Short-length microstructured phosphate glass fiber lasers with large mode areas

We report fabrication and testing of the first phosphate glass microstructured fiber lasers with large Er-Yb-codoped cores. For an 11-cm-long cladding-pumped fiber laser, more than 3 W of continuous wave output power is demonstrated, and near single-mode beam quality is obtained for an active core area larger than 400 microm2.     

The magnetic entropy change in the double perovskite La2NiMnO6 with strong spin–phonon coupling

The magnetocaloric effect and the critical behavior of La₂NiMnO₆ are investigated by measurement of the magnetization around $T_C$. The magnetic entropy change $\left|\Delta S\right|$ of La₂NiMnO₆ for a field change of 0–45 kOe near the Curie temperature is about 5% of the theoretical expectation. The critical behavior of the La₂NiMnO₆ deviates from the mean field theory. These abnormal phenomena are understood in the context of the strong spin–phonon coupling in La₂NiMnO₆. It is suggested that a method of modulating this coupling would enhance the magnetic entropy change greatly, which makes the La₂NiMnO₆ a promising candidate for room-temperature magnetic refrigeration.     

液氮温区下应变式位移传感系统测量性能的研究

文中研究了一种应变式位移传感系统在室温和液氮温度下的静态传输特性。实验结果表明,该系统在液氮温区下具有良好的输出特性,系统非线性度低于1%,滞环率低于5%,其灵敏系数与温度相关,293K和77K温度下的灵敏系数分别为-0.3654mV/V/mm和-0.3886mV/V/mm。实验结果为该位移传感系统在低温环境中的应用提供了一定基础。     

有机电光晶体4-(4-二甲基氨基苯乙烯基)甲基吡啶对甲基苯磺酸盐的太赫兹光谱研究

采用色散校正的密度泛函理论(dispersion-corrected density functional theory,DFT-D2)对有机电光晶体4-(4-二甲基氨基苯乙烯基)甲基吡啶对甲基苯磺酸盐(4-N,N-dimethylamino-4′-N′-methyl-stilbazolium tosylate,DAST)进行结构优化和太赫兹光谱计算,通过逐步提高精度进行几何优化的方法寻找DAST收敛的基态稳定结构,获得与DAST初始结构相一致的基态稳定结构.在此结构的基础上,在0—4 THz范围的太赫兹计算光谱与实验测量结果一致,说明采用DFT-D2进行优化的合理性.重要的是,首次通过计算的太赫兹光谱对DAST在0—4 THz范围的太赫兹吸收峰的振动模式进行了详细归属.结果表明:1.12 THz处的振动是DAST阴阳离子的光学声子模式,1.46 THz和1.54 THz两处的振动主要与磺酸盐有关,而2.63 THz和3.16 THz两处的振动则分别源于阳离子的扭转振动和阴离子的转动.该结果不仅很好地说明了阴阳离子分别在太赫兹响应中的贡献,而且为今后通过取代阴阳离子基团获取具有更高二阶非线性效应的DAST衍生物的新合成提供了重要的参考和指导.本文结果说明密度泛函理论在太赫兹光子学上的重要应用,对探究有机电光晶体的太赫兹响应物理原理、性能控制等具有重要的指导价值.     

Influence of laser power density on damage of comb by photodynamic therapy—simulation and validation of mathematical models

Photodynamic therapy （PDT） has poor therapeutic outcomes for the treatment of port-wine stain （PWS） lesions with long drug-light intervals （DLIs）. This letter investigates the possibility of improving the treatment efficacy through increasing the laser power density using a computer simulation and a cock comb model. The computational model includes a Monte Carlo simulation for the laser distribution and a calculation of the singlet oxygen concentrations （102）. Both simulation and experimental results show that increasing the power density from i00 to 140 mW/cm^2 not only improves the PDT efficacy, but also results in the unwanted skin damage.     

抽运光与信号光的光强重叠因子和掺铒玻璃波导放大器的增益特性

在掺铒玻璃波导放大器（EDWA）的三能级速率-传输方程中,考虑两次离子交换工艺中波导掩模窗口宽度w不同所导致的抽运光、信号光模场与光强分布的不同,讨论不同w对EDWA增益特性的影响,得到光强分布的数值解.引入描述波导中抽运光和信号光的归一化光强重叠因子,对EDWA的传统近似解提出修正,得到了修正解,使其更加接近光强分布的数值解.模拟结果表明,在条波导长度为4 cm、抽运光波长为980 nm、功率为80 mW、信号光波长为1534 nm、功率为-10 dBm条件下,不同w所导致EDWA的增益差别可达297 dB.修正解的结果比传统近似解更加接近光强分布的数值解.修正解对于EDWA的理论研究、器件设计具有指导作用. 关键词： 集成光学 掺铒玻璃波导放大器 重叠积分因子 增益     

基于天文观测的相机标定及姿态测量技术研究

为利用相机进行天文观测以实现高精度的相机姿态测量,必须先对相机参数进行精确标定。针对传统相机标定方法工作距离有限的问题,提出了以恒星为控制点的相机标定方法,根据球面天文学方法计算观测时刻控制点的世界坐标,利用摄像测量原理建立了恒星观测模型,求解相机的内外参数并分析了误差因素。实验结果表明,该标定方法在不依赖于精密、复杂的外部设备情况下可达到较高精度,并具有较强的抗噪声能力。将标定结果用于天文观测并求解相机姿态,航向角和俯仰角的解算重复性优于10″,能够满足高精度姿态测量的需求。该方法可进一步推广应用于星敏感器的标定。     

Orientation dependence of the electrocaloric effect of ferroelectric bilayer thin films

An analytical thermodynamic theory is applied to investigate the electrocaloric effect of ferroelectric BaTiO₃/SrTiO₃ bilayer thin films with different orientations at room temperature. Theoretical analysis indicates that the strong electrostatic coupling between the layers results in the suppression of ferroelectricity at a critical relative thickness which occurs approximately at 50%, 23%, and 12% of SrTiO₃ fraction in the (001), (110), and (111) bilayer thin films, respectively. The ferroelectric bilayer thin films are respected to have the largest electrocaloric effect at this critical relative thickness. Moreover, the electrocaloric effect strongly depends on the orientation and the (110) oriented bilayer thin films have the largest electrocaloric effect. Consequently, control of the orientation and the relative thickness of SrTiO₃ layer can be used to adjust the electrocaloric effect of ferroelectric bilayer thin films, which may provide the potential for practical application in refrigeration devices.     

Preparation and characterization of carbonyl iron/glass composite absorber as matched load for isolator

Composite absorbers made from 66 wt% carbonyl iron and 34 wt% low melting point glass powder were prepared by a pressureless sintering technique in a nitrogen atmosphere. Apparent porosity and bending strength of the as-prepared composites were investigated. The microstructure, heat resisting properties and electromagnetic properties were characterized by scanning electron microscopy, thermal gravimetric analysis–differential scanning calorimetry and vector network analyzer. The results show that the carbonyl iron/glass composite absorbers were difficult to densify. As the sintering temperature and soaking time increased, the apparent porosity first decreased and then increased, whereas the bending strength showed the opposite change. The composite absorber sintered at 520 °C for 40 min achieved the minimum apparent porosity of 13.08% and the highest bending strength of 52 MPa. Compared to the carbonyl iron/silicone rubber absorber, the carbonyl iron/glass composite absorber exhibited better heat resisting properties, and the initial oxidation temperature was increased about 200 °C. The composite absorber with a thickness of 1.25 mm showed a good microwave absorbing property in 8–12 GHz.