Synthetic Study of (−)‐Norzoanthamine: Construction of the ABC Ring Moiety

Throw your hat in the ring : A highly diastereoselective synthesis of the ABC rings of (?)‐norzoanthamine has been achieved starting from the (?)‐Hajos–Parrish ketone (see scheme). Three asymmetric quaternary carbon centers on the C ring were constructed by a 1,4‐addition, and an intramolecular Diels–Alder reaction provided a trans‐decalin scaffold on the AB rings.

     

CpCo(dithiolene) complexes of highly flexible oxddt ligand with two different Z-shaped and U-shaped structures

[CpCo(oxddt)] complex (2, oxddt = o-xylenediyldithioethylene-1,2-dithiolate, Cp = η⁵-cyclopentadienyl) was obtained from o-xylenediyldithioethylene-1,3-dithiol-2-one (OC(oxddt)) (1). 2 further reacted with diazoalkanes (N₂CHR) to form some alkylidene-bridged adducts [CpCo(CHR)(oxddt)] (R = H (3a), SiMe₃ (3b)). Adduct 3a further reacted with protic acids (HX) to give some S-methylated adducts [CpCo(X)(oxddt)(S-Me)] (X = Cl (4a), OCOCF₃ (4c)), followed by the Co-C bond cleavage in the three-membered cobaltathiirane ring. Two different Z-shaped and U-shaped molecular structures were observed by X-ray diffraction studies. In the former structure (Z), the dithiolene and o-xylylene planes are located at almost parallel position each other, and in the latter structure (U), both planes are not parallel but the o-xylylene moiety is located closer to the dithiolene plane than the Z-shaped one. The Z-shaped structure involves 1 and 2. The U-shaped structure involves 3a, 3b, 4a and 4c. Complex 1 showed a one-dimensional chain through intermolecular π-π interaction in the crystal. Complex 2 had a dimeric interaction between dithioethylenedithiolate moieties (S₂C₂S₂) in the oxddt. The SiMe₃ group in 3b was placed at an exo-position with respect to the cobaltadithiolene ring due to a steric hindrance from the U-shaped oxddt ligand. In 4a, the X and Me groups are located at the opposite side of the dithiolene plane (anti-form) but in 4c, both groups are presented at the same side of the dithiolene plane (syn-form). The NMR analysis of 4a in solution indicated existence of both anti- and syn-isomers (7:1).     

Diastereoselective syntheses and oxygenation of silyl fulleroids

The addition of silyl diazomethane (1a-d) to fullerene C₆₀ at room temperature provided the mono-adducts, the bis- and tris-adducts of silyl fulleroid (3a-d) in moderate yields. The structures of the silyl fulleroids were characterized by mass spectroscopy, as well as ¹H and ¹³C NMR. The gated ¹H NMR and ¹³C-¹H COLOC analyses of 3a-d showed a correlation between the methine proton resonances and three fullerene carbons. These observations, as well as the ¹H NMR chemical shifts of the methine protons, suggest a remarkable diastereoselectivity, with the silyl groups located above a five-membered ring. Two transition states of the thermal nitrogen-extrusion of pyrazoline intermediate (2a) were theoretically obtained, the structures of which disclosed that the diastereoselectivity is a consequence of minimization of the repulsive interaction between the silyl groups and the N₂ moiety. The bridgehead CC double bond of the silyl fulleroid is thought to be reactive by POAV analyses. The silyl fulleroids (3a,b) were found to react with singlet oxygen to afford the silyl enol ether (9a,b) via 1,3-silyl migration of a diketone (8a,b). This is the first example of ¹O₂ oxygenation of fulleroids.     

Macromolecular Recognition of Cyclodextrin: Inversion of Selectivity of β‐Cyclodextrin toward Adamantyl Groups Induced by Macromolecular Chains

Interaction of β‐cyclodextrin (β‐CD) with alternating copolymers (pAdMA and pAdPhMA) of sodium maleate with adamantyl (Ad) and with adamantylphenyl (AdPh) vinyl ether has been investigated by several NMR techniques. Comparing the apparent association constants (K) for the polymers with the K for the model compounds, which are determined by the analysis of ¹H NMR and isothermal titration calorimetry data, respectively, the selectivities of β‐CD toward Ad and AdPh moieties are contrasting for the model and polymer systems. This phenomenon is described by circular dichroism and 2D NMR as follows; the most stable inclusion complex for the β‐CD/AdPh model system is extremely destabilized for the corresponding polymer system because of competition with hydrophobic interaction between neighboring AdPh moieties.

     

Synthesis,structure, and dynamic behavior of cyclopentadienyl-lithium, -sodium,and -potassium annelated with bicyclo[2.2.2]octene units: a systematic study on site exchange of alkali metals on a cyclopentadienyl ring in tetrahydrofuran

Novel cyclopentadienyl (Cp)-alkali metal complexes 1-M and 2-M (M = Li, Na, K), in which the Cp ring is annelated with two bicyclo[2.2.2]octene units and substituted with a phenyl group for 1 and a tert-butyl group for 2, were synthesized, and their structures and dynamic behaviors were investigated by means of X-ray crystallography, dynamic (13)C NMR, and DFT calculations. The X-ray crystallography results indicated that 1-Li, 1-Na, and 2-Na form monomeric contact ion pairs (CIP) with three THF molecules coordinated to the metal atom. Also, in THF-d(8), all of the 1-M and 2-M form monomeric CIP in the ground state. However, variable-temperature (13)C NMR measurements of 1-M and 2-M in THF-d(8) demonstrated dynamic behavior in which the metal ion exchanges positions between the upper and lower faces of the Cp ring. From a study of the concentration dependence of the dynamic behavior, the exchange was found to proceed principally as an intramolecular process at concentration ranges lower than 0.2 M. The experimentally observed deltaG values for the intramolecular exchange process for all the 1-M and 2-M (except for 2-Li, whose intramolecular process was too slow to observe) were found to be quite similar in THF-d(8) solution and to fall within the range of 12-14 kcal mol(-)(1). Within this range, a tendency was observed for the deltaG values to increase as the size of the metal decreased. Theoretical calculations (B3LYP/6-31G(d)) afforded considerably large values as the gas-phase dissociation energy for 1-M (162.7 kcal mol(-)(1) for M = Li; 131.6 kcal mol(-)(1) for M = Na; 110.9 kcal mol(-)(1) for M = K) and for 2-M (170.0 kcal mol(-)(1) for M = Li; 137.5 kcal mol(-)(1) for M = Na; 115.4 kcal mol(-)(1) for M = K). These values should be compensated for by a decrease in the solvation energies for the metal ions with increasing size, as exemplified by the calculated solvation energy for M(+)(Me(2)O)(4), which serves as a model for metal ions solvated with four molecules of THF (-122.9 kcal mol(-)(1) for M = Li; -94.7 kcal mol(-)(1) for M = Na; -67.7 kcal mol(-)(1) for M = K). This compensation results in a small difference in the overall energy for dissociation of 1-M or 2-M in ethereal solutions, thus supporting the similar deltaG values observed for the intramolecular metal exchange.     

Imaging of enzyme activity by scanning electrochemical microscope equipped with a feedback control for substrate-probe distance

The enzymatic activity of diaphorase (Dp) immobilized on a solid substrate was characterized using a scanning electrochemical microscope (SECM) with shear force feedback to control the substrate-probe distance. The shear force between the substrate and the probe was monitored with a tuning fork-type quartz crystal and used as the feedback control to set the microelectrode probe close to the substrate surface. The sensitivity and the contrast of the SECM image were improved in the constant distance mode (distance, 50 nm) with the shear force feedback compared to the image in the constant height mode without the feedback. By using this system, the SECM and topographic images of the immobilized diaphorase were simultaneously measured. The microelectrode tip used in this study was ground aslant like a syringe needle in order to obtain the shaper topographic images. This shape was also effective for avoiding the interference during the diffusion of the enzyme substrates.     

Novel alkenylative cyclization using a ruthenium catalyst

Novel alkenylative cyclization of enyne was developed using Cp*RuCl(cod) under ethylene gas at room temperature.     

Synthesis and fluorescence properties of difluoro[amidopyrazinato-O,N]boron derivatives: a new boron-containing fluorophore

New boron-containing fluorophores, difluoro[amidopyrazinato-O,N]boron (APB) derivatives, were prepared from amidopyrazines. The fluorescence properties of APB were successfully modulated by an aryl substitution at the C8 position.     

Stereoselective synthesis of the C14-C24 degraded fragment of symbiodinolide

Symbiodinolide is a polyol macrolide isolated from the marine dinoflagellate Symbiodinium sp. in 2007. The C14-C24 fragment of symbiodinolide possessing the 17R/18R/21R absolute configuration, which was obtained as one of the degraded products of symbiodinolide, was synthesized stereoselectively from cis-2-butene-1,4-diol. The detailed comparison of the synthetic product with the degraded product in the spectroscopic data confirmed that the stereostructure of the C14-C24 fragment was 17R, 18R, and 21R.     

High pressure vapor–liquid equilibria for carbon dioxide + tetrahydrofuran mixtures

Vapor–liquid equilibria and saturated density for carbon dioxide + tetrahydrofuran mixtures at high pressures were measured by the analytical method at the temperatures 298.15 and 313.15 K. The experimental apparatus equipped with three Anton Paar DMA 512S vibrating tube density meters was previously developed for measuring vapor–liquid–liquid equilibrium at high pressures. The equilibrium composition and saturated density of each phase were determined by gas chromatograph and vibrating tube density meters, respectively. The bubble point pressure at the temperature 313.15 K was further measured by the synthetic method. The experimental data were correlated with Soave–Redlich–Kwong (SRK) equation of state and the pseudocubic equation of state.