Synthesis and structure of 1-zirconacyclopent-3-yne complexes without substituents adjacent to the triple bond

Five-membered metallacyclic alkynes that have no substituents adjacent to the triple bond have been synthesized, isolated, and structurally characterized. Zirconocene dichlorides, Cp'2ZrCl2 (Cp' = C5H5, C5H4-t-Bu), reacted with 1,4-dichlorobut-2-yne in the presence of magnesium to give 1-zirconacyclopent-3-yne compounds (5 (a) Cp' = C5H5, (b) Cp' = C5H4-t-Bu) that have a -CH2CCCH2- moiety in good yields. They are stable enough to be isolated in a pure form, despite the absence of substituents. 5a reacted with an equimolar amount of Cp2Zr(but-1-ene)(PMe3) to produce a bimetallic complex in which the zirconacyclopentyne coordinates to the other zirconocene moiety as an alkyne.     

Simultaneous determination of sulfamethoxazole and trimethoprim in human plasma by capillary zone electrophoresis

A capillary electrophoretic method for the simultaneous determination of sulfamethoxazole and trimethoprim in plasma was developed. Sulfamethoxazole and trimethoprim extracted from human plasma with ethyl acetate were analyzed at 20 kV and 25 degrees C using 15 mm phosphate buffer (pH 6.2) as the electrolyte. The detection was by UV at 220 nm. The run time was 8.0 min and the limit of quantification was 10.00 microg/mL for sulfamethoxazole and 2.00 microg/mL for trimethoprim. The recovery was >99% for both compounds. This method enabled the detection of sulfamethoxazole and trimethoprim in plasma of patients after oral ingestion of their combined formulation. The present simple and rapid method is applicable to drug monitoring in immunocompromised patients who are taking the combined formulation of these compounds for the treatment or prophylaxis of Pneumocystis carinii pneumonia.     

Officinatrione: an unusual (17S)-17,18-seco-lupane skeleton,and four novel lupane-type triterpenoids from the roots of Taraxacum officinale

Novel 5 lupane-type of triterpenois, i.e., 3β-acetoxy-18α,19α-epoxylupan-21β-ol (1), 18α,19α-epoxy-21β-hydroxylupan-3-one (2), lup-18-ene-3,21-dione (3), lupa-18,21-dien-3β-yl acetate (4), and (17S)-17,18-seco-lup-19(21)-ene-3,18,22-trione (5), named officinatrione, as well as 16 known compounds from the roots of Taraxacum officinale collected in Takatsuki city, Osaka, Japan. Of the above compounds, 5 was the first lupane-type triterpene, of which the D-ring was open to form a nine-membered ring. Compounds 2 and 5 exhibited moderate cytotoxic activities against L1210 cell line (IC₅₀ 10.5 and 10.1 μM).     

Ultrafast excited state dynamics of spirilloxanthin in solution and bound to core antenna complexes: Identification of the S∗ and T(1) states

Ultrafast excited state dynamics of spirilloxanthin in solution and bound to the light-harvesting core antenna complexes from Rhodospirillum rubrum S1 were investigated by means of femtosecond pump-probe spectroscopic measurements. The previously proposed S? state of spirilloxanthin was clearly observed both in solution and bound to the light-harvesting core antenna complexes, while the lowest triplet excited state appeared only with spirilloxanthin bound to the protein complexes. Ultrafast formation of triplet spirilloxanthin bound to the protein complexes was observed upon excitation of either spirilloxanthin or bacteriochlorophyll-a. The anomalous reaction of the ultrafast triplet formation is discussed in terms of ultrafast energy transfer between spirilloxanthin and bacteriochlorophyll-a.     

Preparation of Co–Al and Ni–Al layered double hydroxide thin films by a sol–gel process with hot water treatment

Using hot water treatment of sol–gel derived precursor gel films, Co–Al and Ni–Al layered double hydroxide (LDH) thin films were prepared. The precursor gel films of Al₂O₃–CoO or Al₂O₃–NiO were prepared from cobalt or nickel nitrates and aluminum tri-sec-butoxide using the sol–gel method. Then, the precursor gel films were immersed in a NaOH aqueous solution of 100 °C. Nanocrystallites of Co–Al and Ni–Al LDH were precipitated with the hot water treatment with NaOH solution. The largest amounts of nanocrystals were obtained with a solution of pH = 10 for Co–Al LDH, and with that of pH = 9 for Ni–Al LDH. X-ray diffraction measurements confirmed that this process formed CO₃ ²⁻ intercalated LDHs. Both Co–Al and Ni–Al LDH thin films were confirmed to work as electrodes for electrochemical devices by cyclic voltammogram measurements.     

Colloidal crystallization of thermo-sensitive gel spheres of poly (<Emphasis Type="Italic">N</Emphasis>-isopropyl acrylamide). Influence of gel size

Influence of the gel size on the morphology, phase diagram, and reflection spectroscopy of the colloidal crystals of thermo-sensitive gel spheres, poly (N-isopropylacrylamide) (pNIPAm), was discussed by adding the data of two gel samples of pNIPAm(400–5) and pNIPAm(600–5) of 412 nm (at 25 °C) and 220 nm (at 45 °C) and of 517 nm (at 20 °C) and 294 nm (at 45 °C), respectively. Colloidal single crystals formed, but not so large compared with the giant crystals of small pNIPAm gels reported previously. The suspensions even with ion-exchange resins were turbid and hard to observe the single crystals clearly with the naked eyes as gel size increased. The critical concentration of melting decreased sharply as the suspensions were deionized with coexistence of the mixtures of cation- and anion-exchange resins. The critical concentration increased as the gel size increased and/or dispersion temperature increased. Density of the gel spheres increased as their size increased. These results demonstrated that the colloidal crystallization takes place by the extended electrical double layers formed around the gel spheres in addition of the excluded volume effect of the gels. Contribution of the electrical double layers on the crystallization increased sharply as temperature increased and gel concentration decreased, respectively. The contribution also increased slightly as sphere size increased, when comparison was made at the same gel concentration in wt.%. The present work clarified that the colloidal interfaces, which are inevitable for the formation of the electrical double layers, are formed between the water phase and gel spheres, though the gel spheres contain a lot of water molecules at the inner sphere region.     

Light-driven phase transition in a cubic-phase-forming binary system composed of 4'-n-docosyloxy-3'-nitrobiphenyl-4-carboxylic acid and an azobenzene derivative

Binary mixtures were prepared from an azobenzene derivative and a liquid-crystal (LC) compound that exhibits smectic?C (SmC) and bicontinuous cubic (Cub(bi)) LC phases. Reversible switching between the two phases in response to UV-light irradiation was observed. This light-driven SmC-to-Cub(bi) transition is the first example showing the increased dimensionality of molecular ordering with isomerization of azobenzenes (see figure).     

强碱阴离子交换树脂及碱性洗脱剂的离子排阻/阴离子交换色谱法同时测定NH4+ ，NO2-和NO3-（英文）

Ion-exclusion/anion-exchange chromatography(IEC/AEC) on a combination of a strongly basic anion-exchange resin in the OH——form with basic eluent has been developed.The separation mechanism is based on the ion-exclusion/penetration effect for cations and the anion-exchange effect for anions to anion-exchange resin phase.This system is useful for simultaneous separation and determination of ammonium ion(NH+4),nitrite ion(NO-2),and nitrate ion(NO-3) in water samples.The resolution of analyte ions can be manipulated by changing the concentration of base in eluent on a polystyrene-divinylbenzene based strongly basic anion-exchange resin column.In this study,several separation columns,which consisted of different particle sizes,different functional groups and different anion-exchange capacities,were compared.As the results,the separation column with the smaller anion-exchange capacity(TSKgel Super IC-Anion) showed well-resolved separation of cations and anions.In the optimization of the basic eluent,lithium hydroxide(LiOH) was used as the eluent and the optimal concentration was concluded to be 2 mmol/L,considering the resolution of analyte ions and the whole retention times.In the optimal conditions,the relative standard deviations of the peak areas and the retention times of NH+4,NO-2,and NO-3 ranged 1.28%-3.57% and 0.54%-1.55%,respectively.The limits of detection at signal-to-noise of 3 were 4.10 μmol/L for NH+4,1.87 μmol/L for NO-2 and 2.83 μmol/L for NO-3.