Misalignment tolerance analysis and fabrication for highly efficient parallel optical-electrical convertor module

A compact, highly efficient, and passively assembled parallel optical-electrical convertor module (POECM) for active optical cable application is proposed. This paper presents our POECM structure, optical design simulation results, fabrication process, and data transmission test results, in sequence. The POECM has a compact size of \(18.5\hbox {mm} \times 10\hbox {mm} \times 2.8\hbox {mm}\) . We confirm a data rate of total throughput at 21.6 Gbps ( \(5.4\hbox {Gbps} \times 4\) channels) with a bit error rate of less than \(10^{-12}\) .     

New device architecture of a thermoelectric energy conversion for recovering low-quality heat

Low-quality heat is generally discarded for economic reasons; a low-cost energy conversion device considering price per watt, $/W, is required to recover this waste heat. Thin-film based thermoelectric devices could be a superior alternative for this purpose, based on their low material consumption; however, power generated in conventional thermoelectric device architecture is negligible due to the small temperature drop across the thin film. To overcome this challenge, we propose new device architecture, and demonstrate approximately 60 Kelvin temperature differences using a thick polymer nanocomposite. The temperature differences were achieved by separating the thermal path from the electrical path; whereas in conventional device architecture, both electrical charges and thermal energy share same path. We also applied this device to harvest body heat and confirmed its usability as an energy conversion device for recovering low-quality heat.     

Exchange coupled magnetic nanocomposites of Sm(Co1−xFex)5 / Fe3O4 with core/shell structure

Magnetic nanocomposites of Sm(Co_1−xFe_x)₅/Fe₃O₄ (x≈0.1) with the core/shell type structure were successfully fabricated using a two-step polyol process, where as-prepared SmCo_5(1−x) nanoparticles were used as seeds for the ferrite coating. The core/shell composites are quite stable in air and show a typical hysteric behavior of single component, yielding an enhanced coercivity of 2.2 kOe with a saturated magnetization of 130 emu/g at 5 T. The magnetization data clearly reveal the presence of effective exchange coupling between the hard-magnetic Sm(Co_1−xFe_x)₅ core and soft-magnetic Fe₃O₄ shell, suggestive of a single-phase structure rather than a distinctive two-phase one.     

Multiplicity studies and effective energy in ALICE at the LHC

In this work we explore the possibility to perform “effective energy” studies in very high energy collisions at the CERN large hadron collider (LHC). In particular, we focus on the possibility to measure in pp collisions the average charged multiplicity as a function of the effective energy with the ALICE experiment, using its capability to measure the energy of the leading baryons with the zero degree calorimeters. Analyses of this kind have been done at lower centre-of-mass energies and have shown that, once the appropriate kinematic variables are chosen, particle production is characterized by universal properties: no matter the nature of the interacting particles, the final states have identical features. Assuming that this universality picture can be extended to ion–ion collisions, as suggested by recent results from RHIC experiments, a novel approach based on the scaling hypothesis for limiting fragmentation has been used to derive the expected charged event multiplicity in AA interactions at LHC. This leads to scenarios where the multiplicity is significantly lower compared to most of the predictions from the models currently used to describe high energy AA collisions. A mean charged multiplicity of about 1000–2000 per rapidity unit (at η∼0) is expected for the most central Pb–Pb collisions at . In memory of A. Smirnitskiy     

Synthesis methods of multiple phase-cycled SSFP images to reduce the band artifact and noise more reliably

The band artifact in steady-state free precession can be reduced by synthesizing the multiple images obtained through different phase increments of successive radiofrequency pulses. Even though the complex summation method was reported to be effective in reducing the band artifact, it has the pitfalls of intensity abnormality and sensitivity to the phase abnormality. Two new methods have been developed for more reliable reduction of the band artifact than the complex summation method. One method is to sum the complex images partially and to take the maximum intensity of the partially summed images. The other method is to sum the free induction decay (FID) and primary echo components of the Fourier series that are obtained through Fourier analysis of the complex base images. Both proposed methods were compared with other magnitude (maximum intensity projection, spectrally decomposed synthesis, sum-of-squares, nonlinear averaging) and complex-based (complex summation, magnitude-weighted complex summation) methods experimentally at 3 T for the phantom and volunteer's head imaging. Both proposed methods were confirmed to maintain the advantage of the complex summation in reducing both the dark and bright band artifacts while reducing the intensity abnormality and sensitivity to the phase abnormality from that of the complex summation method over a wide range of flip angles and relaxation times.     

Luminescence enhancement of Eu-doped calcium magnesium silicate blue phosphor for UV-LED application

(Ca_1−x,Eu_x)MgSi_2yO_6+δ blue phosphor was prepared by spray pyrolysis and the photoluminescence properties were optimized by controlling concentration of Si element and the activator content. At y=1.0, the concentration quenching in the luminescent intensity appeared when the Eu²⁺ content (x) was 0.01 (1 at%). Such quenching concentration was changed with the concentration of silicon (y), which was increased with an increase in the quantity of excess Si (y>1.0). The highest luminescent intensity was achieved when the Eu²⁺ content (x) and the Si concentration (y) were 0.04 and 1.3, respectively. According to X-ray diffraction (XRD) analysis, the tetragonal SiO₂ phase was formed as a minor phase when the y value was larger than 1.3. The formation of SiO₂ phase, however, did not reduce but increased the luminescent intensity when the Eu²⁺ content was optimized again. As a result, the luminescent intensity of the phosphor particles optimized in the content of both Si and Eu²⁺ was about 150% improved compared with that of the CaMgSi₂O₆:Eu sample (x=0.01, y=1.0).     

Luminescent characteristics of CaTiO3:Pr thin films prepared by pulsed laser deposition method with various substrates

CaTiO₃:Pr³⁺ films were deposited on different substrates such as Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica using pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by XRD and SEM measurements. The films grown on the different substrates have different crystallinity and morphology. The FWHM of (2 0 0) peak are 0.18, 0.25, 0.28, and 0.30 for Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica, respectively. The grain sizes of phosphors grown on different substrates were estimated by using Scherrer's formula and the maximum crystallite size observed for the thin film grown on Al₂O₃ (0 0 0 1). The room temperature PL spectra exhibit only the red emission peak at 613 nm radiated from the transition of (¹D₂ → ³H₄) and the maximum PL intensity for the films grown on the Al₂O₃ (0 0 0 1) is 1.1, 1.4, and 3.7 times higher than that of the CaTiO₃:Pr³⁺ films grown on MgO (1 0 0), Si (1 0 0), and fused Sillica substrates, respectively. The crystallinity, surface morphology and luminescence spectra of thin-film phosphors were highly dependent on substrates.