Efficient synthesis of N-acyl-α-amino acids via polymer incarcerated palladium-catalyzed amidocarbonylation

A novel polymer incarcerated Pd catalyst (PI Pd 7c) was synthesized from amide-containing polymer 6b, and this catalyst was shown to be effective in amidocarbonylation, which is a versatile one-pot method for the preparation of N-acyl-α-amino acids. The reactions proceeded smoothly with a wide variety of substrates, and no leaching of the Pd metal to the reaction mixture was detected.     

Fragmentation study of peptides using Fourier transform ion cyclotron resonance with infrared multiphoton dissociation: experiment and simulation

In this study, the fragmentation of gas-phase protonated Angiotensin II is investigated using electrospray ionization (ESI), Fourier-transform ion cyclotron resonance (FT-ICR), and mass spectrometry (MS) with a laser cleavage infrared multiphoton dissociation (IRMPD) technique. The experimental results show that the spectra peaks for the photoproducts are y2/b6- and y7-type ions, corresponding to the cleavage of His-Pro and Asp-Arg in the parent amino acid sequence. The fragmentation of the peptide under collision-free vacuum conditions is modeled using molecular dynamics simulations (MD). The binding energy for the peptide bonds (C'-N bond) of Angiotensin II is estimated from ab initio calculations. The calculations are directed at predicting experimental measurements of the product ions from the photodissociation of the peptide. The product distributions simulated by the MD dissociation trajectories include predominantly y7/b1 and y2/b6 pair ions.     

Aryl-aryl coupling reaction using a novel and highly active palladium reagent prepared from Pd(OAc)2, 1,3-bis[diphenylphosphino]propane (DPPP), and Bu3P

A palladium-assisted coupling reaction of aryl triflate with arene was investigated, and a novel Pd reagent prepared from equimolar Pd(OAc)2, 1,3-Bis[diphenylphosphino]propane (DPPP), and Bu3P was developed. This method is useful for intramolecular biaryl coupling reactions, not only between aryl triflate and arene (triflate-amide), but also between aryl halide and arene (halo-amide).     

Effects of the acid chain length and copolymer crosslinking on the acylation of N-hydroxysuccinimide copolymers with carbobenzoxyoligo-ϵ-aminocaproic acids

N-Hydroxysuccinimide-type soluble copolymer with styrene and three similar divinylbenzene (3–4 mole-%) crosslinked copolymers with styrene, N-vinylpyrrolidone, and N,N-dimethylacrylamide were prepared from their precursor copolymers of N-acetoxymaleimide. Acylation of these N-hydroxyl polymers with carbobenzoxyoligo-?-aminocaproic acids was conducted in dimethylformamide at room temperature by using dicyclohexylcarbodiimide as condensing agent. The soluble styrene copolymer was acylated in good conversions (76–89%) in every case (n = 1–3), whereas the acylation of the crosslinked copolymers decreased slightly from n = 1 to n = 2, and dropped suddenly to only small conversions (4.7–7.4%) with n = 3, showing a marked inhibitory effect of crosslinking when the acids became longer. The effect of the microenvironment of the polymer did not appear significant. All the acyl polymers, including the precursor polymers, yielded the corresponding cyclohexylamides when treated with cyclohexylamine.     

Synthetic studies of vitamin D analogues. IX. Synthesis and differentiation-inducing activity of 1 alpha,25-dihydroxy-23-oxa-, thia-, and azavitamin D3.

Three vitamin D3 analogues, 1 alpha,25-dihydroxy-23-oxavitamin D3 (3), 1 alpha,25-dihydroxy-23-thiavitamin D3 (4) and 1 alpha,25-dihydroxy-23-azavitamin D3 (5) were synthesized. In the differentiation-inducing activity of human myeloid leukemia cells into macrophages in vitro, the 23-aza analogue (5) showed the least activity, while no remarkable differences were observed between the 23-oxa analogue (3) and the 23-thia analogue (4), which were less active than 1 alpha,25-dihydroxyvitamin D3 (1).     

Incorporating tritiated water into a 14C-sampling system for quantitative estimation of 14C activity in airborne effluent

The effects of incorporating tritiated water into a ¹⁴C-sampling system in sample preparation and ¹⁴C activity measurement by liquid scintillation counting were investigated. Experiments derived the limit of water content in the prepared sample, and also demonstrated that ¹⁴C activity can be determined without any interference from ³H contamination for a clear-sample solution. The results enabled us to estimate the permissible relative humidity of air required for accomplishing sample preparation and ¹⁴C activity measurement. These showed that for sampling of air with less than the permissible relative humidity, total ¹⁴C activity in airborne effluent can be evaluated accurately without dehumidification of air.The authors would like to thank T. Kozawa, K. Isaka and Y. Adachi of Inspection Development Company Ltd., Y. Hiyama of Zuihou Sangyou Company Ltd., and T. Mizutani, H. Watanabe, M. Takeishi and K. Shinohara of Japan Nuclear Cycle Development Institute for their valuable assistance.     

Mössbauer study of new vanadate glass with large charge-discharge capacity

Charge-discharge capacity and cyclicity of lithium ion battery (LIB) was evaluated in which 15Li₂O·10Fe₂O₃·xSnO₂·5P₂O₅·(70–x)V₂O₅ glass (x?=?0 and 20 in mol%, abbreviated as xLFSPV) was used as a cathode. A local structure of xLFSPV glass before and after charging was investigated by ⁵⁷Fe- and ¹¹⁹Sn-Mössbauer spectroscopies. ⁵⁷Fe-Mössbauer spectrum of xLFSPV glass with ‘x’ of 20 was composed of a doublet with isomer shift (δ) of 0.35_±0.02 mm s^???1 and quadrupole splitting (Δ) of 0.88_±0.03 mm s^???1 due to distorted Fe^IIIO₄ tetrahedra. ¹¹⁹Sn-Mössbauer spectrum of this glass consisted of a doublet with δ of 0.08_±0.01 and Δ of 0.52_±0.01 mms^???1 due to distorted Sn^VIO₆ octahedra. After discharging the battery from 4.5 to 1.0 V, larger δ of 0.40_±0.03 mm s^???1 and Δ of 0.94_±0.04 mm s^???1 were obtained, indicating that both iconicity of Fe-O bonds and local distortion of Fe^IIIO₄ tetrahedra were increased. On the contrary, identical δ of 0.09_±0.01 mm s^???1 and Δ of 0.50_±0.01 mm s^???1 were observed in the ¹¹⁹Sn-Mössbauer spectrum of 20LFSPV glass after the discharge, indicating that chemical environment of Sn^IVO₆ octahedra was not affected after the discharge. Charge-discharge curve of LIB containing 20LFSPV glass as a cathode active material recorded under the current density of 8.3 mA g^???1 (0.011 mA cm^???2) between 1.0 and 4.5 V showed a large initial charge capacity of 431.1 mAh g^???1 and discharge capacity of 382.3 mAh g^???1, respectively. These results indicate that 20LFSPV glass could be a new cathode active material for LIB.     

Mapping analyses of Fe-diffused mc-Si using M?ssbauer microscope and photoluminescence

Twenty CK chondrites collected in the Antarctica Continent were characterized by inductively-coupled plasma mass spectrometry (ICP-MS), prompt gamma ray analysis (PGA), instrumental neutron activation analysis (INAA), X-ray diffractometry (XRD) and ⁵⁷Fe-M?ssbauer spectroscopy. As a result of elemental analysis, it was revealed that 18.2~26.4 mass% of iron was included in the each chondrite. M?ssbauer spectrum of LEW86258, classified as a typical CK chondrite, was found to be composed of two paramagnetic doublets and two magnetic sextets. M?ssbauer spectra were assigned to the absorption due to forsterite (Mg_1.36Fe_0.64SiO₄) and magnetite (Fe₃O₄), as also confirmed by XRD. XRD study of LAP03834, reclassified from CK to R chondrite, revealed the presence of crystalline phase due to forsterite. These results indicate that LAP03834 and related chondrites, i.e., MET01149, LAP03923 and MAC02453, should be reclassified as R or LL chondrite.     

Mechanically strengthened new Hagi porcelain developed by controlling the chemical environment of iron

In order to enhance the mechanical strength of Hagi Porcelain (Hagiyaki), one of the oldest and famous potteries in Japan, new preparation condition was examined. Tempered Hagi porcelain, denominated as ‘Hagi Porcelain B’, was prepared with the Porcelain clay originating from Daido district, Yamaguchi Prefecture, Japan. Structural change of ‘Hagi Porcelain B’ was investigated by means of ⁵⁷Fe-Mössbauer spectroscopy, X-ray diffractometry (XRD) and three-point bending test. Mechanical strength of the ‘original Hagi Porcelain B’ was estimated to be 43.1 MPa by means of the three-point bending test, while much larger value of 104.5 MPa could be achieved when tempered by a chemical modification. Mössbauer spectrum of the ‘original Hagi porcelain B’ was composed of a paramagnetic doublet and a magnetic sextet due to Fe(III) of γ-Fe₂O₃(maghemite), while only one paramagnetic doublet due to to octahedral Fe(II)O₆ was observed for the ‘tempered Hagi Porcelain B’ with isomer shift and quadrupole splitting values of 1.13 and 2.15 mm s^?1, respectively. It is considered that the absence of magnetic phase causes an increase of the mechanical strength because the maghemite phase has a defect spinel structure. These results indicate that mechanical strength of the ‘Hagi porcelain B’ could be enhanced by controlling the sintering condition.     

Power of isotopic fine structure for unambiguous determination of metabolite elemental compositions: In silico evaluation and metabolomic application

In mass spectrometry (MS)-based metabolomics studies, reference-free identification of metabolites is still a challenging issue. Previously, we demonstrated that the elemental composition (EC) of metabolites could be unambiguously determined using isotopic fine structure, observed by ultrahigh resolution MS, which provided the relative isotopic abundance (RIA) of ¹³C, ¹⁵N, ¹⁸O, and ³⁴S. Herein, we evaluated the efficacy of the RIA for determining ECs based on the MS peaks of 20,258 known metabolites. The metabolites were simulated with a ≤25% error in the isotopic peak area to investigate how the error size effect affected the rate of unambiguous determination of the ECs. The simulation indicated that, in combination with reported constraint rules, the RIA led to unambiguous determination of the ECs for more than 90% of the tested metabolites. It was noteworthy that, in positive ion mode, the process could distinguish alkali metal-adduct ions ([M + Na]⁺ and [M + K]⁺). However, a significant degradation of the EC determination performance was observed when the method was applied to real metabolomic data (mouse liver extracts analyzed by infusion ESI), because of the influence of noise and bias on the RIA. To achieve ideal performance, as indicated in the simulation, we developed an additional method to compensate for bias on the measured ion intensities. The method improved the performance of the calculation, permitting determination of ECs for 72% of the observed peaks. The proposed method is considered a useful starting point for high-throughput identification of metabolites in metabolomic research.