Effect of Carbonized Conditions on Residual Strain and Crystallinity Quality of Heteroepitaxial Growth 3C-SiC Films

Heteroepitaxial growth of SiC on n-Si（111） substrates is performed by a low pressure chemicaJ vapor deposition process. The effects of different carbonized temperature and carbonized time on the crystalline quality and the residual strain of 3C-SiC films are discussed. The results show that the residual strain is obviously reduced and the crystalline quality is greatly improved at the best carbonized temperature of 1000℃ and the carbonized time of 5 min. Under these optimized carbonization conditions, thick epitaxial films of about 15 μm with good crystalline quality and low residual strain can be obtained.     

亚甲基蓝在胶体银表面的吸附——表面增强拉曼光谱和密度泛函理论计算

获得了不同浓度下亚甲基蓝(methylene blue,MB)溶液在银溶胶中的表面增强拉曼光谱。结果表明： 亚甲基蓝分子与银纳米粒子高浓度下物理吸附为主,低浓度下化学吸附为主;不同浓度下存在不同的吸附取向,即高浓度下为“直立”取向,低浓度为“平躺”取向。通过观察低浓度下MB在银胶中吸附时间对谱图的影响,得知低浓度下吸附取向不随时间发生变化。应用密度泛函(DFT)方法在B3LYP/6-31+G*和LANL2DZ基组水平上对亚甲基蓝阳离子(MB+)及MB+与Ag原子形成的不同构型体系进行了结构优化和频率计算。实验与理论计算结果表明,MB+有可能通过N—Ag和S—Ag与Ag原子形成两种较强的吸附构型。电荷布居分析表明,与S原子相比,芳香环上的N原子更易与Ag发生相互作用。还对实验观察到的部分谱峰及它们的振动模式作出了初步归属和讨论。     

Investigation of the energy resolution with a RETGEM detector

A novel Micro-pattern gaseous detector (MPGD), thick GEM with electrodes made of a resistive material (RETGEM) is presented. In this paper we mainly investigate the energy resolution of a RETGEM in Ar+CO_2 with different gas mixtures. The results indicate that an energy resolution 30% in single and double mode can be obtained. The existence of an optimum energy resolution is discussed.     

Security analysis of a multiple pseudorandom-bit generator based on a spatiotemporal chaotic map

<正>In this paper we analyse the security of a multiple pseudorandom-bit generator based on the coupled map lattice and suggest an improved model.Utilizing the error function attack,the multiple pseudorandom-bit generators which can be realized by the three digitization methods are analysed and the effective key spaces are estimated.We suggest an improved multiple pseudorandom-bit generator with 128-bit secret key,and analyse the key sensitivity and statistical properties of the system.     

Effects of strontium and calcium simultaneous substitution on electrical and structural properties of Pb1?x?yCaxSryTiO3 thin films

Ferroelectric Pb_1−x−y Ca _x Sr _y TiO₃ thin films (denoted by PCST90, PCST70, and PCST30) were deposited on the Pt/Ti/SiO₂/Si substrates by a chemical solution deposition method. Their properties were investigated from the viewpoint of crystal structure, microstructure, dielectric, and ferroelectric properties. X-ray diffraction patterns revealed the formation of PCST90, PCST70, and PCST30 thin films without any secondary phases. Infrared and Raman spectroscopy results show that a gradual phase transition from tetragonal to pseudocubic or cubic perovskite structure may occur in PCST thin films with the simultaneous increase of Ca²⁺ and Sr²⁺ contents. Both substitution of isovalent Ca²⁺ and Sr²⁺ at Pb²⁺-site enhanced the dielectric constant and reduced the remnant polarization. In addition, ferroelectric test analyses show that the PCST thin films undergo a ferroelectric-to-paraelectric phase transformation with an amount of Pb²⁺, Ca²⁺, and Sr²⁺ at 30%, 35%, and 35% mol, respectively. Hence, the absence of ferroelectric property may be attributed to a decreasing of the octahedron distortion in the perovskite structure accompanied by a weakening of long-range ferroelectric order.     

Effect of light-curing units on push-out fiber post bond strength in root canal dentin

The purpose of this study was to evaluate the effectiveness of different light-curing units on the bond strength (push-out) of glass fiber posts in the different thirds of the root (cervical, middle and apical) with different adhesive luting resin systems (dual-cure total-etch; dual-cured and self-etch bonding system; and dual-cure self-adhesive cements), Disks of the samples (n = 144) were used, with approximately 1 mm of thickness of 48 bovine roots restored with glass fiber posts, that were luted with resin cements photo-activated by halogen LCU (QTH, Optilux 501) and blue LED (Ultraled), with power densities of 600 and 550 mW/cm², respectively. A universal testing machine (MTS 810 Material Test System) was used with a 1 mm diameter steel rod at cross-head speed of 0.5 mm/min until post extrusion, with load cell of 50 kg, for evaluation of the push-out strength in the different thirds of each sample. The push-out strength values in kgf were converted to MPa and analyzed through Analysis of Variance and Tukey’s test, at significance level of 5%. The results showed that there were no statistical differences between the QTH and LED LCUs. The self-adhesive resin cement had lower values of retention. The total-etch and self-adhesive system resin cements seem to be a possible alternative for glass fiber posts cementation into the radicular canal and the LED LCU can be applied as an alternative to halogen light on photo-activation of dual-cured resin cements.     

Imaging theory of nonlinear second harmonic and third harmonic generations in confocal microscopy

ItisreportedrecentlythatnonlinearopticalphenomenonofSHGandTHGhasbeenobservedinmanybiologicaltissues[16].SHGandTHGhavebeenusedtoperformthethree-dimensionalimaginginlivingtissuesandhaveattractedmuchattentionrecently.TherearemanyadvantagesofusingSHGandTHGtoperformthethree-dimensionalimaginginlivingtissues,suchasnoninvasiveandnophotobleaching,inadditiontotheimagingpropertiesofmulti-photonfluorescenceimaging[7—9].Firstly,unlikeinthesingle-andmulti-photonfluorescenceprocesses,onlyvirtualstat…     

Sr0.6Ba0.2Ca0.2Al2O4 ∶Eu,Dy的制备与长余辉发光性能研究

采用高温固相法制备了Ca,Ba共掺的Sr_0.6Ba_0.2Ca_0.2Al₂O₄ ∶Eu²⁺_0.01, Dy³⁺_0.02和单掺Ba的Sr_0.6Ba_0.4Al₂O₄ ∶Eu²⁺_0.01, 关键词： 长余辉 铝酸锶 稀土掺杂 陷阱能级     

Purification of the recombinant hepatitis B virus core antigen (rHBcAg) produced in the yeast Saccharomyces cerevisiae and comparative observation of its particles by transmission electron microscopy (TEM) and atomic force microscopy (AFM)

Hepatitis B virus core antigen (HBcAg) gene (C gene) was expressed in Saccharomyces cerevisiae and the products (rHBcAg or core particles) were purified from a crude lysate of the yeast by three steps: Sephrose CL-4B chromatography, Sucrose step-gradient ultracentrifugation and CsCl-isopycnic ultracentrifugation. It has been observed that HBcAg was synthesized in yeast cells as a particle consisting of polypeptides with a molecular weight of 21.5 kDa (p21.5). Results of ELISA test and density analysis of CsCl-isopycnic ultracentrifugation indicated that the purified products (rHBcAg particles) with HBcAg antigenicity mainly located at the densities of 1.27 and 1.40 g ml(-1), respectively. Observation and analysis of the purified rHBcAg products by TEM indicated that rHBcAg peptides could mainly self-assemble into two size classes of core particles. The larger particles were approximately 30.1 nm and the smaller were approximately 21.5 nm in mean diameter. Further observation and analysis of the same rHBcAg (core) particles by AFM also indicated that rHBcAg (core) particles were similar to the native HBcAg (core) particles from infected human hepatocytes and mainly composed of two size classes of partides core. The larger particles were approximately 31.3 nm and the smaller were approximately 22.5 nm in mean diameter which was similar to the results obtained by TEM. All results from both TEM and AFM suggested that core particles (capsids) produced in S. cerevisiae possessed dimorphism.