Multichromophoric π‐Conjugation: Modular Design for Gated and Cascade Energy Transfer

Multichromophore arrays allow for cascade energy transfer. As an isoelectronic analogue of indacenyl, bis(triazolo)benzene features a fused tricyclic skeleton that rigidly places two π‐extended triazoles in close proximity. Such triazole‐based fluorophores behave as electronically independent modules in the ground states, but become tightly coupled upon photoexcitation for highly efficient excitation energy transfer (EET) that can be gated by external stimuli. Taking this donor–acceptor fluorophore system a step further, we have designed and implemented a cascade EET. Here, the initial excitation takes part in a circular relay to arrive at the longest‐wavelength emitting site as the final destination. Modularly constructed triazoloarenes should serve as versatile platforms for chemically controlled optical signaling.     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

Interactive Phenomena of a Rotating Arc and a Premixed CH4 Flame

The interactive phenomena between a rotating arc and a premixed methane/air flame have been investigated. The effects of the rotating arc on the flame were observed: both lean and rich flammability limit was extended with the rotating arc on. More interestingly, the opposite interactions, i.e., the effects of the flame on the rotating arc, were also observed: the arc length, angular speed, and electrical characteristics are affected by the flame. An analysis of the optical emission spectra showed that the rotating arc generates chemically active species such as excited N₂ molecules and O and H atoms. An analysis of the gas products indicated that the concentrations of the major gas products such as CO₂, CO, and H₂ were not significantly affected by the rotating arc, although the flammability limit are significantly extended. Unlike these major gas products, minor products like NO_x emissions increased by an order of magnitude in the presence of a rotating arc under certain air/fuel conditions.     

Synthesis and evaluation of triphenylphosphonium conjugated 18F-labeled silica nanoparticles for PET imaging

Journal of Radioanalytical and Nuclear Chemistry - Accumulation of triphenylphosphonium (TPP) is normally observed in the mitochondria from the extracellular spaces due to the high difference in...     

Orientational and electro-optical properties of liquid crystal aligned with a directly spinnable carbon nanotube web

We investigated the orientational and electro-optical properties of a nematic liquid crystal (LC) aligned with a directly spinnable carbon nanotube (CNT) web functioning both as an electrode and as an alignment layer. The LC molecules were uniformly oriented along the drawing direction of the CNT web and the spatially averaged birefringence was comparable to a rubbed polyimide sample. The CNT web sample also showed smaller residual DC and hysteresis compared to the polyimide sample.     

Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Comparative Study of Methane Activation Process by Different Plasma Sources

In this paper, we compare the characteristics of methane activation by diverse plasma sources. The test conditions of reactant flow rate and composition are fixed for each plasma source to eliminate any possible misleading effects from varying test conditions. Among the diverse characteristics of each plasma source, we focus on the electron energy and degree of thermal activation in evaluating the cost-effectiveness of methane decomposition. The reaction is evaluated based on the selectivity of specific products, including H₂, C₂H₆, and C₂H₂. Among the tested plasma sources, those that provide a somewhat thermal environment have a rather high degree of warmness, resulting in higher methane conversion and lower operational costs. As the non-thermal characteristics of the plasma sources become stronger, the selectivity of C₂H₆ increases. This reflects C₂H₆ formation from the direct collision of CH₄ with high-energy electrons. On the other hand, as the degree of warmness increases, the selectivity of H₂ and C₂H₂ increase. The results give an insight into possible tools for process control or selectivity control by varying the degree of warmness in the plasma source. The process optimization and cost reduction of methane activation should be based on this concept of selectivity control.     

Adsorption and desorption of toluene on nanoporous TiO2/SiO2 prepared by atomic layer deposition (ALD): influence of TiO2 thin film thickness and humidity

Adsorption and desorption of toluene on bare and TiO₂-coated silica with a mean pore size of 15 nm under dry and humid conditions were studied using toluene breakthrough curves and temperature programmed desorption (TPD) of toluene and CO₂. Two TiO₂/silica samples (either partially or fully covered with TiO₂) were prepared with 50 and 200 cycles of TiO₂ atomic layer deposition (ALD), respectively. The capacity of silica to adsorb toluene improved significantly with TiO₂-thin film coating under dry conditions. However, toluene desorption from the surface due to displacement by water was more pronounced for TiO₂-coated samples than bare samples under humid conditions. In TPD experiments, silica with a thinner TiO₂ film (50-ALD cycled) had the highest reactivity for toluene oxidation to CO₂ both in the absence and presence of water. Toluene adsorption and oxidation reactivity of silica can be controlled by modifying the silica surface with small amount of TiO₂ using ALD.     

Synthesis of Poly(benzothiadiazole‐co‐dithienobenzodithiophenes) and Effect of Thiophene Insertion for High‐Performance Polymer Solar Cells

We describe herein the synthesis of novel donor–acceptor conjugated polymers with dithienobenzodithiophenes (DTBDT) as the electron donor and 2,1,3‐benzothiadiazole as the electron acceptor for high‐performance organic photovoltaics (OPVs). We studied the effects of strategically inserting thiophene into the DTBDT as a substituent on the skeletal structure on the opto‐electronic performances of fabricated devices. From UV/Vis absorption, electrochemical, and field‐effect transistor analyses, we found that the thiophene‐containing DTBDT derivative can substantially increase the orbital overlap area between adjacent conjugated chains and thus dramatically enhance charge‐carrier mobility up to 0.55 cm² V^?1 s^?1. The outstanding charge‐transport characteristics of this polymer allowed the realization of high‐performance organic solar cells with a power conversion efficiency (PCE) of 5.1 %. Detailed studies on the morphological factors that enable the maximum PCE of the polymer solar cells are discussed along with a hole/electron mobility analysis based on the space‐charge‐limited current model.     

Studies of degradation behaviors of poly (3‐hexylthiophene) layers by X‐ray photoelectron spectroscopy

Degradation behaviors of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) layers on NiO in the presence of H₂O at ambient pressure and dark conditions were studied using X‐ray photoelectron spectroscopy (XPS). Upon H₂O exposure at 120 °C, partial oxidation of P3HT together with molecular water incorporation, but with the maintained local ring‐structure, were deduced by XPS. Valence band spectra of XPS evidenced that the partial oxidation of P3HT local structure could alter π‐conjugation systems of P3HT layers, forming additional electronic states close to its original highest occupied molecular orbital. For comparison, P3HT surface was also exposed to O₂, and no change in the S 2p and C 1s spectra was found by O₂ exposure at 120 °C, implying that H₂O plays a major role at the initial stage of P3HT oxidation. Copyright © 2014 John Wiley & Sons, Ltd.