Synthesis and Polymerization of (S)-4-Methyl-2-N,N-dimethylaminopentyl Methacrylate

(S)-4-Methyl-2-N,N-dimethylaminopentyl methacrylate (DMAPM) was synthesized from the reaction of N,N-dimethyl-L-leucinol with methacryl chloride, and its radical polymerization was investigated. It was found that DMAPM readily polymerized by α,α¹-azobisisobutyronitrile (AIBN) as an initiator to give poly-DMAPM. The copolymerization of DMAPM(M₁) with styrene(Mz) was also studied in various solvents with AIBN as an initiator at 60°C. From the result obtained in benzene, Q and e values of DMAPM were determined to be 0.64 and -0.04, respectively. Specific rotations of the copolymers of DMAPM with styrene were not proportional to the weight percent of the DMAPM unit incorporated, but the observed relation gave a downward curve. The copolymerizations DMAPM with α, β-disubstituted monomers such as maleic acid, maleimide, and N-phenylmaleimide were carried out in order to induce asymmetric center in the polymer chain. After hydrolysis of the copolymers obtained, the hydrolyzed polymers were found to be optically active, suggesting an induction of asymmetric center into the polymer chain.     

Synthesis and photophysical properties of 2,2′-binaphthalene-based receptor bearing trimethylsilyl groups to improve the solubility

Two trimethylsilyl groups were introduced at 5- and 5′-positions of 2,2′-binaphthalene to improve the solubility of 2,2′-binaphthalene-based receptors. The X-ray crystallographic analysis revealed the twisted structure of 2 in the solid state. The solubility of 2 was moderately improved by 3.1-fold comparing with mother skeleton 1. As a practical example of 2, receptor 8 bearing two aza-15-crown-5 moieties was prepared and the selective binding of 8 with Ba²⁺ can be observed by the formation of sandwich-like complex, which shows no prevention of binding ability of the receptor by introduction of the bulky substituents.     

A Selective Synthesis of 3,3-Di-C-(hydroxymethyl)-3-deoxy-furanorono-1,4-lactone in the Formose Reaction

Abstract

The formose reaction, by which a complex mixture of sugars and sugar alcohols (the so-called formose) are produced by the base-catalyzed condensation of formaldehyde, has received much attention in connection with the prebiotic synthesis of carbohydrates² and the microbial utilization of formose.^3–5 Formose, however, has not been useful yet, because of the complexity of this product mixture (Fig. 1a). Therefore, it seemed desirable to make the reaction more selective.     

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes utilizing silyl group-substituted titanium carbene complexes as bimetallic synthetic reagents

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes by the sequential reactions using silyl group-substituted titanium carbene complexes was studied. Dienylsilanes were obtained by the olefination of carbonyl compounds with γ-silylvinylcarbene complexes. Cyclopropanation of 1-alkenes with the vinylcarbene complexes produced (E)-(β-silylvinyl)cyclopropanes with high stereoselectivity. The reaction of β-(trialkylsilyl)carbene complexes with zinc alkoxides of homopropargyl alcohols produced 6-silyl-3,5-hexadien-1-ols with high regio- and stereoselectivity. The (E)-alkenylsilanes thus obtained were transformed into a range of unsaturated compounds by the palladium-catalyzed or copper(I)-promoted cross-coupling with organic halides with retention of configuration.     

Sputtering angle effects by Kr mixing in N+ ion beam on the lifetime of nitrided carbon stripper foils

Nitrided carbon stripper (NCS) foils with high nitrogen content were produced by ion beam sputtering of reactive nitrogen gas. Such foils seem to be very useful as strippers in high-intensity heavy ion accelerators. We have conducted comprehensive research, development, and production of such foils with high reproducibility. Krypton, a heavy noble gas, was mixed with the reaction nitrogen gas (IBSRN) in the ion beam sputtering process to produce stripper foils with short sputtering deposition time and long lifetimes in the high intensity ion beam irradiation. With the (N₂ + Kr) mixed gas ions we investigated the influence of different sputtering angles (α) on the lifetime of the NCS-foils in case of poly-graphite material. The lifetime measurement of these foils of 20 ± 5 μg/cm² was performed with a 3.2 MeV Ne⁺ ion beam as usual. The foils made at a sputtering angle of 15° showed a maximum of 11.0 and 7.5  C/cm² average charge density, respectively, which corresponded to about 275 and 187 times the lifetime of the best commercially available foils.     

Complex formation of light and heavy lanthanides with DGA and DOODA,and its application to mutual separation in DGA–DOODA extraction system

We studied the stepwise formation constants (β) of water-soluble diglycolamide (DGA) and dioxaoctanediamide (DOODA) for the mutual separation of Ln in a solvent extraction system. TODGA (N,N,N?,N?-tetraoctyl-diglycolamide) and DOODA(C8) (N,N,N?,N?-tetraoctyl-dioxaoctanediamide) exhibit opposite behaviors in extracting both light and heavy Ln through Ln-patterns. Metal complexes of two- and three-folding with water-soluble DOODA and DGA, respectively, were found, and each β value was calculated using distribution ratios. Taking β, their distribution ratio, D, and separation factor, SF, values into consideration, the suitable separation conditions (aqueous phase: 30 mM DOODA(C2) in 1 M HNO₃; organic phase: 0.1 M TODGA in n-dodecane) of multistage extraction (10?×?10 extraction using aqueous and organic phases, including one sample solution) were determined. In this study, La, Pr, and Nd were mainly present in the aqueous phase, whereas Sm–Dy existed in the organic phase. Although these two groups can be easily separated into two phases, the resolution, Rs, values provide for little mutual separation between La–Nd and Sm–Dy under the present conditions.

     

Hyperpolarized 13C Magnetic Resonance Imaging of Fumarate Metabolism by Parahydrogen-induced Polarization: A Proof-of-Concept in vivo Study

Hyperpolarized [1-¹³C]fumarate is a promising magnetic resonance imaging (MRI) biomarker for cellular necrosis, which plays an important role in various disease and cancerous pathological processes. To demonstrate the feasibility of MRI of [1-¹³C]fumarate metabolism using parahydrogen-induced polarization (PHIP), a low-cost alternative to dissolution dynamic nuclear polarization (dDNP), a cost-effective and high-yield synthetic pathway of hydrogenation precursor [1-¹³C]acetylenedicarboxylate (ADC) was developed. The trans-selectivity of the hydrogenation reaction of ADC using a ruthenium-based catalyst was elucidated employing density functional theory (DFT) simulations. A simple PHIP set-up was used to generate hyperpolarized [1-¹³C]fumarate at sufficient ¹³C polarization for ex vivo detection of hyperpolarized ¹³C malate metabolized from fumarate in murine liver tissue homogenates, and in vivo ¹³C MR spectroscopy and imaging in a murine model of acetaminophen-induced hepatitis.     

Recrystallization and formation of spheroidal gold particles in amorphous-like AlN–TiB<Subscript>2</Subscript>–TiSi<Subscript>2</Subscript> coatings after annealing and subsequent implantation

The recrystallization of the structure of an X-ray amorphous AlN–TiB₂–TiSi₂ coating containing short-range order regions with characteristic sizes of 0.8–1.0 nm has been performed using a negative gold ion (Au^–) beam and high-temperature annealing. Direct measurements using methods of high-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectral (EDXS) microanalysis have demonstrated that thermal annealing at a temperature of 1300°C in air results in the formation of nanoscale (10–15 nm) phases AlN, AlB₂, Al₃O₃, and TiO₂, whereas the ion implantation of negative ions Au^– leads to a fragmentation (decrease in the size) of nanograins to 2–5 nm with the formation of spheroidal gold nanocrystallites a few nanometers in size, as well as to the formation of an amorphous oxide film in the depth (near-surface layer) of the coating due to ballistic ion mixing and collision cascades.     

Efficient cross polarization with simultaneous adiabatic frequency sweep on the source and target channels

In this work, we propose a new and efficient heteronuclear cross polarization scheme, in which adiabatic frequency sweeps from far off-resonance toward on-resonance are applied simultaneously on both the source and target spins. This technique, which we call as Simultaneous ADIabatic Spin-locking Cross Polarization (SADIS CP), is capable of efficiently locking both the source and target spins with moderate power even in the presence of large spectral distribution and fast relaxation. It is shown that by keeping the time-dependent Hartmann-Hahn mismatch minimal throughout the mixing period, polarization transfer can be accelerated. Experiments are demonstrated in a powder sample of L-alanine.     

Separation of spin and orbital angular coherence momenta in the second-order coherence theory of vector electromagnetic fields

In analogy with the separation of the total optical angular momentum into a spin and an orbital part in electrodynamics, we introduce a new concept of spin and orbital angular coherence momenta into the general coherence theory of vector electromagnetic fields. The properties of the newly introduced spin and orbital angular coherence momenta are investigated through the decomposition of the total coherence angular momentum into the sum of these two components, and their separate conservations have been derived for what is believed to be the first time.