Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

Proof of semialgebraic covering mapping cylinder conjecture with semialgebraic covering homotopy theorem

In this paper we prove the semialgebraic version of Palais' covering homotopy theorem, and use this to prove Bredon's covering mapping cylinder conjecture positively in the semialgebraic category. Bredon's conjecture was originally stated in the topological category, and a topological version of our semialgebraic proof of the conjecture answers the original topological conjecture for topological G-spaces over “simplicial” mapping cylinders.     

Loniceroside C,an antiinflammatory saponin from Lonicera japonica

A new triterpenoid saponin, loniceroside C was isolated from the aerial parts of Lonicera japonica. Its structure was established to be 3-O-beta-D-glucopyranosyl hederagenin 28-O-alpha-L-rhamnopyranosyl (1-->2)-[beta-D-xylopyranosyl(1-->6)]-beta-D-glucopyranosyl ester by spectroscopic techniques and chemical transformations. Loniceroside C showed in vivo antiinflammatory activity against mouse ear edema provoked by croton oil.     

Fluoroquinolone Antimicrobials: Singlet Oxygen, Superoxide and Phototoxicity

The fluoroquinolone antibacterial agents possess photo-sensitizing properties that lead to phototoxic responses in both human and animal subjects. The phototoxicity order reported in humans is: fleroxacin > lomefloxacin, pefloxacin > ciprofloxacin ? enoxacin, norfloxacin and ofloxacin. Studies both in vivo and in vitro have related this phototoxicity to the generation of reactive oxygen species including hydrogen peroxide and the hydroxyl radical. We determined the quantum yields of singlet oxygen generation (φ_Δ,) by detection of the singlet oxygen (¹O₂) luminescence at 1270 tun for several fluoroquinolones, naphthyridines and other structurally related compounds. All the fluoroquinolones examined have low φ_Δ values ranging from 0.06 to 0.09 in phosphate buffer at pD 7.5. We also determined the ¹O₂ quenching constants for these compounds and their values were on the order of 10⁶M^?1 s¹, except for lomefloxacin whose rate constant was 1.8 × 10⁷M^?1 s^?1. The φ_Δ values were significantly decreased in a solvent of lower polarity such as methanol (0.007 ≤φ_Δ≤ 0.02). The production of ¹O₂ by these antibiotics did not correlate with the order reported for their phototoxicity. We also measured the photogeneration (λ > 300 nm) of superoxide by these antibacterials in dimethylsulfoxide using electron paramagnetic resonance and the spin trap 5,5-dimethyl-l-pyrroiine N-oxide. Although there is not a one-to-one correspondence between the relative rates of superoxide generation and the phototoxicity ranking of the fluoroquinolones, the more phototoxic compounds tended to produce superoxide at a faster rate. Nevertheless, the magnitudes of the observed differences do not appear sufficient to explain the range of fluoroquinolone phototoxicity potencies in human and animal subjects in general and the high activity of fleroxacin and lomefloxacin in particular. For these latter drugs the photoinduced loss of the F₈ atom as fluoride and the concomitant generation of a highly reactive carbene at C-8 provide a more plausible mechanism for their potent phototoxic and photocarcinogenic properties.     

A SPIN TRAPPING STUDY OF THE PHOTOCHEMISTRY OF 5,5-DIMETHYL-1-PYRROLINE N-OXIDE (DMPO)

The photochemistry of 5,5-dimethyl-l-pyrroline N -oxide (DMPO) has been studied in benzene, cyclohexane and aqueous buffer solutions (pH 7.4) by means of electron paramagnetic resonance (EPR) and the spin trapping technique. Ultraviolet irradiation of DMPO in aqueous buffer with unfiltered UV radiation from a Xe arc lamp results in photoionization of the spin trap and the generation of the DMPO cation radical, DMPO⁺. The aqueous electron, e_aq⁻, was trapped by DMPO and detected as the DMPO/H adduct. The DMPO⁺- reacted with the water to yield the DMPO/OH adduct. Ultraviolet irradiation of DMPO in nitrogen-saturated benzene gave an unidentified carbon-centered DMPO adduct that was replaced by hydroperoxyl and alkoxyl adducts of DMPO when oxygen was present. Experiments employing ¹⁷O₂ gas indicated that the oxygen in the DMPO alkoxyl adduct was derived from molecular oxygen. However, UV irradiation of DMPO in cyclohexane yielded the cyclohexyl and cyclohexyloxyl adducts of DMPO in nitrogen-saturated and air-saturated solutions, respectively. These observations suggest that in aprotic solvents UV irradiation of DMPO generates a carbon-centered radical (R⁻), derived from the trap itself, which in benzene reacts with oxygen to yield an alkoxyl radical (RO⁻), possibly via a peroxyl radical (ROO⁻) intermediate. In cyclohexane R⁻ abstracts a hydrogen atom from the solvent to yield the cyclohexyl radical in the absence of oxygen and the cyclohexyloxyl radical in the presence of oxygen. These findings indicate that when DMPO is used as a spin trap in studies employing short-wavelength UV radiation (λ < 300 nm) the photochemistry of DMPO cannot be ignored.     

XPS analysis of the effect of Pt addition to Pd catalysts for complete benzene oxidation

Pt-Pd bimetallic catalysts were prepared in order to develop and investigate catalysts having excellent activity and stability for benzene destruction. The effect of Pt addition to Pd catalysts is studied by XPS analysis. This revised version was published online in August 2006 with corrections to the Cover Date.     

Anthocyanins protect against A2E photooxidation and membrane permeabilization in retinal pigment epithelial cells

The pyridinium bisretinoid A2E, an autofluorescent pigment that accumulates in retinal pigment epithelial cells with age and in some retinal disorders, can mediate a detergent-like perturbation of cell membranes and light-induced damage to the cell. The photodynamic events initiated by the sensitization of A2E include the generation of singlet oxygen and the oxidation of A2E at carbon-carbon double bonds. To assess the ability of plant-derived anthocyanins to modulate adverse effects of A2E accumulation on retinal pigment epithelium (RPE) cells, these flavylium salts were isolated from extracts of bilberry. Nine anthocyanin fractions reflecting monoglycosides of delphinidin, cyanidin, petunidin and malvidin were obtained and all were shown to suppress the photooxidation of A2E at least in part by quenching singlet oxygen. The anthocyanins tested exhibited antioxidant activity of variable efficiency. The structural characteristics relevant to this variability likely included the ability to form a stable quinonoidal anhydro base at neutral pH, a conjugated diene structure in the C (pyrane) ring, the presence of hydroxyl groups on the B (benzene) ring and the relative hydrophobicity conferred by the arrangement of substituents on the B ring. Cells that had taken up anthocyanins also exhibited a resistance to the membrane permeabilization that occurs as a result of the detergent-like action of A2E.     

Role of copper chloride on the surface of activated carbon in adsorption of methyl mercaptan

In this paper, adsorption characteristics of methyl mercaptan on virgin activated carbon and copper chloride impregnated activated carbons were studied by using a dynamic adsorption method in a fixed bed. The activated carbons were characterized by nitrogen adsorption, XRD, TGA and solubility tests. The impregnation of copper chloride on the activated carbon significantly enhanced the adsorption capacity of methyl mercaptan, despite a notable decrease in microporosity. It is likely that copper chloride may act as adsorption site for methyl mercaptan. Copper chloride on the activated carbon in a range of 3-20 wt% Cu content was present mostly in the amorphous form of CuCl(2), according to the results of the solubility, XRD and TGA tests. Starting at 10 wt% in Cu loading, the adsorption capacity for methyl mercaptan decreases gradually. It is likely that a decrease in the degree of copper chloride dispersion and an accessibility of small pores may lead to the decrease in the adsorption capacity of the activated carbon for methyl mercaptan.