方波激发下Er~(3+)上转换红光激发机理的研究

用方波电源驱动808 nm激光二极管(LD)激发Er3+掺杂的亚碲酸盐氟氧化物玻璃,测量4F9/2能级上转换发光的上升和衰减,根据上升的时间常数确定中间能级的寿命,从而确定4F9/2能级粒子数积累的过程。通过建立速率方程模型分析4F9/2能级的上升和衰减特性与中间能级的关系,确定808 nm LD激发下上转换红光的激发机理,同时提供了一种通过上转换发光,用光电倍增管测量红外能级寿命的方法。     

Regulating Effect of Allicin(Diallyldisulfid-S-Oxide) on Respiration Function of Mitochondria from Beef Heart

To probe into regulating functions of allicin, diallyldisulfid-S-oxide, on electron transport in the inner membrane of mitochondria isolated from beef heart, under the anaerobic, hypoxia, and oxygenating conditions in the presence of rotenone(complex I inhibitor) at 37 °C, we optimized the isolation method for isolating mitochondria from beef heart and used the technique for measuring dissolved oxygen content at the right moment so as to investigate the effects of allicin on the respiratory control of mitochondria in state 4 and state 3, P/O ratio, and respiratory control ratio(RCR). The results show that the optimized isolated requirements were that all the operations were always kept at 0―4 °C, the ratio between sample and isolation medium was 1:4, the filter was a four-layer gauze, two centrifugations in different sections. First section: 2500g, 10 min; second section 7000g, 20 min. The results indicate that the capacity of dissolved oxygen in state 3 was increased and that of dissolved oxygen in state 4 was almost stabilized in mitochondria from beef heart.     

重氮树脂接枝罗丹明B聚合物对酸、碱的响应性

利用重氮树脂(DR)中N2+的光解特性,通过罗丹明(B(RhB))对重氮树脂的接枝反应,得到了染料功能化的接枝聚合物DR-g-RhB,并由傅里叶红外光谱、1H-NMR、紫外-可见吸收光谱和荧光光谱等分析方法确认了产物结构。结果表明DR-g-RhB具有良好的热稳定性,失重5%所对应的温度超过360°C。通过溶液涂敷法形成的薄膜在不同酸碱度溶液中的UV-Vis吸收光谱会随浸入时间产生规律性变化:在pH=7.0的水中,吸光值基本不随时间变化;而在pH=12.0的肼水溶液中,吸光值随时间先下降、再增加;但在酸中则持续增加,而且对盐酸(pH=2.0)的响应比对醋酸(pH=2.3)更灵敏。     

农产品中脱氧雪腐镰刀菌烯醇的表面增强拉曼检测

利用便携式拉曼光谱仪建立了一个快速筛查与检测谷物中真菌毒素脱氧雪腐镰刀菌烯醇(DON)的表面增强拉曼散射(SERS)方法。首先利用实验室前期开发的方法制备了具有高活性的水凝胶SERS芯片。该SERS芯片是将预先制备的高SERS活性的单层碳基点(CDs)包裹的银纳米颗粒团聚体(a-AgNPs/CDs)与聚乙烯醇(PVA)水溶液混合均匀后,再利用循环冷冻-解冻的物理交联法制备而成的。实验优化了影响水凝胶SERS芯片对DON的SERS响应的实验条件,包括溶剂、浸泡温度和浸泡时间。在最佳的SERS检测条件下(溶剂为水-乙醇(1:1, v/v),浸泡温度为40 ℃,浸泡时间为5 min), DON的线性响应范围为1~10000 μg/kg(相关系数(R²)=0.9967),检出限(LOD)为0.14 μg/kg,表明该SERS基底具有较高的灵敏度。得益于水凝胶特殊的孔径结构,实际样品基质中常见的糖、蛋白质、油脂、色素等干扰物质都被阻隔在水凝胶外。因此,在复杂样品检测中仅需要简单的提取,而不需要复杂的分离处理。将该方法用于小麦粉中DON的检测,所得回收率为97.3%~103%,相对标准偏差为4.2%~5.0%。实验结果表明所建立的检测DON的SERS方法具有响应范围宽、灵敏度高、重复性好、响应迅速、操作简单、抗干扰能力强等优点,这说明本实验室所构建的水凝胶SERS芯片在粮食中生物毒素的快速筛查与检测方面具有良好的应用潜力。     

Polyamide Nanofiltration Membrane from Surfactant-assembly Regulated Interfacial Polymerization of 2-Methylpiperazine for Divalent Cations Removal

Removal of metal ions from water can not only alleviate the scaling problem of domestic and industrial water, but also solve the water safety problem caused by heavy metal ion pollution. Here, we fabricate a positively charged nanofiltration membrane via surfactant-assembly regulated interfacial polymerization(SARIP) of 2-methylpiperazine(MPIP) and trimesoyl chloride(TMC). Due to the existence of methyl substituent, MPIP has lower reactive activity than piperazine(PIP) but stronger affinity to hexane, resulting in a nanofiltration(NF) membrane with an opposite surface charge and a loose polyamide active layer. Interestingly, with the help of sodium dodecyl sulfate(SDS) assembly at the water/hexane, the reactivity between MPIP and TMC was obviously increased and caused in turn the formation of a positively charged polyamide active layer with a smaller pore size, as well as with a narrower pore size distribution. The resulting membrane shows a highly efficient removal of divalent cations from water, of which the rejections of MgCl₂, CoCl₂ and NiCl₂ are higher than 98.8%, 98.0% and 98.0%, respectively, which are better than those of most of other positively charged NF membranes reported in literatures.     

基于柠檬酸的石墨烯量子点的制备及其应用

石墨烯量子点（GQDs）是一种新型碳基准零维材料,不但具有石墨烯的独特平面结构,同时具备碳点的量子限制效应和边界效应。GQDs具有独特的光学性质、低毒性、高荧光稳定性和高生物相容性,被广泛应用于检测、传感、催化、细胞成像、药物递送和污染治理等领域。GQDs的合成分为自上而下法和自下而上法,前者将大尺寸的石墨烯、石墨、碳材料切割成纳米级的量子点,后者使用不同的前驱体,通过水热法、热裂解法等方法合成石墨烯量子点。柠檬酸（CA）是一种重要的有机酸,室温下是白色结晶状粉末,是自下而上法合成GQDs的一种常用前驱体,近年来有许多关于以CA为前驱体合成不同GQDs的研究,以CA为前驱体合成的GQDs（CA-GQDs）在生物医药、荧光检测、成像等领域均有应用,具有较好的应用前景。对近年来基于CA的合成方法和具体应用进行了总结和回顾,旨在将现有CA-GQDs的相关成果尽可能汇总和展现,以对相关领域研究工作者提供一定参考,并对未来CA-GQDs较有前景的研究方向进行了展望。     

三维还原氧化石墨烯/β-环糊精复合物的合成及其电化学检测水中左氧氟沙星北大核心CSCD

成功构筑了β-环糊精修饰的三维还原氧化石墨烯复合材料(3D-rGO/β-CD),并对该复合材料进行扫描电子显微镜、傅里叶红外光谱、热重分析和拉曼光谱分析等一系列的表征,分析了其形貌和结构的特征。进一步将其修饰到玻碳电极(GCE)表面,构建了一种新型电化学传感器(3D-rGO/β-CD/GCE)。利用3D-rGO/β-CD/GCE电化学传感器,通过微分脉冲伏安法(DPV)对左氧氟沙星(LEV)进行了检测。其中,具有多孔结构的三维还原氧化石墨烯具有优异的导电性能、比表面积大、化学稳定性好等优良的性质,而修饰的β-环糊精能在其环形腔内与客体分子结合形成超分子包合物,进而可以对LEV进行有效识别。研究结果显示,在最优实验条件下,3D-rGO/β-CD/GCE对左氧氟沙星的检测具有较宽的线性范围(1~150μmol/L),且检测限可达0.33μmol/L,同时该修饰电极还表现出良好的选择性和稳定性。此外,成功将其应用于实际水样中LEV的检测,表明该传感器具有一定的应用潜力。     

有机化学教学中的“三融合、二反思、四进阶”创新教学模式*

为培养出新时代创新人才,构建的“三融合、二反思、四进阶”教学模式有效提升了学生们科技创新能力。依据有机化学特点,创设科学发现情境,通过核心知识点网融合(挑战度)、理论实践交叉融合(高阶性)和化学思政融合(课程思政)“三融合”策略,不断激发学生们学习兴趣;通过教师反思、学生反思的“二反思”过程不断优化教学过程,改善教学效果;最终使具有不同知识层次的学生通过“四进阶”教学策略逐步提升科创能力(创新性)。     

“四模块”嵌入下的混合式教学设计与实践*——以功能材料专业物理化学基础课程为例

为建设适应新时代要求,突出高阶性、创新性、挑战度的一流本科课程,实现价值引领、能力培养和知识传授的教育教学目标,结合功能材料专业的特点和民族高等院校学生的学情,构建了物理化学基础课程的“四模块、三阶段、两时空、双平台”的混合式教学新模式,重塑了“价值引领模块、基础理论模块、多学科融合模块和虚拟仿真实验模块”的“四模块”内容体系。通过“四模块”嵌入下的混合式教学实践研究,结合学生的课前、课中、课后等学习成绩,多维度评价学习效果,并藉由调查问卷来分析学生对混合式教学的评价,最终研究结果表明学生的个性化自主学习能力有了显著提高、学生运用物理化学理论解决复杂问题的综合能力得到了提升,学生经过刻苦学习获得了素质提高的成就感。     

Structure and Performance Modulation of Self-Adhesive SIS/C5 Electrospun Membranes for Transdermal Drug Delivery北大核心CSCD

Electrospun membranes are widely utilized to enhance the water vapor permeability and drug delivery performance of transdermal drug delivery patches. Due to the lack of adhesion property,however,most of them cannot closely contact with skin,which impedes the delivery of drugs to the skin,thus affecting the transdermal administration. C5 resin is used to endow poly（styrene isoprene styrene）（SIS）electrospun membranes with pressure-sensitive adhesion property. Investigation is performed on how to control the structure,adhesion properties and drug delivery performance of SIS/C5 electrospun membranes loaded with synthetic capsaicin via compositions,drugs and electrospinning conditions. The results demonstrate that the electrospun membrane with a SIS/C5 ratio of 2∶1 has excellent water vapor permeability（7. 17×10－3 g/（h·cm2）and adhesion properties（180（°）peel strength is 0. 2 kN/m,tack force is 0. 64 N/cm2 ,holding power is greater than 7 days）. The synthetic capsaicin has good compatibility with the SIS/C5 electrospun membranes,in which no drug crystallizes and the drug loading is beneficial to improve the water vapor permeability. As the drug loading is 8%,the tack force is 0. 6～0. 8 N/cm2 ,the 180（°）peel strength is 0. 2～0. 3 kN/m,the holding power is greater than 7 days,and no residue is left during peeling tests. In vitro drug release indicates that the drug has a behavior of sustained release with a 24-hour cumulative release rate of greater than 50% for all SIS/ C5 electrospun membranes,meeting the requirements of transdermal drug delivery patches. © 2022, Science Press (China). All rights reserved.