Studies on the copolymerization of unsaturated 1,3-dioxane derivatives—IV. Radical copolymerization of 2-furyl-5,5-dimethyl-1,3-dioxane with maleic anhydride

The copolymerization of 2-furyl-5,5-dimethyl-1,3-dioxane with maleic anhydride in the presence of a radical catalyst yields equimolar, alternating copolymers in which the furyl units have 2,5-linkage. It has been shown that 2-furyl-5,5-dimethyl-1,3-dioxane forms a charge transfer complex with maleic anhydride. The equilibrium constant for the complex was determined by NMR spectroscopy.     

An efficient reagent for the phosphorylation of deoxyribonucleosides, DNA oligonucleotides, and their thermolytic analogues

[reaction: see text] The phosphoramidite 11 was prepared in three steps from methyl 2-mercaptoacetate and demonstrated efficiency in the synthesis of conventional 5'-/3'-phosphate/thiophosphate monoester derivatives of 2'-deoxyribonucleosides and DNA oligonucleotides. Moreover, the use of 11 has enabled the preparation of the dinucleoside phosphorothioate analogue 26 in high yields (>95%) with minimal cleavage (<2%) of the thermolytic thiophosphate protecting group.     

Determination of total carbon and total organic carbon from volatile air pollutants. Part I

Summary A new method of collection of representative air samples for the determination of TC and TOC from volatile air pollutants has been developed. The organic substances undergo combustion and only the carbon dioxide produced is concentrated on molecular sieve 5 A at ambient temperature. The CO₂ is subsequently liberated by thermal desorption at ca. 380°C in a stream of purified gas. Atmospheric CO₂ must be removed first and this can be done (at the sample flow rate of 700 ml/min) by a layer of Ascarite heated at 90° C. Organic compounds passing through the layer are then combusted by a dynamic method utilizing Körbl catalyst and the CO₂ formed is concentrated on a molecular sieve 5 A, followed by thermal desorption and final determination. Organic acids are also retained by the first CO₂ absorber. A diffusion cell for preparation of the mixtures of purified air with vapours of organic compounds is described.

---

Zusammenfassung Eine neue Anreicherungsmethode zur Gewinnung representativer Luftproben zur Bestimmung des Gesamtkohlenstoffgehaltes und des Gehaltes an organischem Kohlenstoff (TOC) aus flüchtigen Luftverunreinigungen wurde entwickelt. Während der Probenahme werden die flüchtigen Verunreinigungen verbrannt und nur das entstandene Kohlendioxid bei Zimmertemperatur am Molekularsieb 5A angereichert. Anschließend wird CO₂ bei ca. 380° C im gereinigten Gasstrom thermisch desorbiert. Bei der TOC-Bestimmung muß atmosphärisches CO₂ vorangehend aus dem Luftstrom entfernt werden und wird an einer auf 90° C erwärmten Ascariteschicht gebunden. Die durchfließenden organischen Verbindungen werden dann im dynamischen System am Körblkatalysator oxydiert, das entstandene CO₂ am Molekularsieb 5A angereichert, thermisch desorbiert und einer Endbestimmung zugeführt. Organische Säuren werden gleichfalls durch den ersten CO₂-Absorber gebunden. Eine Diffusionszelle zur Herstellung von Gemischen gereinigter Luft mit Dämpfen organischer Verbindungen wurde beschrieben.

     

Analytical control of silica glass production. Voltammetric determination of titanium and iron in raw materials and silica glass samples

Adsorptive stripping voltammetric (AdSV) methods are presented for the determination of titanium and iron in quartz and silica glass samples obtained after pressure decomposition. Mandelic acid and catechol were used as complexing agents for titanium and iron, respectively. The method for titanium determination is based on the catalytic effect of chlorate ions. An insoluble residue remaining after decomposition of quartz and silica glass samples in HF+H2SO4 mixture was checked by energy-dispersive X-ray analyses. ET-AAS was applied as a reference method to AdSV measurements.     

Mechanistic Study on the Oxidation of Promazine and Chlorpromazine by Hexaimidazolcobalt(III) in Acidic Aqueous Media

The kinetics of the oxidation of promazine and chlorpromazine by hexaimidazolcobalt(III) were studied in the presence of a large excess of cobalt(III) and H⁺ ions using u.v.–vis. spectroscopy ([Co^III] = (1–6) × 10⁻³ m, [ptz] = (2.5–10) × 10⁻⁵ m, [H⁺] = 0.05–0.8 m, I = 1.0 m (H⁺, Na⁺, Cl⁻), T = 333–353 K, l = 1 cm). In each case, the reversible reaction leads to formation of cobalt(II) species and a stable cationic radical. A linear dependence of the pseudo-first-order rate constant (k_obs) on [Co^III] with a non-zero intercept was established for both phenothiazine derivatives. A marked difference in the observed reaction rate for promazine and chlorpromazine is associated with the difference in its ability to undergo oxidation and is consistent with a trend in the redox potential changes for these reductants. The activation parameters for reactions studied were determined. Mechanistic consequences of all the results are discussed.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary     

Thermal decomposition of metal polyacrylates

Results of thermal and pyrolysis-GC/MS analyses of Na, Ca and Mg polyacrylates are presented. It was confirmed that the main decomposition reactions of the Na salt take place in the temperature range 420 – 470 and those of the other two polymers in the range 450–490. It was found that the solid residue after decomposition was the metal carbonate or oxide, while the volatile products consisted of H₂, CO, CO₂, saturated and unsaturated hydrocarbons (including cycloolefins and aromatic hydrocarbons) and aliphatic ketones. This suggests that the thermal decomposition of the metal polyacrylates proceeds via side-chain splitting and breaking of the main chain of the polymer, without retropolymerization.

---

Zusammenfassung Die Ergebnisse der Thermo- und Pyrolyse-GC/MS-analysen von Na-, Ca- und Mg-Polyacrylaten werden beschrieben. Es wurde bestÄtigt, dass die Hauptzersetzungsreaktionen des Natriumsalzes im Temperaturbereich von 420 bis 470, jene der anderen zwei Polymeren im Bereich von 450 bis 490 ablaufen. Es wurde nach der Zersetzung ein fester Rückstand von Metallkarbonat oder -oxid gefunden, wÄhrend die flüchtigen Produkte aus N₂, CO, CO₂, gesÄttigten und ungesÄttigten Kohlenwasserstoffen (darunter Zykloolefinen und aromatischen Kohlenwasserstoffen) und aliphatischen Ketonen bestanden. Dies lÄsst darauf schliessen, dass sich die thermische Zersetzung der Metallpolyacrylate über die Abspaltung der Seitenkette und der Spaltung der Hauptkette des Polymers ohne Retropolymerisation vollzieht.

---

Résumé On présente les résultats des analyses thermiques et des produits de décomposition pyrolytique par chromatographie en phase gazeuse et spectrométrie de masse (GC/MS) des polyacrylates de Na, Ca et Mg. On confirme que la réaction de décomposition principale du sel de sodium a lieu entre 420 et 470 et celle des deux autres polymères entre 450 et 490. On trouve que le résidu solide après décomposition est le carbonate ou l'oxyde du métal, tandis que les produits volatils consistent en N₂, CO, CO₂, en hydrocarbures saturés et non-saturés (y compris les cyclooléfines et hydrocarbures aromatiques) et en cétones aliphatiques. Cela permet de supposer que la décomposition thermique des polyacrylates métalliques s'effectue par coupure de la chaÎne latérale et par rupture de la chaÎne principale du polymère, sans rétropolymérisation.

---

-- -- Na, Ca Mg. , 420–470, — 450–490. , . H₂, CO, CO₂, , , . , .

     

Magnon spectrum and curie temperature of doped ferromagnetic semiconductors

The influence of a partially filled conduction band on the magnetic properties of ferromagnetic semiconductors is studied within the framework of thes-f model. Allowing for magnon scattering to arbitrary order in the form of virtual electron- holecreation the magnon spectral density is derived, from which one gets magnon energies which are substantially renormalized by the presence of conduction electrons. In particular it is shown how the quasiparticle structure of the electronic excitation energies [4, 5] leads to scattering corrections in the magnon spectrum. These corrections are always negative and reduce the positive mean field part, which is proportional to the electron densityn. The calculated magnon spectrum is then used to determine the strikingn-dependence of the Curie-temperatureT _c of Gd-doped EuO and EuS.     

Electrosorption of hydrogen into palladium-gold alloys

Hydrogen electrosorption into Pd-Au alloys has been studied in acidic solutions (1 M H₂SO₄) using cyclic voltammetry. Pd-Au electrodes with limited volume were prepared by electrochemical co-deposition. It was found that the maximum H/(Pd+Au) ratios decrease monotonically with increasing gold content and reach zero at ca. 70 at% Au. Similarly to the case of Pd limited volume electrodes, two peaks in the hydrogen region, corresponding to two types of sorbed hydrogen, are observed on voltammograms for Pd-rich alloys. The hydrogen capacity, H/(Pd+Au), measured electrochemically, depends on the sweep rate in the cyclic voltammetry experiments, which suggests that two different mechanisms for hydrogen desorption from the Pd-Au alloy are possible. After a strong decrease of Pd concentration at the electrode surface, caused by long cyclic polarization to sufficiently anodic potentials, the amount of absorbed hydrogen is still significant for alloys initially rich in Pd. The results obtained from CO adsorption experiments suggest that only Pd atoms are active in the hydrogen absorption/desorption process. Electronic Publication