Unmittelbare photometrische Bestimmung des Antimongehaltes von legierten St?hlen mit Jodid

Zusammenfassung Das photometrische Verfahren von Ploum [1,2] zur Antimonbestimmung mit Jodid in nichtlegierten Stählen wurde so modifiziert, daß einerseits die Arbeitszeit durch Vereinfachung der Methode herabgesetzt wird und es andererseits zur Untersuchung hochlegierter Stähle herangezogen werden kann. 20% Cr, 12% Ni, 3% Mo, 4% W, 2% Mn, 3% V, 1% Ti, 0,4% Si, 0,8% Nb, 0,04% Ta, 0,1% Co, 0,05% Al, 0,05% As, 0,014% Sn und 0,004% B haben keinen Einfluß. Cu > 0,2% stört. Es können Antimongehalte von 0,001–0,025% bestimmt werden.

---

Direct photometric determination of antimony in alloy steels with iodide

The method of Ploum [1,2] for the direct determination of antimony in plain steels has been modified. It has been possible to reduce the working time in simplifying the method and to apply the procedure to the investigation of high-alloy steels. 20% Cr, 12% Ni, 3% Mo, 4% W, 2% Mn, 3% V, 1% Ti, 0.4% Si, 0.8% Nb, 0.04% Ta, 0.1% Co, 0.05% Al, 0.05% As, 0.014% Sn and 0.004% B have no effect. Cu >0.2% interferes. Sb contents from 0.001 to 0.025% can be determined.

     

Combined microwave-assisted isolation and solid-phase purification procedures prior to the chromatographic determination of phenolic compounds in plant materials

A fast, sensitive and selective procedure employing a combination of microwave-assisted extraction (MAE) and solid phase extraction (SPE) was applied prior to liquid chromatographic identification and quantification of phenolic compounds in plant materials. MAE has been tested and optimized for the isolation of phenolic acids (gallic, protocatechuic, p-hydroxybenzoic, chlorogenic, vanilic, caffeic, syringic, p-coumaric, ferulic, sinapic, benzoic, m-coumaric, o-coumaric, rosmarinic, cinnamic acids) and 3,4-dihydroxybenzaldehyde, syringaldehyde, p-hydroxybenzaldehyde, and vanillin in various plants. The effects of experimental conditions on MAE efficiency, such as solvent composition, temperature, extraction time, have been studied. The extraction efficiencies were compared with those obtained by computer-controlled, two-step Soxhlet-like extractions. Plant extracts were purified and phenolic compounds were pre-concentrated using SPE on polymeric RP-105 SPE sorbent prior to HPLC analysis. Chromatographic separation was carried out on a Hypersil BDS C₁₈ column using a mobile phase consisted of 0.3% (v/v) acetic acid in water (solvent A) and methanol (solvent B) at flow rate 0.6 ml min⁻¹ and column temperature 30 °C with gradient elution.     

Neue Koordinationsverbindungen aus Triorganylzinn(IV)-dimesylamiden und Neutralliganden: Einkern- und Mehrkernkomplexe mit molekularer oder ionischer Kristallstruktur

Polysulfonylamines. CII. New Coordination Compounds Derived from Triorganyltin(IV) Dimesylamides and Uncharged Ligands: Mononuclear and Polynuclear Complexes with Molecular or Ionic Crystal Structures The purpose of this report is to draw attention to the remarkable versatility of the dimesylamides R₃SnA [A^– = (MeSO₂)₂N^–; R = Me ( 1 a ) or Ph ( 1 b )] as precursors for pentacoordinate triorganyltin(IV) complexes belonging to four distinct structural types. Representative complexes were prepared by treating 1 a or 1 b in the appropriate molar ratios with unidentate thiourea or urea-type ligands or with the bidentate ligand [Ph₂P(O)CH₂]₂ (DPPOE). The following compounds were characterized by X-ray analysis: [Me₃Sn(A)(thiourea)] ( 2 a ; monoclinic, space group P2₁/n), [Ph₃Sn(A)(tetramethylthiourea)] ( 2 b ; monoclinic, P2₁, two independent formula units), [Me₃Sn(1-methylurea)₂]⁺ · A^– ( 3 a ; monoclinic, P2₁/c), [Ph₃Sn(1,1-dimethylurea)₂]⁺ · A^– ( 3 c ; triclinic, P1), [{Ph₃Sn(A)}₂(μ-dppoe)] ( 4 ; triclinic, P1), [Ph₃Sn(μ-dppoe)]_nⁿ⁺ · n A^– · n MeCN ( 5 ; monoclinic, P2₁/c). The lattices of 2 a , 2 b and 4 contain discrete uncharged formula units which are mononuclear for 2 a and 2 b or dinuclear for 4 , whereas 3 a , 3 c and 5 have ionic structures featuring mononuclear cations for 3 a and 3 c or an infinite linear-polymeric cation for 5 . In all the structures, the tin atoms adopt trigonal-bipyramidal geometries, the apical positions being occupied in 2 a and 2 b by the S atom of the thiourea and one O atom of A^–, in 3 a and 3 c by the O atoms of two urea-type ligands, in 4 by an O atom of the bridging DPPOE molecule and one O atom of A^–, and in 5 by two phosphoryl O atoms from different bridging DPPOE ligands. In the structures of 2 a , 3 a and 3 c , the (thio)urea NH functions are connected to A^– via intermolecular or interionic N–H … O and N–H … N hydrogen bonds. Crystals of [{Me₃Sn(bipyH⁺ … A^–)}₂(μ-bipy)]²⁺ · 2 A^– ( 6 ; monoclinic, C2/c) formed adventitiously in a reaction mixture containing 1 a and 4,4′-bipyridine. The rod-like supramolecular cation of 6 (length ca. 4 nm) is built up from two Me₃Sn⁺ units bridged through bipy and unidentally coordinated by a monoprotonated bipy (= bipyH⁺), resulting in a trigonal-bipyramidal geometry around tin (N atoms apical); each of the terminal bipyH⁺ ligands forms an ⁺N–H … N^– hydrogen bond with one A^–.     

SIMS Profiling and TEM of CVD Films on Multi-Filament Samples

 A suitable fibre coating is essential to obtain optimal fibre-matrix interaction in fibre-strengthened composite materials. Thin films (∼100 nm) of silicon carbide, turbostratic carbon, and boron nitride were deposited by CVD as single or double layers on commercial multi-filament fibres in a continuous process. The fibre material itself may be carbon, alumina, silicon carbide, or a quaternary ceramic of SiCBN. The application of MCs⁺-SIMS enables one to determine the composition (including impurities of H and O) of various fibre coating materials with an accuracy of at least 20% relative. Due to the special geometry of the multi-filament samples the depth resolution of the SIMS depth profiles is limited, nevertheless, layered structures and some details of the interface between coating and fibre can be studied. The depth calibration of the SIMS depth profiles is derived from sputter rates established on flat samples with a composition similar to that of the fibre coating material. However, the obtained film thicknesses are not extremely different from the values derived from TEM on cross sections of coated fibres.     

Direct Synthesis of ZIF-8 on Transmission Electron Microscopy Grids Allows Structure Analysis and 3D Reconstruction

The first example of layer-by-layer growth of a metal–organic framework (MOF) directly on transmission electron microscopy (TEM) grids is described. ZIF-8 is deposited on thin amorphous carbon films and subjected to a structure analysis by (scanning) TEM ((S)TEM). This method serves as a two-in-one synthesis and TEM sample-preparation technique and allows straightforward analysis of ZIF-8 crystallites. Artifacts resulting from sample preparation are completely avoided by this approach. The morphological properties, crystal structure, and the chemical composition of the material are investigated with high spatial resolution by a variety of methods of (analytical) electron microscopy. Furthermore, the incorporation of metallic nanoparticles in ZIF-8 by integrating a corresponding step into the layer-by-layer deposition process is examined. The formation of ZIF-8 crystals on the film proceeds as under the absence of nanoparticle-forming synthesis steps. However, the nanoparticles rather cover the supporting amorphous carbon film than being incorporated in the ZIF-8 material. This information cannot be obtained from standard characterization techniques but requires the application of analytical (S)TEM techniques.     

Mediation of metal chelation in cysteine-derived tetramate systems

A study of bicyclic tetramates modified with a bulky ester, which leads to steric hindrance of distal chelating atoms as a route for the alteration of metal binding ability is reported. This approach required the development of a direct method for the synthesis of different esters of cysteine from cystine, which then provided access to bicyclic tetramates by Dieckmann cyclisation. Further derivation to ketones and carboxamides by Grignard addition and transamination reactions respectively provided rapid access to a chemical library of tetramates with diverse substitution. Of interest is that bicyclic tetramate ketones and carboxamides showed different tautomeric and metal binding behaviour in solution. Significantly, in both systems, the incorporation of bulky C-5 esters at the bridging position not only reduced metal binding, but also enhanced antibacterial potencies against Gram-positive MRSA bacteria. Those tetramates with antibacterial activity which was not metal dependent showed physiochemical properties of MSA of 559–737 Ų, MW of 427–577 Da, clogP of 1.8–6.1, clogD_7.4 of −1.7 to 3.7, PSA of 83–109 Ų and relative PSA of 12–15% and were generally Lipinski rule compliant. A subset of tetramates exhibited good selectivity towards prokaryotic bacterial cells. Given that the work reported herein is synthesis-led, without the underpinning detailed mechanistic understanding of biological/biochemical mechanism, that the most active compounds occupy a small region of chemical space as defined by MW, clogP, PSA and %PSA is of interest. Overall, the bicyclic tetramate template is a promising structural motif for the development of novel antibacterial drugs, with good anti-MRSA potencies and appropriate drug-like physiochemical properties, coupled with a potential for multi-targeting mechanisms and low eukaryotic cytotoxicity.

A study of bicyclic tetramates modified with a bulky ester, which leads to steric hindrance of distal chelating atoms, is used as a route for the alteration of metal binding ability.     

Single-bubble sonoluminescence in air-saturated water

Single bubble sonoluminescence (SBSL) is realized in air-saturated water at ambient pressure and room temperature. The behavior is similar to SBSL in degassed water, but with a higher spatial variability of the bubble position. A detailed view on the dynamics of the bubbles shows agreement between calculated shape stability borders but differs slightly in the equilibrium radii predicted by a mass diffusion model. A comparison with results in degassed water is done as well as a time resolved characterization of bubble oscillation, translation, and light emission for synchronous and recycling SBSL. The formation of streamer structures is observed in the same parameter range, when bubble nuclei are present. This may lead to a unified interpretation of SBSL and multibubble sonoluminescence.     

Vergleichende Untersuchungen über stationäre Phasen in der schnellen Flüssig-Chromatographie

The following stationary phase materials for column liquid chromatography: Corasil I and II, Perisorb A, and Zipax were characterized as to their particle size and their pore structure of the porous layer. The superficially porous packings were tested at identical conditions in liquid-solid and liquid-liquid chromatography. The chromatographic parameters k′, h, h=f(u), N /t, K and K · N /t were evaluated. The results were discussed in connection with the surface proporties of the stationary phase materials.     

Über die photometrische Bestimmung des Cergehaltes legierter Stähle

After review of literature and experimental work photometry with o-tolidine is preferred as a sensitive, exact and simple procedure to determine < 0.1% cerium in steel. The precipitation with oxalate, thoroughly worked out, is recommended as a simple method to separate cerium from the other elements occurring in steels. With high-alloy steels a double precipitation is necessary. This involves a loss of 4% of cerium which, however, is reproducible and thus can be considered in calibrating. Ce contents from 0.002% to 1,0% can be determined.