Deposition of a Continuous and Conformal Copper Seed Layer by a Large-Area Electron Cyclotron Resonance Plasma Source with Embedded Lisitano Antenna

To deposit copper seed layer on ultra large scale integration devices, a large-area (Ø 378 mm) electron cyclotron resonance plasma has been generated by using permanent magnets-embedded Lisitano antenna. The plasma source operates in the pressure range of 0.2–1.5 mTorr with microwave power range of 500–2,000 W. By using a Langmuir probe, the electron density and temperature have been measured near the DC sputter target position. Measurements indicate argon plasmas having electron densities of ~5 × 10¹⁰/cm and electron temperatures of 5 eV with 750 W microwave power at gas pressures of 0.5 mTorr. Using this plasma source and a DC sputter, we obtained excellent conformal copper seed layer with high aspect ratios of 12:1. This is in contrast with conventional methods using magnetron sputter, which has aspect ratios of 2–3:1. Also, improvements are observed in the smoothness (root mean square roughness of 1.345 nm), uniformity (2.5 % at 300 mm wafer), and sidewall symmetricity (more than 95 %) of the copper seed layer.     

Synthesis of new di-anchoring organic sensitizer based on quinoxaline acceptor for dye-sensitized solar cells

New quinoxaline-based organic sensitizer bearing di-anchoring group for dye-sensitized solar cells (DSSCs) was synthesized from diethyl 4,5-diaminophthaltate, in which was prepared under mild condition by using Takehito’s method. The synthesized sensitizer was compared with mono-anchoring sensitizer through absorption spectra, emission spectra, J-V curve, and IPCE spectra, indicating the di-anchoring group leads to a noticeable improvement of J_sc value owing to more efficient intramolecular charge transfer and channel number increment.     

Differential regulation of the histone chaperone HIRA during muscle cell differentiation by a phosphorylation switch

Replication-independent incorporation of variant histone H3.3 has a profound impact on chromatin function and numerous cellular processes, including the differentiation of muscle cells. The histone chaperone HIRA and H3.3 have essential roles in MyoD regulation during myoblast differentiation. However, the precise mechanism that determines the onset of H3.3 deposition in response to differentiation signals is unclear. Here we show that HIRA is phosphorylated by Akt kinase, an important signaling modulator in muscle cells. By generating a phosphospecific antibody, we found that a significant amount of HIRA was phosphorylated in myoblasts. The phosphorylation level of HIRA and the occupancy of phosphorylated protein on muscle genes gradually decreased during cellular differentiation. Remarkably, the forced expression of the phosphomimic form of HIRA resulted in reduced H3.3 deposition and suppressed the activation of muscle genes in myotubes. Our data show that HIRA phosphorylation limits the expression of myogenic genes, while the dephosphorylation of HIRA is required for proficient H3.3 deposition and gene activation, demonstrating that the phosphorylation switch is exploited to modulate HIRA/H3.3-mediated muscle gene regulation during myogenesis.     

Issue Information

An integrated finite element method (FEM) is proposed to simulate incompressible two‐phase flows with surface tension effects, and three different surface tension models are applied to the FEM to investigate spurious currents and temporal stability. A Q2Q1 element is adopted to solve the continuity and Navier–Stokes equations and a Q2‐iso‐Q1 to solve the level set equation. The integrated FEM solves pressure and velocity simultaneously in a strongly coupled manner; the level set function is reinitialized by adopting a direct approach using interfacial geometry information instead of solving a conventional hyperbolic‐type equation. In addition, a consistent continuum surface force (consistent CSF) model is utilized by employing the same basis function for both surface tension and pressure variables to damp out spurious currents and to estimate the accurate pressure distribution. The model is further represented as a semi‐implicit manner to improve temporal stability with an increased time step. In order to verify the accuracy and robustness of the code, the present method is applied to a few benchmark problems of the static bubble and rising bubble with large density and viscosity ratios. The Q2Q1‐integrated FEM coupled with the semi‐implicit consistent CSF demonstrates the significantly reduced spurious currents and improved temporal stability. The numerical results are in good qualitative and quantitative agreements with those of the existing studies. Copyright © 2015 John Wiley & Sons, Ltd.     

Simplifying patterning process of ZnO nanowires by one step development and etching process

We present herein a simple protocol of growing a patterned ZnO nanowire by etching of ZnO seed layer in the tetramethyl ammonium hydroxide (TMAH) solution. The ZnO seed layer was fabricated by sol–gel method using zinc acetate solution and patterned by using photolithographic method. Patterned ZnO seed layer as etched in the TMAH solution, followed by growth of ZnO nanowires by hydrothermal method. Remarkable point of present ZnO seed layer patterning is that development of UV-exposed photoresist and etching of ZnO seed layer is subsequently processed in aqueous TMAH solution without interruption. The grown ZnO nanowires were analyzed using XRD patterns to exhibit high purity and degree of crystallinity, and showed very good pattern fidelity.     

Coumarinyl azoimidazolyl complexes of osmium(II) hydridocarbonyls: spectroscopic and structural characterization,oxidation catalysis,photovoltaic effect and density functional theory computation

Os(II) hydridocarbonyl complexes of coumarinyl azoimidazoles, [Osh(CO)(PPh₃)₂(CZ‐4R‐R′)]^0/+ ( 3 , 4 ) (CZ‐R‐H = 2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole or 1‐alkyl‐2‐(coumarinyl‐6‐azo)‐4‐substituted imidazole), were characterized from spectroscopic data and the single‐crystal X‐ray data for one of the complexes, [Osh(CO)(PPh₃)₂(CZ‐4‐Ph)] ( 3c ) (CZ‐4‐Ph = 2‐(coumarinyl‐6‐azo)‐4‐phenylimidazolate), confirmed the structure. The complexes show higher emission (quantum yield ? = 0.0163–0.16) and longer lifetime (τ = 1.4–10.3 ns) than free ligands (? = 0.0012–0.0185 and τ = 0.685–1.306 ns). Cyclic voltammetry shows quasi‐reversible metal oxidation at 0.67–0.94 V for [Os(III)/Os(II)] and 1.21–1.36 V for [Os(IV)/Os(III)] and subsequent azo reductions (?0.68 to ?0.95 V for [? N?N? ]/[? N N? ]^? and irreversible < ?1.2 V for [? N N? ]^?/[? N? N? ]^2?) of the chelated coumarinyl azoimidazole. The complexes are photostable and show better photovoltaic power conversion efficiency than free ligands. Also, the complexes were used as catalysts for the oxidation of primary/secondary alcohols to aldehydes/ketones using oxidizing agents like N‐methylmorpholine N‐oxide, t‐BuOOH and H₂O₂. Density functional theory computation was carried out from the optimized structures and the data obtained were used to interpret the electronic and photovoltaic properties. Copyright © 2016 John Wiley & Sons, Ltd.