Elution behavior of styrene oligomer fractions in supercritical fluid chromatography

Summary In supercritical fluid chromatography (SFC), the elution behavior of styrene oligomers in pentane depends greatly on the degree of oligomerization, n. The influence of capacity ratio, k, on the lower oligomers up to about n=11 resembles the behavior of other substrates of low molecular weight, like aromatic hydrocarbons. Thus, with pentane of 100 bar and below, minima are found in plots of k versus temperature. In contrast, the k of oligomers of higher molecular weight (n>11) increase monotonously with increasing temperature. The studies were performed using oligostyrene fractions obtained by semipreparative SFC fractionation.     

Raman and cathodoluminescence spectroscopic investigations on Permian fossil wood from Chemnitz--a contribution to the study of the permineralisation process

Samples of different three-dimensionally preserved fossil plants (Medullosa sp., Dadoxylon sp., Calamodendron striatum, Psaronius sp.) from the Lower Permian petrified forest of Chemnitz were examined with regard to their chemical composition and structural order. Raman spectroscopy and cathodoluminescence microscopy are shown to be powerful tools for such investigations. Silicified wood from Chemnitz-Hilbersdorf generally shows yellow cathodoluminescence (CL) of the cell walls and only weak yellow-brownish CL of the cell lumina. By time-resolved cathodoluminescence spectroscopy, a secondary mineralisation of hydrothermal origin was recognized. The latter is shown by short-lived blue CL at the cell walls extinguishing the yellow signal. Therefore, after the primary silicification step a secondary mineralisation step initiated by hydrothermal processes, seems to have taken place at probably slightly higher temperatures. The resulting silica matrix consists of phanerocrystalline and microcrystalline alpha-quartz as well as microcrystalline moganite, both partially associated with iron oxides. Dadoxylon sp. is a prominent example for parallel permineralisation by alpha-quartz and fluorspar, which is outstanding for the Chemnitz Petrified Forest. CL on this samples shows parallel silicification and fluoritisation, followed by infiltration of iron oxides. Permineralised samples show very low percentage of original organic remains. The seed fern Medullosa, for example, shows dispersed carbon, which is mainly restricted to the centres of the typical star-shaped vascular bundles. Raman spectroscopy revealed that these carbonaceous particles are of an anthracite structure. For experimental confirmation coal samples of different rank, especially anthracite from different geological times and localities, were studied by means of Raman spectroscopy. The remaining pith of the vascular bundles is white-coloured and consists of alpha-quartz and moganite, whereas surrounding tracheides exhibit white and reddish coloured parts. The reddish parts, mainly found in the rays, additionally contain alpha-Fe2O3 and Fe3O4 among the SiO2 polymorphs of alpha-quartz and moganite. Sometimes iron oxides could have dominated permineralisation processes as the peak intensities of distinct parts of the samples suggest.     

Excess Molar Volumes and Liquid–Liquid Equilibria of the Ionic Liquid 1-Methyl-3Octyl-Imidazolium Tetrafluoroborate Mixed with Butan-1-ol and Pentan-1-ol

Experimental densities were measured for the system 1-methyl-3-octyl-imidazolium tetrafluoroborate [OMIM][BF₄] + butan-1-ol, + pentan-1-ol at 298.15 K and ambient pressure using a vibrating tube densimeter, taking into account the influence of the viscosity correction. Excess molar volumes V^E have been determined. V^E is quite small and negative in the alcohol-rich range of the mixture composition and positive in the alcohol-poor range. LLE data of [OMIM][BF₄] + pentan-1-ol have been measured using a laser light scattering cell for detecting cloud points at different compositions in the temperature range of 282–292 K. A miscibility gap with an upper critical solution temperature (UCST) of 292 K has been found.     

Synthesis and Circular Dichroism of Both Enantiomers of 2-deuterofluoroacetic acid ( Fluoro[2H1]acetic acid)

Sharpless epoxidation of (E)-1-(trimethylsilyl)[1-²H₁]oct-1-en-3-o1 ( 3a ) yielded (1S,2S,3S)- and (1R,2R,3R)-1-(trimethylsilyl)-1,2-epoxy[1-²H₁]octan-3-ols ( 4a and 4b , resp.) which were converted in three steps into (S)- and (R)-fluoro[ ²H₁]acetic acid ( 7a and 7b , resp.) in good yields. Their high isotopic and optical purity was established by ¹H- and ¹⁹F-NMR, mass, and circular-dichroism spectroscopy.     

Diffusion of biostimulators into plant tissues

Biostimulators are substances able to enhance the immune system of cultivated crops and support plant metabolism. Their utilization helps to reduce the amount of chemicals used in agriculture. To perform the desired effect, a biostimulator must be able to penetrate into the plant tissue. The time of penetration however, is limited, since the biostimulator must remain in a liquid state. This is of great importance—especially in field conditions, where the treated plants are exposed to different weather condition and other extrinsic factors. A mathematical model based on diffusion mechanisms has been elaborated to describe the biostimulator transport process from penetration of the leaves into the plant’s inner tissues. By means of the effective diffusion coefficient of the prepared specific protein hydrolyzate, this model can be used to estimate the time necessary for the uptake of the minimal active amount of the biostimulator.     

Experimental-based material parameter identification of oocytes

In comparison to other eukaryotic cells, mammalian oocytes are characterised by a relative high diameter allowing in turn a straightforward micromechanical testing to study their mechanical properties. The structure of mammalian oocytes is characterised by the so-called zona pellucida (ZP), a thick glycoprotein layer, surrounding the cells interior, the ooplasm. In contrast to other cells, where the load is mainly carried by inner cell structures, in case of oocytes a huge amount of external loads is carried by the ZP. Aim of this work is the determination of the mechanical properties of oocytes. Therefore, a micromechanical setup has been developed and installed on a microscope. Beside the determination of the force-strain relation during loading, the deformation of the oocytes has been recorded optically, too. Both, the force-strain curves and the optical recordings build the basis for a proper parameter identification technique based on the inverse finite element method. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Integral representation of a solution to the Stokes–Darcy problem

With methods of potential theory, we develop a representation of a solution of the coupled Stokes–Darcy model in a Lipschitz domain for boundary data in H^?1/2. Copyright © 2014 John Wiley & Sons, Ltd.