Novel reference gene, High-mobility-group protein I/Y, used in qualitative and real-time quantitative polymerase chain reaction detection of transgenic rapeseed cultivars

With the development of transgenic crops, regulations to label the genetically modified organisms (GMOs) and their derived products have been issued in many countries. Polymerase chain reaction (PCR) methods are thought to be reliable and useful techniques for qualitative and quantitative detection of GMOs. These methods are generally needed to amplify the transgene and compare the amplified results with that of a corresponding reference gene to get the reliable results. Specific primers were developed for the rapeseed (Brassica napus), high-mobility-group protein I/Y(HMG-I/Y) single-copy gene and PCR cycling conditions suitable for the use of this sequence as an endogenous reference gene in both qualitative and quantitative PCR assays. Both methods were assayed with 15 different rapeseed varieties, and identical amplified products were obtained with all of them. No amplification was observed when templates were the DNA samples from the other species of Brassica genus or other species, such as broccoli, stem mustard, cauliflower, Chinese cabbage, cabbage, sprouts, Arabidopsis thaliana, carrot, tobacco, soybean, mung bean, tomato, pepper, eggplant, plum, wheat, maize, barley, rice, lupine, and sunflower. This system was specific for rapeseed. Limits of detection and quantitation in qualitative and quantitative PCR systems were about 13 pg DNA (about 10 haploid genomes) and about 1.3 pg DNA (about 1 haploid genome), respectively. To further test the feasibility of this HMG-I/Y gene as an endogenous reference gene, samples containing transgenic rapeseed GT73 with the inserted glyphosate oxidoreductase (GOX) gene were quantitated. These demonstrated that the endogenous PCR detection systems were applicable to the qualitative and quantitative detection of transgenic rapeseed.     

Preparation of Europium Induced Conformation—specific anti—calmodulin Monoclonal Antibody

Monoclonal antibody technique was employed to detect the conformational difference of CaM induced by metal ions. A trivalent europium ion induced conformation-specific anti-calmodulin monoclonal antibody was successfully prepared with europium-saturated calmodulin as antigen.     

等色染料离子对萃取光度法研究：Ⅰ.溴酚蓝·亚甲蓝体系

研究了溴酚蓝（ＢＰＢ）·亚甲蓝（ＭＢ）等色染料离子对萃取光度测定银、汞和铜的方法。首先将被测金属离子形成［Ｍｅ（ｐｈｅｎ）３］ＢＰＢ的二氯乙烷萃取液，用ＫＣＮ解析并反萃入水相，而后加入和溴酚蓝等色的亚甲蓝溶液继续萃取。由于等色染料离子对和Ｍｅ（ＣＮ）ｎＢＰＢ三元络合物同时进入二氯乙烷中而提高了灵敏度、测定Ａｇ、Ｈｇ和Ｃｕ的摩尔吸光系数均在１０５Ｌ·ｍｏｌ（－１）·ｃｍ（－１）以上。     

Detection of Tumor Necrosis Factor Gene by Piezoelectric Nucleic Acid Senosr

A piezoelectric nucleic acid sensor was constructed ofr detection of tumor necrosis factor gene.Two methods were employed for immobilization of nucleic acid probe on gold electrode of piezoelectric crystal.The results show that polyethyleneimine adbesion and glutaraldehyde cross-linking method has higher sensitivity,stability and selectivity than protein A method.The solid-phase nucleic acid hybridization of oligo unclecotides and tumor necrosis factor target gene sequence were monitorde using this sensor.Tumor necrosis factor gene sequence(580bp) was detected by this nucleic acid sensor for the first time.     

合成香料β-大马酮的高效液相色谱分析

本文提出了用分析型HPLC仪器制备β-大马酮标准品的方法及用HPLC测定β-大马酮含量的方法。制备色谱柱为Zorbax SIL 9.4 mmφ×25cm,流动相为石油醚(30～60℃)/乙醚98.5/1.5。分析用色谱柱为Shim CLC SIL 6 mmφ×15cm(岛津全多孔硅胶柱),流动相为石油醚(60—90℃)/无水乙醇99.88/0.12,检测器为紫外可见分光光度检测器。波长253nm或302nm,标准曲线的线性范围0～1.4mg/ml。峰高或峰面积均可用于测定,回收率100.7%。     

Study of transition metal oxide doped LaGaO3 as electrode materials for LSGM-based solid oxide fuel cells

Transition metal oxide doped lanthanum gallates, La_0.9Sr_0.1Ga_0.8M_0.2O₃ (where M=Co, Mn, Cr, Fe, or V), are studied as mixed ionic-electronic conductors (MIECs) for electrode applications. The electrochemical properties of these materials in air and in H₂ are characterized using impedance spectroscopy, open cell voltage measurement, and gas permeation measurement. Three single cells based on La_0.9Sr_0.1Ga_0.8 Mg_0.2O₃ (LSGM) electrolyte (1.13 to 1.65 mm thick) but with different electrode materials are studied under identical conditions to characterize the effectiveness of the lanthanum gallate-based MIECs for electrode applications. At 800 °C, a single cell using La_0.9Sr_0.1- Ga_0.8Co_0.2O₃ as the cathode and La_0.9Sr_0.1Ga_0.8Mn_0.2O₃ as the anode shows a maximum power density of 88 mW/cm², which is better than that of a cell using Pt as both electrodes (20 mW/cm²) and that of a cell using La_0.6Sr_0.4CoO₃ (LSC) as the cathode and CeO₂-Ni as the anode (61 mW/cm²) under identical conditions. The performance of LSGM-based fuel cells with MIEC electrodes may be further improved by reducing the electrolyte thickness and by optimizing the microstructures of the electrodes through processing. Received: 9 January 1998 / Accepted: 1 May 1998     

双核金属酞菁类化合物催化脱硫机理研究Ⅳ──中心金属离子对MPc－PcM催化活性的影响

实验研究结果表明双核金属酞菁类化合物ＭＰｃ－ＰｃＭ（Ｍ＝Ｖ、Ｃｒ、Ｍｎ、Ｆｅ、Ｃｏ、Ｎｉ、Ｃｕ）是催化Ｈ＿２Ｓ液相氧化反应的良好催化剂，且其催化活性顺序为Ｃｏ＞Ｎｉ＞Ｖ＞Ｆｅ＞Ｃｕ＞Ｃｒ＞Ｍｎ．采用量子化学理论计算方法（ＩＮＤＯ／Ｓ）分析了其前线分子轨道的构成特征，结果表明这几种ＭＰｃ－ＰｃＭ的ＬＵＭＯ轨道皆为有金属离子参与形成的π轨道，但ＨＯＭＯ轨道间的差异却很大．Ｍ＝Ｃｏ、Ｎｉ、Ｃｕ、Ｃｒ时，其ＨＯＭＯ为π轨道；而Ｍ＝Ｆｅ、Ｍｎ时，其ＨＯＭＯ却为σ轨道．正是在前线分子轨道的轨道类型、共轭程度及金属轨道贡献三方面因素的协同作用下，才导致ＭＰｃ－ＰｃＭ的催化活性顺序并非按中心金属离子价电子层ｄ电子数的递变而呈现出规律性的变化．