Surface functionalization of ordered mesoporous carbons--a comparative study

Hexagonally structured mesoporous carbons C15 and CMK-5 and cubically structured carbon C48 were synthesized using ordered silica SBA-15 and MCM-48 as templates and carbon precursors of different structures. The surfaces of these ordered carbons were chemically functionalized by employing an approach, in which the selected diazonium compounds were in situ generated and reacted with the carbon frameworks of the mesoporous carbons. The aromatic organic molecules containing chlorine, ester, and alkyl groups were covalently attached to the surface of these ordered mesoporous carbons. The presence of functional groups on the modified carbons was confirmed with Fourier transform infrared spectroscopy, thermogravimetric analysis, and nitrogen adsorption. The BET-specific surface area and the pore width of ordered carbons were significantly reduced, whereas the primary structure of these ordered carbons and their unit cells were intact. Basically, the density of grafted functional groups is related to the specific surface area of the sample, particularly the surface area of mesopores. The surface functionalization reaction takes place only on the external surface of carbon C15, while it occurs on both of the internal and external surface of CMK-5 carbon with the nanopipe structure. The presence of the micropores in CMK-5 carbon should be responsible for its lower grafting density because the small micropores are inaccessible in the reaction. It was also proposed that the preferred adsorption/reaction in C48 may be related to the observed unsymmetrical degradation of the XRD patterns for the functionalized C48 samples. The chemical modification process considerably reduced the primary mesopores in these ordered carbons by approximately 1-1.5 nm, affording carbons with micropores in the cases of C15 and C48, and mixed micropores and small mesopores in the case of CMK-5. A grafting density of approximately 0.9-1.5 micromol/m(2) was achieved under current research.     

基于双波测量的催化动力学极诸法测定钒

在 ｐＨ ４．５ ＨＡｃ－ＮａＡｃ缓冲溶液中，钍试剂分别于－ ０．３６ Ｖ、－ ０．６０ Ｖ产生两个灵敏的极谱波。基于钒对溴酸钾氧化钍试剂的催化作用，建立了双极谱波测量的催化动力学极谱法。钒浓度在０．７～１５μｇ／Ｌ与△Ｉ（△Ｉ１＋ Ｉ２）呈线性关系，检测限为０．５μｇ／Ｌ。研究了极谱波性质及电极反应机理。本法简便、灵敏、准确，已用于直接测定水中痕量钒。     

硅酸及其盐的研究 ⅩⅩⅠ.三甲基硅烷化-气相色谱法测定单硅酸的离解常数

单硅酸的离解常数是表征其基本性质的重要数据,前人已有不少工作,但由于测定的方法和实验条件不同,所得数据很不一致。     

DNA-modified electrodes; part 4: optimization of covalent immobilization of DNA on self-assembled monolayers

The covalent immobilization of DNA onto self-assembled monolayer (SAM) modified gold electrodes (SAM/Au) was studied by X-ray photoelectron spectrometry and electrochemical method so as to optimize its covalent immobilization on SAMs. Three types of SAMs with hydroxyl, amino, and carboxyl terminal groups, respectively, were examined. Results obtained by both X-ray photoelectron spectrometry and cyclic voltammetry show that the largest covalent immobilization amount of dsDNA could be gained on hydroxyl-terminated SAM/Au. The ratio of amount of dsDNA immobilized on hydroxyl-terminated SAMs to that on carboxyl-terminated SAMs and to that on amino-terminated SAMs is (3-3.5): (1-1.5): 1. The dsDNA immobilized covalently on hydroxyl-terminated SAMs accounts for 82.8-87.6% of its total surface amount (including small amount of dsDNA adsorbed). So the hydroxyl-terminated SAM is a good substrate for the covalent immobilization of dsDNA on gold surfaces.     

Synthesis and Magnetism of 2-Hydroxy-1,3-propylene-bis(oxamato)-bridged Co~ⅡCu~ⅡCo~Ⅱ Complexes

ＳｙｎｔｈｅｓｉｓａｎｄＭａｇｎｅｔｉｓｍｏｆ２┐Ｈｙｄｒｏｘｙ┐１，３┐ｐｒｏｐｙｌｅｎｅ┐ｂｉｓ（ｏｘａｍａｔｏ）┐ｂｒｉｄｇｅｄＣｏⅡＣｕⅡＣｏⅡＣｏｍｐｌｅｘｅｓＭＩＡＯＭｉｎｇ－ｍｉｎｇ，ＣＨＥＮＧＰｅｎｇ，ＬＩＡＯＤａｉ－ｚｈｅｎｇＪＩＡ...     

取代基效应与乙烯-α-烯烃共聚物的序列结构——5.乙烯-乙烯醇共聚物

本文应用取代基效应(SCS)方法研究了乙烯-乙烯醇(EVA)共聚物,得到了羟基(-OH)在两种不同溶剂中的SCS参数:在苯酚+重水(80/20W/W)中参数为S_1=42.77±0.08ppm,S_2=7.155±0.06ppm,S_3(s)=-4.08±0.02ppm,S_3(t)=-3.09±0.02ppm,S_4=0.48±0.03ppm,S_5=0.26±0.05ppm,在以邻二氯苯为溶剂时参数为S_1=44.97±0.61ppm,S_2=7.40±0.00ppm,S_3(s)=-4.51±0.17ppm,S_3(t)=-3.13±0.00ppm,S_4=0.63±0.04ppm,S_5=0.36±0.00ppm,同时利用所得到的SCS参数对该共聚物的~(13)C NMR谱进行了归属。     

石墨炉原子吸收法测定生物样品中镉的几种基体改进剂的比较

本文比较了磷酸二氢铵、氟化铵、硫酸铵、氯化钯、氯铂酸以及氯铂酸与多种有机酸的混合试剂在测定ＧＢＷ猪肝标准物质中镉时基体改进效果，其中，氯铂酸的基体改进能力最强，猪肝标准物质的回收率在９０％     

人工神经元网络辅助丙烷氨氧化催化剂设计

报道了利用人工神经元网络辅助丙烷氨氧化制丙烯腈催化剂设计的研究进展结果．通过筛选得到了可以拟合该反应体系的神经元网络模型，从而使丙烷转化率和丙烯腈选择性可以表示为催化剂组成的函数，利用培训后的神经元网络模型所得到的权值文件，结合作者自编的优化程序，该网络可用于预测最优的催化剂组成．实验得到丙烯腈收率和选择性可分别达到４３．０％和５６．２４％．     

Stabilization and characterization of colloidal gas aphron dispersions

Colloidal gas aphrons (CGAs) are finding increasing application in water processing, bioseparation, bubble-entrained floc flotation, separation of oil from sand, etc. This article proposes an effective method of encapsulation to stabilize the CGA bubbles with silicic sol solution for their characterization. The stabilized CGA bubbles can keep shapes and sizes for at least 12 h; even the bubbles smaller than 25 mum can also be stabilized and exist for very long times. Effects of concentration and pH of silicic sol solution on CGA stabilization were studied. The optimal ranges of concentration and pH of silicic sol solution are 0.15-0.25 mol/dm(3) and 7-10, respectively. The bubble distortion behavior in disturbance and size distribution of CGAs were examined by using the stabilization method and photographic techniques.