate was used as selenium source. The results showed that hydrochloric acid concentration and reaction temperature had great influence on the morphology of products. The crystalline selenium nanowires and amorphous selenium nanorods were obtained in given condition.     

一种利用质谱信息进行结构特征鉴定的模式识别方法

本文提出了分段式离子系列谱编码方法,实验证明具有很好的结构表征能力。本程序主要是以模式识别技术为基础,实现了对未知物谱图的KNN分类,进而得到未知物的主要结构特征。这个程序应用于有机化合物的分类,取得了满意的结果。     

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.     

EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.     

1,2,4-三苯基环戊二烯的合成及其烷基化反应

测定了颇哪醇在酸性条件下所得的脱水产物的分子结构.结果表明,在酸性条件下颇哪醇的脱水反应优于重排反应,由此合成了1,2,4-三苯基环戊二烯.该环戊二烯衍生物的烷基化反应,在通常条件下优先发生在碳环的第5位碳原子上,但在苛刻的剧烈反应条件下,进而发生在碳环的第3位碳原子上.讨论了脱水反应和烷基化反应的机理.     

FFC-1离子交换纤维物理化学性能的研究

利用扫描电镜、热失重-红外、元素分析、低温氮吸附等技术和化学手段对聚羧酸基FFC-1离子交换纤维的结构与性能特点等进行了系统研究．结果表明：FFC-1离子交换纤维为含适量酰肼类交联键的聚羧酸(钠)型离子交换材料，外比表面积大和传质距离短是其反应动力学性能优异的主要原因，FFC-1纤维具有良好的化学与热稳定性。在5mol/L硫酸、硝酸、盐酸和2mol／L氢氧化钠溶液中浸泡，交换容量未见明显降低。但过氧化氢溶液对其功能基有明显破坏，CO2为FFC-1纤维在高温区间(300℃～350℃)的主要分解产物。     

Synthesis and Crystal Structure of a Novel Compound of （C2N2H8O2） H6V10O28

A novel vanadate decamer, involving all vanadium atoms present in +5 oxidation and one formhydroxamic acid dimer cation readical, has been synthesized. The single-crystal X-ray diffraction shows that the orange crystal is formed in the triclinic system, space group Pi, a = 8. 4960 (17), b = 10.447 (2), c = 11.299 (2) A, α= 68. 82 (3)°,β= 87.35 (3)°, γ = 66.97(3)°. V = 855. 3(3) A3, Z = 8, R1 = 0. 0857, wR2=0. 2551. X-ray crystallographic and packing in superlattice studies showed that the crystal structure was constructed by electrostatic attraction of O-H…O hydrogen bonds between formhydroxamic acid dimer cation and decavanadate polyanion. Formhydroxamic acid dimer is got through controlling the condition of the reaction using formhydroxamic acid.     

Photoinduced self-substitution of haloquinones

A series of novel oligo(halobenzoquinoid) compounds have been obtained from the photoinduced self-substitution of 2,5-dibromo-1,4-benzoquinone (1a), 2,6-dibromo-1,4-benzoquinone (1b), 2-chloro-1,4-benzoquinone (1c), 2-bromo-5-chloro-1,4-benzoquinone (1d), 2,3,5,6-tetrachloro-1,4-benzoquinone (1e) and 1,4-benzoquinone (1f) in the presence of N,N-dimethyl-t-butylamine (2) in acetonitrile. Dimers, trimers and/or pentamers of these haloquinones were found to be the major products.     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

牛血清白蛋白在NVP/HEMA无规共聚物水凝胶上的吸附研究

合成了不同含水量的N-乙烯吡咯烷酮(NVP)／甲基丙烯酸-β-羟乙酯(HEMA)共聚物水凝胶．研究了温度、pH值，蛋白质初浓度及离子强度等因素对牛血清白蛋白吸附性能的影响．采用紫外分光光度法测定BSA的吸附量．结果表明，蛋白质初浓度越高．温度越高，离子强度越大；蛋白质内部更多的疏水性氧基酸残基暴露于外部．吸附量增加：在等电点pH=4．7附近蛋白质沉积量最大．