A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti₃Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti₃Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti₃Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti₃Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.     

Self-organized diffusion of congestion in complex networks

In this work, we propose and study a model for the diffusion of congestion in complex networks. According to the proposed model, the level of congestion on each node will be self-organized into the same value. The diffusion of congestion throughout various networks with different topologies is investigated analytically and by numerical tests. The flow fluctuations in complex networks are studied. We recover a power-law scaling relation between the standard deviation and mean flow, which is consistent with the previous studies. Finally, we extend our model by adding two constraints, which may be effective strategies for diffusing the local and the global congestion in complex networks, respectively.     

基于低分辨率色散型拉曼光谱仪的汽油苯含量快速分析

针对汽油苯含量的快速分析问题,提出了基于低分辨率色散型拉曼光谱仪的新的检测方法。由于色散型拉曼光谱中存在着严重的测量噪声和荧光背景干扰,应用多项式平滑滤波除噪声和迭代多项式拟合基线校正方法减少荧光背景的干扰。随后,分别采用岭回归、主成分回归、偏最小二乘回归方法,对炼油厂的汽油样本建立了三个苯含量的快速分析模型并对其进行验证。实验表明,基于低分辨率色散型拉曼光谱仪进行汽油苯含量分析,结合常规建模方法,重复性和再现性均满足SH/T0713—2002标准的要求,此外由于其具有低成本、小型易携带等优点,适用于日常快速分析。     

枪晶石变温拉曼光谱及其固液相微结构研究

枪晶石在传统冶金连铸保护渣中起着十分重要的作用。采用紫外激光光源和电荷耦合器件(CCD)探测器,测定了枪晶石晶体和高温拉曼光谱(温度范围:298~1 723 K),观察了其在变温状态(升温和降温过程)下的特征谱变化。谱图结果显示,枪晶石熔态微结构单元与固态的相比更为多元化,表明熔体状态下多种团簇结构共存。同时,利用枪晶石晶胞结构模型,通过Dmol3密度泛函(DFT)理论计算了其分子振动频率,将其与实验值相结合,确定了特征谱峰的归属,为进一步采用拉曼光谱法原位研究保护渣中枪晶石的结构变化与行为特征提供了重要依据。     

密闭微波消解-电感耦合等离子体质谱法测定烟用香精中多种微量元素

烟用香精对卷烟的香、吃味和质量稳定有重要影响,为了有效控制香精质量,降低卷烟主流烟气中有害元素的含量,采用密闭微波消解-电感耦合等离子体质谱法同时测定了烟用香精中铍、钒、铬、锰、镍、铜、锌、砷、硒、锶、钼、镉、铊和铅14种元素,方法的线性相关系数0.999 5~1.000 0,相对标准偏差1.3%~9.5%(n=5),检出限0.003~0.13μg.L-1,加标回收率88.1%~109.3%。结果表明方法能够满足微量元素的分析要求。用实验方法测定了38个牌号烟用香精中铍、钒等14种元素的含量。结果发现:(1)香精中锰、锌、锶的含量较高,硒、镍、铬、铜次之,铍、铊、钼、镉、钒、铅和砷的含量最低,其平均值均小于0.1μg.g-1。(2)锰、镉、锶的含量在不同香精之间差别较大,其变异系数分别为276.4%,238.7%,243.8%。     

四种新型仲胺配合物的合成、表征及与ct-DNA相互作用的光谱研究

合成了新型仲胺类配体L(N,N’-二(4-甲基苄基)乙二胺)及其四种过渡金属的硝酸盐配合物,[ML2(H2O)2]2+.2NO3-(M=CuⅡ,CoⅡ,NiⅡ,ZnⅡ),利用元素分析、红外、1H NMR等对其结构进行了表征,其中用X-ray单晶衍射解析了Cu-L单晶结构,为波谱分析推测的分子结构进行了验证。通过紫外、荧光光谱研究了该四种金属配合物与小牛胸腺DNA的相互作用,结果表明配合物与DNA的作用方式均为静电结合,Cu-L,Co-L,Ni-L,Zn-L与DNA的结合常数分别为:1.67×103,2.5×103,1.35×103和9.85×102。     

Results from DAMA/LIBRA at Gran Sasso

The DAMA project is an observatory for rare processes and it is operative deep underground at the Gran Sasso National Laboratory of the I.N.F.N. In particular, the DAMA/LIBRA (Large sodium Iodide Bulk for RAre processes) set-up consists of highly radiopure NaI(Tl) detectors for a total sensitive exposed mass of ?250 kg. Recent results, obtained by this set-up by exploiting the model independent annual modulation signature of Dark Matter (DM) particles, have confirmed and improved those obtained by the former DAMA/NaI experiment. A model independent evidence for the presence of Dark Matter particles in the galactic halo is cumulatively obtained at 8.2?σ C.L. No systematics or side reactions able to account for the measured modulation amplitude and to contemporaneously satisfy all the many specific requirements of the signature have been found or suggested by anyone over more than a decade. An example of one of the many possible model dependent corollary quests for the candidate particles and for the related astrophysical, nuclear and particle physics scenarios is presented considering the whole cumulative exposure. Future perspectives are shortly addressed.     

Finite element modeling of the interaction of laser-generated ultrasound with a surface-breaking notch in an elastic plate

The interaction of surface acoustic waves generated by laser line source in the thermoelastic regime with surface notches are investigated. The finite element method is used to establish the model of the transient displacement field for surface notches with various depths and orientation. The magnitude of the signal enhancement in the near field and the mechanism by which this occurs are explained. The positions of notches were evaluated by the reflected Rayleigh wave. The depths and orientations of the notches were also determined using a shear wave that was generated through mode conversion of a surface acoustic wave at the notch tip. The results agree with previously published experimental measurements.     

Measuring thickness change of transparent plate by electronic speckle pattern interferometry and digital image correlation

The thickness change of transparent plates was measured by electronic speckle pattern interferometry (ESPI) method and digital image correlation (DIC) method. An out-of-plane ESPI system was developed based on the Michelson interferometer, and a new thickness measurement method was designed, which is on the basis of Snell's law of refraction and DIC. The main principles and experimental procedures of these two methods were presented. The thickness change of polymethyl specimens under uniaxial tensile loading were measured by the optical techniques and compared with each other. The results reveal that the data obtained with DIC method achieve better linearity than ESPI.