Determination of ultra-trace gold in natural water by graphite furnace atomic absorption spectrophotometry after in situ enrichment with thiol cotton fiber

A simple method of determining ultra-trace Au in natural water was presented by using graphite furnace atomic absorption spectrophotometry (GFAAS) after in situ enrichment with thiol cotton fiber (TCF). The sample solution was adjusted to pH 1.5-2.0 with HCl, then the water sample was passed through a column packed with 0.10-0.20 g TCF and the flow rate was controlled at 20-40 ml min⁻¹. The effects of interferences, such as complexing and oxidizing agents and other elements adsorbed on TCF were overcome by chemical treatments prior to the desorption of Au. The adsorbed Au was adsorbed with 2.0 ml hot acid, then it was extracted with 1.00 ml methyl isobutylketone (MIBK). For a 5 l water sample, the detection limit of Au is 0.02 ng l⁻¹. The relative standard deviation (R.S.D.) for the determination of 1.44 ng l⁻¹ Au was 9.4%.The method was applied to determine ultra-trace Au both in suspended phase and soluble phase in natural water, the concentrations of total Au in natural water samples range from 0.51 to 67.82 ng l⁻¹. The recovery of added 0.50-6.00 ng l⁻¹ Au was 80-95%. The method is useful in prospecting for Au deposits by means of hydrogeochemical methods. The enrichment is carried out in the field, and then the determination of Au is completed later in the laboratory.     

Eigenvalue and stability of singular differential delay systems

The eigenvalue and the stability of singular differential systems with delay are considered. Firstly we investigate some properties of the eigenvalue, then give the exact exponential estimation for the fundamental solution, and finally discuss the necessary and sufficient condition of uniform asymptotic stability.     

Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

D-N交替法与Schwartz交替法的收敛关系分析

This paper has demonstrated that the Schwartz alternating process must converge if D-N alternating process has converged. Its technique is that the overlapping regions in Schwartz alternating process are considered as independent domains, then Schwartz alternating process could be transformed into D-N alter-nating process. Finally the convergence estimation of Schwartz alternating process could be obtained. The results show that its convergence rate is same as that of D-N alternating process.     

Multi-objectives fuzzy models for designing 3D trajectory in horizontal wells

In this paper, multi-objective models for designing 3D trajectory of horizontal wells are developed in a fuzzy environment. Here, the objectives of minimizing the length of the trajectory and the error of entry target point are fuzzy in nature. Some parameters, such as initial value, end value, lower bound and upper bound of the curvature radius, tool-face angle and the are length of each curve section, are also assumed to be vague and imprecise. The impreciseness in the above objectives have been expressed by fuzzy linear membership functions and that in the above parameters by triangular fuzzy numbers. Models have been solved by the fuzzy non-linear programming method based on Zimmermann [1] and Lee and Li [2]. Models are applied to practical design of the horizontal wells. Numerical results illustrate the accuracy and efficiency of the fuzzy models.     

Towards the Exact Minimization of BDDs—An Elitism-Based Distributed Evolutionary Algorithm

Binary Decision Diagrams (BDDs) are the state-of-the-art data structure for representation and manipulation of Boolean functions. In general, exact BDD minimization is NP-complete. For BDD-based technology, a small improvement in the number of nodes often simplifies the follow-up problem tremendously. This paper proposes an elitism-based evolutionary algorithm (EBEA) for BDD minimization. It can efficiently find the optimal orderings of variables for all LGSynth91 benchmark circuits with a known minimum size. Moreover, we develop a distributed model of EBEA, DEBEA, which obtains the best-ever variable orders for almost all benchmarks in the LGSynth91. Experimental results show that DEBEA is able to achieve super-linear performance compared to EBEA for some hard benchmarks.     

Proton-exchanged optical waveguides fabricated by glutaric acid

In this paper, we first report that a new proton source, glutaric acid, has been used to fabricate optical waveguides in Z-cut lithium niobate crystals. The relationship was experimentally established between proton-exchanged (PE) waveguide parameters and fabrication conditions. It is shown that this new organic acid can be used to obtain deep PE waveguides in fast diffusion speed (0.275 μm²/h at 221°C) and with low loss (0.2 dB/cm). It provides an alternative approach for fabricating PE waveguides in lithium niobate substrate.     

斐索型光学合成孔径系统近轴成像条件研究

从几何光学理论出发，详细推导了斐索型光学合成孔径成像系统的近轴非相干成像条件，即子望远系统的角放大率等于系统的线性缩放因子。对于焦平面上的像点而言，合成孔径成像系统可等效为一个带有特殊形状孔径光阑的望远系统，这要求该孔径光栏的开口形状和位置分布与合成孔径成像系统各子系统孔径大小和位置分布相一致。我们由此得到了斐索型合成孔径成像系统的主要约束条件。     

肿瘤微波热疗的温度场预示及热损伤研究

本文将热损伤的产生和影响引入到肿瘤的微波热疗中。运用微波能量比吸收率SAR的分布分析了微波在组织中的传输和吸收过程,并对微波热疗过程中的温度场、热损伤分布以及血液灌注率的变化进行了数值模拟。     

Li(AlxCo1-x)O2晶体中Co3+电子态的变化及对结构演化的影响

研究了应用于锂二次电池正极的新型高能量密度存贮材料Li(AlxCo1-x)O2 (x=01—05)的磁性.发现Al3+的掺杂可导致Co3+中d电子自旋态发生变化，即有部分d电子进入高自旋态.伴随Co3+中电子状态的改变，材料结构演化也发生了相应变化，表现为c/a比增大明显减缓，较好地解释了材料结构对Vegard定律的正偏离.这对材料的微观结构与性能设计具有重要意义. 关键词： 锂电池材料 Li（AlxCo1-x）O2 磁性 自旋态 结构演化