星载光学系统遮光罩消杂光结构优化设计方法

本文对星载光学系统遮光罩消杂光结构的优化设计做了初步探讨。提出了遮光罩和挡光环消杂光设计的基本原则。给出了一种二级遮光罩结构寸的优化设计方法和一种遮光罩内壁上挡光环位置优化设计方法,并对一级和二级遮光罩进行了初步的分析比较。     

五羟色胺分子选择性电极研究

本应用自己合成的联萘２０－冠－６作为活性载体，进行了五羟色胺分子选择性电极研究。电极在１０＾－＾５－１０＾－＾２ｍｏｌ／Ｌ浓度范围内对五羟色胺具有稳定的线性响应，平均斜率为６３ｍＶ／ＰＣ，检测下限为２．７×１０＾－＾６ｍｏｌ／Ｌ。     

字节全加器及其在无线电测控系统中的应用

对全加器概念进行了推广，并在此基础上给出了使用字节全加器网络的无线电抗干扰算法。通过在实际的无线电测控系统中的应用，结果表明该算法具有良好的无线电抗干扰效果。     

工件带到达时间的两阶段柔性流水作业的近似算法

研究了工件带到时间的两阶段柔性流水作业的排序问题,基于求解流水作业和平行机问题的算法思想,提出两个相应的近似算法H(R)和H(MR(?)),证明了这两个算法的最坏情况性能比分别为3-1/m和2/5-1/m,讨论了界的紧性,并利用数值模拟以分析算法与最优值的近似性能比.     

复制缺陷型人泡沫病毒载体辅助质粒pΔGP的构建及转染小肠癌细胞的研究

在人泡沫病毒原病毒全长克隆pHRSV13的基础上,缺失突变gag和pol基因,并且用SV40polyA加尾信号替代人泡沫病毒的3′LTR,构建辅助质粒pΔGP.将复制缺陷型人泡沫病毒载体质粒pGPSNI EGFP和辅助质粒pΔGP分别转染和共转染小肠癌HIC细胞系,荧光显微镜检测发现共转染pGPSNI EGFP和pΔGP的HIC细胞能够强烈表达绿色荧光蛋白,转染有复制缺陷型人泡沫病毒载体质粒pGPSNI EGFP的HIC细胞能够表达少量的绿色荧光蛋白,而转染有辅助载体pΔGP的HIC细胞不表达绿色荧光.结果证明复制缺陷型人泡沫病毒载体的构建成功,表明人泡沫病毒env基因3′端的内部启动子IP具有弱启动子的活性,并且bel基因产生的调控蛋白能够反式激活人泡沫病毒内部启动子IP和5′LTR的启动子.     

17N+197Au反应中碎片与中子的符合测量

在3?3?.4MeV/u ¹⁷N束轰击¹⁹⁷Au靶产生的反应中,利用放置于不同角度组合的17个中子探测器(4°—83°)和14个半导体望远镜(2.3°—9.0°)对反应产物碎片与中子进行了符合测量.经对所得实验角分布积分得到Z=3—6元素的同位素产额分布.在参加者-旁观者模型框架下,采用¹⁷N原子核内部的不同密度分布计算了同位素产额分布并与实验数据做比较.     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

纳米WO3的制备及其光解水析氧性能研究

用溶胶凝胶法,灼烧法合成了纳米级WO3,采用X-射线衍射、紫外可见漫反射光谱对WO3进行表征.在Fe3 为电子受体、溶液酸度pH为2.0情况下,研究了纳米级WO3在365nm紫外辐射下光解水析氧的光催化活性,并讨论了不同方法制备的催化剂活性差异的原因.结果表明,结晶程度越高、尺寸越小、比表面积越大的纳米级WO3具有更高的光分解水析氧活性,电子受体的浓度、溶液的酸度对析氧活性有明显的影响.     

Interface solution for writing-induced nano-deformation of slider body

Writing-induced nano-deformation of slider body becomes a big concern when the mechanical spacing between the head and disk is continuously reduced to achieve higher magnetic recording areal density. Reduced head–disk spacing increases the risk of head/disk contact and causes the thermal instability in head–disk interface (HDI). This paper reports authors’ efforts towards exploration of interface solutions for writing-induced instability in ultra-low head–disk spacing magnetic system. Multi-shallow step structure with optimized rail position is analyzed and a new femto slider with such structure is explored. The results of numerical simulation indicate that the multi-shallow step structure is an effective approach in reducing the flying height change caused by the writing-induced nano-deformation of the slider body.     

含有五边形—七边形缺陷的单壁纳米碳管的输运性质研究

运用第一性原理的密度泛函理论结合非平衡格林函数研究了含有五边形—七边形拓扑缺陷的纳米碳管异质结的输运性质.结果发现：拓扑缺陷对碳管的输运性质有很大影响；另外，不同类型的碳管形成的异质结的输运性质也有明显的差异. 关键词： 纳米碳管 输运性质 异质结 透射系数