Structure and Magnetic Properties of a Novel Two‐Dimensional Complex from 1, 3, 5‐Benzenetricarboxylate and Neodymium(III) — {[Nd(1, 3, 5‐benzenetricarboxylate)(H2O)4] · H2O}n

A unique neodymium(III) complex, {[Nd(BTC)(H₂O)₄] · H₂O}_n (BTC = 1, 3, 5‐benzenetricarboxylate), was obtained from the reaction between Nd(ClO₄)₃ · xH₂O and Na₃BTC. Coordination bonds, hydrogen bonds, and π‐π stacking form a supramolecular structure with a novel, two‐dimensional framework. The temperature‐dependent magnetic susceptibilities were analyzed by the Curie‐Weiss law; the following values were found C = 1.32, θ = —18.3 K, respectively.     

Thermal Decomposition Kinetics of the Zn(II) Complex with Norfloxacin in Static Air Atmosphere

The thermal decomposition of Zn[NFA]₂5H₂O (NFA=C₁₆H₁₈FN₃O₃, norfloxacin) and its kinetics were studied under non-isothermal conditions in air by TG-DTG and DTA methods. The intermediate and residue for each decomposition were identified from the TG curve. The non-isothermal kinetic data were analyzed by means of the Achar method and the Madhusudanan-Krishnan-Ninan (MKN) method. The possible reaction mechanisms were investigated by comparing the kinetic parameters. The kinetic equation for the second stage can be expressed as d/dt=Aexp(–E/RT)(1–).This revised version was published online in November 2005 with corrections to the Cover Date.     

New approaches to enantioselective fluorination: Cinchona alkaloids combinations and chiral ligands/metal complexes

The selective construction of carbon-fluorine bonds is of great interest to medicinal chemists because the replacement of a hydrogen or an oxygen atom with a fluorine atom in biologically active molecules can confer the molecules with improved physicochemical properties and biological activities. Since the first discovery of enantioselective fluorination using N-fluorocamphorsultam, our synthetic interest had been focused on the development of chiral N-fluorosulfonamide derivatives capable of enantioselective fluorination. However, these initial efforts revealed several limitations in both chemical yields and enantioselectivities of the fluorinated products. We present here the background of our personal story of the enantioselective fluorination reaction and some successful applications of the methods to the design and synthesis of biologically active products. Two novel approaches using cinchona alkaloid/Selectfluor^® combinations and chiral ligands/metal complexes have been pursued, respectively. In addition, the recent advances in this area by other groups are also described briefly.     

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

A sensitive amperometric glucose biosensor based on platinum nanoparticles (PtNPs) combined aligned carbon nanotubes (ACNTs) electrode was investigated. PtNPs which can enhance the electrocatalytic activity of the electrode for electrooxidating hydrogen peroxide by enzymatic reaction were electrocrystallized on 4‐aminobenzene monolayer‐grafted ACNTs electrode by potential‐step method. These PtNPs combined ACNTs' (PtNPs/ACNTs) surfaces were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The highly dispersed PtNPs on ACNTs can be obtained. The enzyme electrode exhibits excellent response performance to glucose with linear range from 1×10^?5–7×10^?3 mol L^?1 and fast response time within 5 s. Furthermore, this glucose biosensor also has good reproducibility. It is demonstrated that the PtNPs/ACNTs electrode with high electrocatalytic activity is a suitable basic electrode for preparing enzyme electrodes.     

Adsorption characteristics of radionuclides on nickel hexacyanoferrate(ii)

The composition of nickel hexacyanoferrate(II) complexes depends on the ratios of sodium hexacyanoferrate(II) and nickel nitrate solutions mixed. The adsorption behavior of nickel hexacyanoferrate(II) is described; acid treatment of Ni₂Fe(CN)₆ accelerates the adsorption rate of cesium, but does not increase the adsorption capacity. The Ni—Cs exchange ratios of Ni₂Fe(CN)₆ are discussed. In concentrated salt solutions, the distribution coefficients of ⁵⁹Fe, ⁶⁰Co, ⁶⁵Zn. ¹³⁷Cs, ⁹⁵Zr and ¹⁴⁴Ce are determined together with those of ⁸⁵Sr and ¹⁰⁶Ru. A simple determination of ¹³⁷Cs in sea water containing ⁵⁹Fe, ⁶⁰Co, ⁶⁵Zn, ⁹⁵Zr, ¹⁴⁴Ce, ⁸⁵Sr and ¹⁰⁶Ru is described.     

13C nuclear magnetic resonance studies of cellulose acetate

¹³C-NMR spectra of ring carbons and O-acetyl carbonyl carbons of cellulose acetate (CA) in dimethyl sulfoxide-d₆ were analyzed. The CA samples with the degree of substitution (DS) ranging from 0.84 and 1.91 were prepared by homogeneous acetylation of cellulose with acetic anhydride in a 10% LiCl/dimethyl acetamide solvent. It was found that the use of these low DS samples permitted easier assignments not only of the ring carbon but also of the O-acetyl carbonyl carbon signals. The assignments were confirmed by comparing with the ¹H-NMR spectra of the samples obtained by complete acetylation of the corresponding CA samples with acetyl-d₃ chloride. Two methods for determining the distribution of O-acetyl groups of CA, i.e., the relative DS at the three different types of hydroxyl groups, were developed. One is based on the measurements of the relative intensities of the signals for the ring carbons and the other is based on the measurements of the relative intensities of the signals for the O-acetyl carbonyl carbons.     

三元无规芳—脂族聚酯酰胺的热致液晶行为

采用低湿溶液缩聚的方法合成了对苯二甲酰氯，二甲基联苯胺和己二醇为单体的芳酯族液晶聚酯酰胺。用ＤＳＣ，Ｘ光衍射分析和偏光显微镜等手段研究了该系列聚酯酰胺的热致液晶行为，确认了二甲基联苯胺单体用量在２０％（ｍｏｌ）的情况下，所得聚酯酰胺仍为向列型液晶聚合物。由于聚酯酰胺分子间聚酰胺链段之间的氢键作用，随着二甲基联苯胺用量增加至６０ｍｏｌ％时，所得的聚酯酰胺己无液晶转变温度，其液晶区间即从熔融温度直至分     

A study of methylation of inorganic tin by iodomethane in an aquatic environment with 13C carbon isotope tracer technique

The methylation of tin(II) [Sn(II)] by iodomethane (CH₃I) under environmental conditions has been further demonstrated by a ¹³C carbon isotope tracer method. Methylation products are mainly monomethyltin, and very small amounts of dimethyltin. The reaction of Sn(II) and CH₃I was investigated at pH 2, 4, 6, 8, 10 and salinity (S) 8, 15, 22, 28, 35%; it has been found the reaction was affected by pH and salinity, the tin methylation activity being highest at about pH 6 and S = 28% . The methylation reaction is first-order for both CH₃I and Sn(II), and the rate equation has been obtained as follows: .     

Photoactivation of pheophorbide a induces a mitochondrial-mediated apoptosis in Jurkat leukaemia cells

The mechanism of cell death by pheophorbide a (Pba) which has been established to be a potential photosensitizer was examined in experimental photodynamic therapy (PDT) on Jurkat cells, a human lymphoid tumor cell line. In 30-60 min after irradiation, Pba treated cells exhibited apoptotic features including membrane blebbing and DNA fragmentation. Pba/PDT caused a rapid release of cytochrome c from mitochondria into the cytosol. Sequentially, activation of caspase-3 and the cleavage of poly ADP-ribose polymerase (PARP) were followed. Meanwhile, no evidence of activation of caspase-8 was indicated in the cells. In experiments with caspase inhibitors, it was found that caspase-3 alone was sufficient initiator for the Pba-induced apoptosis of the cells. Pba specific emission spectra were confirmed in the mitochondrial fraction and the light irradiation caused a rapid change in its membrane potential. Thus, mitochondria were entailed as the crucial targets for Pba as well as a responsible component for the cytochrome c release to initiate apoptotic pathways. Taken together, it was concluded that the mode of Jurkat cell death by Pba/PDT is an apoptosis, which is initiated by mitochondrial cytochrome c release and caspase-3-pathways.     

Knoevenagel condensation catalysed by poly（vinyl chloride） supported tetraethylenepentamine （PVC-TEPA）

Poly(vinyl chloride) supported tetraethylenepentamine (PVC-TEPA) has been found to be an efficient catalyst for the Knoevenagel condensation. A wide range of aromatic aldehydes easily undergo condensations with ethyl cyanoacetate and malononitrile in the commercial 95% ethanol in refluxing using PVC-TEPA as catalyst to afford the desired products of good purity in moderate to excellent yields. A recycling study confirmed that the catalyst could be reused, the yield of the desired condensation product were not reduced. The merits of this protocol are environmentally benign, simple operation, convenient work-up and good yields. Furthermore, the catalyst can easily be recovered and reused at five times with comparable yields.