Effect of wind-generated waves on the transfer of solar radiation in the atmosphere-ocean system

Transfer of solar radiation in the combined atmosphere and ocean system is evaluated by the matrix operator method. Derivation of the reflection and transmission matrices required for applying the matrix method is discussed introducing the shadowing effect of light by the ocean waves. Spectral and total radiation fields just above and below the ocean surface, as well as the top of the atmosphere, are numerically calculated using several optical models of the atmosphere, ocean, and wind roughened ocean surface. Dependencies of radiance and flux reflectivity on the wind velocity and optical property of the ocean body are discussed in detail.     

Magnetoresistance of Fe3O4/Au/Fe3O4 and Fe3O4/Au/Fe spin-valve structures

A detailed study of the in-plane magnetotransport properties of spin valves with one and two Fe₃O₄ electrodes is presented. Fe₃O₄/Au/Fe₃O₄ spin valves exhibit a clear anisotropic magnetoresistance in small magnetic fields but no giant magnetoresistance (GMR). The absence of GMR in these structures is due to simultaneous magnetization reversal in the two Fe₃O₄ layers. By contrast, a negative GMR effect is measured on Fe₃O₄/Au/Fe spin valves. The negative GMR is attributed to an electron spin scattering asymmetry at the Fe₃O₄/Au interface or an induced spin scattering asymmetry in the Au interfacial layers.     

Self-Injection and Acceleration of Monoenergetic Electron Beams from Laser Wakefield Accelerators in a Highly Relativistic Regime

Self-injection and acceleration of monoenergetic electron beams from laser wakefield accelerators are first investigated in the highly relativistic regime, using 100 TW class, 27 fs laser pulses. Quasi-monoenergetic multi- bunched beams with energies as high as multi-hundredMeV are observed with simultaneous measurements of side-scattering emissions that indicate the formation of self-channelfing and self-injection of electrons into a plasma wake, referred to as a ＇bubble＇. The three-dimensional particle-in-cell simulations confirmed multiple self-injection of electron bunches into the bubble and their beam acceleration with gradient of 1.5 GeV/cm.     

Alloyed Tetranuclear Metal Chains of Pd4−nPtn (n=0–3) Scaffolded by a New Linear Tetraphosphine Containing a PNP Bridge

A new linear tetraphosphine containing a PNP phosphazane bridge, rac-bis[(diphenylphosphinomethyl)phenylphosphino]phenylamine (rac-dpmppan), was synthesized and utilized to support a series of Pd/Pt mixed metal tetranuclear chains, [Pd_4−nPt_n(μ-rac-dpmppan)₂(XylNC)₂](PF₆)₂ (XylNC=xylyl isocyanide; n=0: Pd₄ ( 1 ), 1: PtPd₃ ( 2 ), 2: PtPd₂Pt ( 3 ), 2: Pt₂Pd₂ ( 4 ), 3: Pt₂PdPt ( 5 )), in which the number and positions of additional Pt atoms were successfully controlled depending on the respective synthetic procedures using transformations from 1 to 3 through 2 and from 4 to 5 by redox-coupled exchange reactions. The ³¹P{¹H} NMR and ESI mass spectra and X-ray diffraction analyses revealed almost identical tetranuclear structures, with slight contraction of metal-metal bonds according to incorporation of Pt atoms. The electronic absorption spectra of 1 – 5 exhibited characteristic bands at 635–510 nm with an energy propensity depending on the number and positions of Pt centres, which were assigned to HOMO (dσ*σσ*) to LUMO (dσ*σ*σ*) transition by theoretical calculations. The present results demonstrated that the electronic structures of Pd/Pt mixed-metal tetranuclear complexes are finely tuned as orbital-overlapping alloyed metal chains by atomically precise Pt incorporation in the Pd₄ chain.     

Investigating the Dynamic Viscoelasticity of Single Polymer Chains using Atomic Force Microscopy

In single‐molecule force spectroscopy (SMFS), many studies have focused on the elasticity and conformation of polymer chains, but little attention has been devoted to the dynamic properties of single polymer chains. In this study, we measured the energy dissipation and elastic properties of single polystyrene (PS) chains in toluene, methanol, and N,N‐dimethylformamide using a homemade piezo‐control and data acquisition system externally coupled to a commercial atomic force microscope (AFM), which provided more accurate information regarding the dynamic properties of the PS chains. We quantitatively measured the chain length‐dependent changes in the stiffness and viscosity of a single chain using a phenomenological model consistent with the theory of viscoelasticity for polymer chains in dilute solution. The effective viscosity of a polymer chain can be determined using the Kirkwood model, which is independent of the intrinsic viscosity of the solvent and dependent on the interaction between the polymer and solvent. The results indicated that the viscosity of a single PS chain is dominated by the interaction between the polymer and solvent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1736–1743     

Synthesis of All Stereoisomers of Monomeric Spectomycin A1/A2 and Evaluation of Their Protein SUMOylation-Inhibitory Activity

A synthetic methodology to access all possible stereoisomers of spectomycin A1 (SMA1) and A2 (SMA2) has been established through late-stage diversification. The key reaction for the construction of all four diastereomers is an intramolecular cyclization based on the umpolung of π-allyl palladium species with bis(pinacolato)diborane (B₂(pin)₂). Silyl group assisted direct benzylic oxidation of each isomer enabled construction of the fragile β-hydroxytetralone skeleton to provide the SMAs. The relative and absolute stereochemistry of SMA2 was also determined, and the absolute stereochemistry of SMA1 was extrapolated based on the optical rotation of SMA2. The axial chirality of SMAs is discussed based on circular dichroism spectra and DFT calculations, and it is concluded that the M isomer is predominant in solution. Biochemical assessment of all isomers in vitro revealed that the C9 hydroxyl group and dimeric structure were both important for protein SUMOylation-inhibitory activity.     

Injectable Polypeptide Hydrogel Depot System for Assessment of the Immune Response–Inducing Efficacy of Sustained Antigen Release Alone

Vaccines typically contain an antigen, delivery system (vehicle), and adjuvant, all of which contribute to inducing a potent immune response. Consequently, design of new vaccines is difficult, because the contributions and interactions of these components are difficult to distinguish. Here, it is aimed to develop an easy‐to‐use, non‐immunogenic, injectable depot system for sustained antigen release that will be suitable for assessing the efficacy of prolonged antigen exposure per se for inducing an immune response. This should mimic real‐life infections. Recombinant elastin‐like polypeptides with periodic cysteine residues (cELPs) are selected, which reportedly show little or no immunogenicity, as carriers and tetanus toxoid (Ttd) as an antigen. After subcutaneous injection of the mixture, cELP rapidly forms a disulfide cross‐linked hydrogel in situ, within which Ttd is physically incorporated, affording a biodegradable antigen depot. A series of Ttd‐containing hydrogels is examined. A single injection induces high levels of tetanus antibody with high avidity for at least 20 weeks in mice. The chain length of cELP proves critical, whereas differences in hydrophobicity has little effect, although hydrophilic cELPs are more rapidly biodegraded. This system's ability to distinguish the contribution of sustained antigen release to antibody induction should be helpful for rational design of next‐generation vaccines.     

Total Synthesis of Terpioside B

The first total synthesis of terpioside B ( 1 ) has been accomplished. Key steps include the stereoselective installments of a set of challenging 1,2-cis-glycosidic linkages. Thus, α(1,4)-linked d -galactoside was effectively constructed from a 1,2-anhydrogalactose donor and an unprotected 1,6-anhydrogalactose acceptor by using a boron-mediated aglycon delivery (BMAD) method. In addition, α-l -fucofuranosides were stereoselectively and simultaneously constructed by remote group-assisted 1,2-cis-α-stereoselective glycosylations.     

Flexible and Epitaxial Metal Oxide Thin Film Growth by Photoreaction Processing for Electrical and Optical Applications

This review summarizes the use of photoreactions that replace conventional heating processes for growing oxide thin films from chemical solutions. In particular, this review outlines key variables in photoreactions that affect epitaxial and polycrystalline thin film growth, including precursor materials, laser wavelength, laser fluence, and carbon. In addition, the features of the photoreaction process that can be controlled at a low temperature by oxygen non-stoichiometry are examined. Likewise, functions that are neither achieved by developing a gradient structure nor controlled by a thermal equilibrium reaction are detailed. Two new concepts are presented, known as photoreaction of nanoparticles (PRNP) and photoreaction of a hybrid solutions (PRHS), in which crystal nuclei are pre-dispersed in a metal–organic compound film. This method has successfully produced flexible phosphor films used as resistor or thermistor electronic components. Finally, thin film growth using different light sources such as flash lamps and femtosecond lasers (fs) is explored.     

Hydrophobic Monomers Recognize Microenvironments in Hydrogel Microspheres during Free-Radical-Seeded Emulsion Polymerization

The three-dimensional structure of nanocomposite microgels was precisely determined by cryo-electron micrography. Several nanocomposite microgels that differ with respect to their nanocomposite structure, which were obtained from seeded emulsion polymerization in the presence of microgels, were used as model nanocomposite materials for cryo-electron micrography. The obtained three-dimensional segmentation images of these nanocomposite microgels provide important insights into the interactions between the hydrophobic monomers and the microgels, that is, hydrophobic styrene monomers recognize molecular-scale differences in polarity within the microgels during the emulsion polymerization. This result led to the formation of unprecedented multi-layered nanocomposite microgels, which promise substantial potential in colloidal applications.