Studies of the Electronic Effects of Zinc Cluster Catalysts and Their Application to the Transesterification of β‐Keto Esters

The electronic effects of tetranuclear zinc cluster catalysts on transesterification were investigated by changing the carboxylate ligands in the clusters. High catalyst activity crucially depended on the balance between Lewis acidity and Brønsted basicity of the catalyst; this was consistent with the dual activation of both the electrophile and nucleophile by the cooperative zinc centers. In addition, tetranuclear zinc cluster catalysts achieved the transesterification of β‐keto esters with unprecedented levels of broad substrate generality, in which a newly developed pentafluoropropionate‐bridged zinc cluster and 4‐dimethylaminopyridine additive greatly improved the reactivity of sterically congested α‐ and α,α‐disubstituted β‐keto esters.     

Simplified method for determination of polycarbamate fungicide in water samples by liquid chromatography with tandem mass spectrometry following derivatization with dimethyl sulfate

A simple and sensitive analytical method for the determination of polycarbamate in water samples was developed. In this method, polycarbamate was cleaved under alkaline conditions and derivatized with dimethyl sulfate to methyl dimethyldithiocarbamate (DMDC-methyl) and dimethyl ethylenebisdithiocarbamate (EBDC-dimethyl). After the solid-phase extraction of the resulting methyl derivatives, they were measured by liquid chromatography with tandem mass spectrometry (LC-MS/MS), based on reversed-phase separation and MS/MS detection with positive atmospheric pressure chemical ionization. The absolute recoveries (mean+/-SD) all through the procedure from polycarbamate to DMDC-methyl and EBDC-dimethyl were 62.6+/-4.3 and 73.5+/-5.9%, respectively. The limits of detection and quantification of polycarbamate in the water samples were 0.061 and 0.20 microg/L in the form of DMDC-methyl, and 0.032 and 0.11 microg/L in the form of EBDC-dimethyl, respectively. The method was validated at levels of 0.25, 1.0, and 5.0 microg/L in the tap water and river water samples, and accuracy was achieved in the range of 94-109%. The proposed method can be applied to the determination of trace amounts of polycarbamate in environmental water samples.     

Matrix-assisted laser desorption/ionization mass spectrometry using a visible laser

Visible matrix-assisted laser desorption/ionization (VIS-MALDI) was performed using 2-amino-3-nitrophenol as matrix. The matrix is of near-neutral pH, and has an optical absorption band in the near-UV and visible region. A frequency-doubled Nd:YAG laser operated at 532 nm wavelength was used for matrix excitation and comparisons were made with a frequency-tripled Nd:YAG laser (355 nm). Visible and ultraviolet (UV)-MALDI produce similar mass spectra for peptides, polymers, and small proteins with comparable sensitivities. Due to the smaller optical absorption coefficient of the matrix at 532 nm wavelength, the optical penetration depth is larger, and the sample consumption per laser shot in VIS-MALDI is higher than that of UV-MALDI. Nevertheless, VIS-MALDI using 2-amino-3-nitrophenol as matrix may offer a complementary technique to the conventional UV-MALDI method in applications where deeper laser penetration is required.     

Efficient Generation of Microdroplets Using Tail Breakup Induced with Multi-Branch Channels

In recent years, research on the application of microdroplets in the fields of biotechnology and chemistry has made remarkable progress, but the technology for the stable generation of single-micrometer-scale microdroplets has not yet been established. In this paper, we developed an efficient and stable single-micrometer-scale droplet generation device based on the fragmentation of droplet tails, called “tail thread mode”, that appears under moderate flow conditions. This method can efficiently encapsulate microbeads that mimic cells and chemical products in passively generated single-micrometer-scale microdroplets. The device has a simple 2D structure; a T-junction is used for droplet generation; and in the downstream, multi-branch channels are designed for droplet deformation into the tail. Several 1–2 µm droplets were successfully produced by the tail’s fragmentation; this continuous splitting was induced by the branch channels. We examined a wide range of experimental conditions and found the optimal flow rate condition can be reduced to one-tenth compared to the conventional tip-streaming method. A mold was fabricated by simple soft lithography, and a polydimethylsiloxane (PDMS) device was fabricated using the mold. Based on the 15 patterns of experimental conditions and the results, the key factors for the generation of microdroplets in this device were examined. In the most efficient condition, 61.1% of the total droplets generated were smaller than 2 μm.     

Stable Subporphyrin meso-Aminyl Radicals without Resonance Stabilization by a Neighboring Heteroatom

Most aminyl radicals studied so far are resonance-stabilized by neighboring heteroatoms, and those without such stabilization are usually short-lived. We report herein that subporphyrin meso-2,4,6-trichlorophenylaminyl radicals and a bis(5-subporphyrinyl)aminyl radical are fairly stable under ambient conditions without such stabilization. The subporphyrin meso-2,4,6-trichlorophenylaminyl radical crystal structure displays a characteristically short C_meso−N bond and a perpendicular arrangement of the meso-arylamino group. The stabilities of these radicals have been ascribed to extensive spin delocalization over the subporphyrin π-electronic network as well as steric protection around the aminyl radical center.     

Enantioselective Borylative Dearomatization of Indoles through Copper(I) Catalysis

The enantioselective borylative dearomatization of a heteroaromatic compound has been achieved using a copper(I) catalyst and a diboron reagent. This reaction involves the regio‐ and enantioselective addition of active borylcopper(I) species to indole‐2‐carboxylates, followed by the diastereoselective protonation of the resulting copper(I) enolate to give the corresponding chiral indolines, which bear consecutive stereogenic centers.     

Liquid chromatographic determination of microcystins in water samples following pre-column excimer fluorescence derivatization with 4-(1-pyrene)butanoic acid hydrazide

A method to measure the concentrations of microcystins (MCs) in water samples has been developed by incorporating pre-column fluorescence derivatization and liquid chromatography (LC). A solid-phase extraction for pretreatment was used to extract the MCs in water samples. The MCs were derivatized with excimer-forming 4-(1-pyrene)butanoic acid hydrazide (PBH). The MCs could then be detected by fluorescence after separation with a pentafluorophenyl (PFP)-modified superficially porous (core shell) particle LC column. The derivatization reactions of MCs with PBH proceeded easily in the presence of 4,6-dimethoxy-1,3,5-triazin-2-yl-4-methylmorpholinium (DMT-MM) as a condensation reagent, and the resulting derivatives could be easily separated on the PFP column. The derivatives were selectively detected at excimer fluorescence wavelengths (440–540 nm). The instrument detection limit and the instrument quantification limit of the MCs standards were 0.4–1.2 μg L⁻¹ and 1.4–3.9 μg L⁻¹, respectively. The method was validated at 0.1 and 1.0 μg L⁻¹ levels in tap and pond water samples, and the recovery of MCs was between 67 and 101% with a relative standard deviation of 11%. The proposed method can be used to quantify trace amounts of MCs in water samples.     

Apical functionalization of chiral heterohelicenes

We describe a synthetic protocol to selectively functionalize chiral bridged triarylamines at the apical position using regioselective copper-catalyzed amination reaction. This protocol allows the coupling of diphenylamines with a sterically hindered but electronically activated aryl-Br bond in the presence of a sterically unhindered but electronically unactivated aryl-Br bond. The unactivated aryl-Br bond was utilized further to synthesize a chiral heterohelicene homodimer using Stille coupling.     

A single-cell drug efflux assay in bacteria by using a directly accessible femtoliter droplet array

Active efflux of drugs, such as antibiotics, from a cell is one of the major mechanisms that cause multi-drug resistance in bacteria. Here we report a method to assess drug efflux activity in individual Escherichia coli cells enclosed and isolated in a directly accessible femtoliter droplet array with a fluorogenic compound. The inhibitory effect of a chemical compound on an exogenously expressed efflux pump system from pathogenic bacteria was easily detected at the single-cell level. We also present a proof-of-principle experiment to screen for the gene encoding a drug efflux pump by collecting individual droplets containing single cells in which the drug efflux activity was restored after introduction of the exogenous gene from pathogenic bacteria. Our approach will be a useful tool to screen novel pump inhibitors and efflux pump genes, and to overcome infectious diseases caused by multi-drug-resistant bacteria.