Nitric acid oxidation on carbon dispersion and suspension stability

In this study, we have investigated the effect of nitric acid oxidation on the dispersion and suspension stability of activated carbon powder. We treated activated carbon powder with nitric acid at different concentrations. We measured the content of functional groups, the zeta potential and the powder particle size of the activated carbon powder with the Boehm titration, Fourier transform infrared spectroscopy, a zeta potential analyzer, and scanning electron microscopy. The results show that with the increase of nitric acid molar concentration, the content of acid functional groups increased, whereas the content of alkali functional groups decreased. At a nitric acid concentration of 10 mol/l, the surface‐modified activated carbon powder displays features such as the highest functional group content and zeta potential value, the smallest particle size, and the best dispersion and suspension stability in the solution. Copyright © 2008 John Wiley & Sons, Ltd.     

以水热法合成的水合氧化锆为载体的Pt／WO3-ZrO2上的正己烷异构化

通过水热法合成了一系列水合氧化锆,以之为载体采用浸渍法制备了Pt/WO3-ZrO2催化剂,考察了氢氧化锆的水热温度对Pt/WO3-ZrO2异构化活性的影响.通过X射线衍射、NH3程序升温脱附及H2程序升温还原表征了样品的晶相结构、酸性及还原性能.结果表明,水合氧化锆及以此为载体的催化剂的晶相结构均随着氢氧化锆水热温度的变化而变化,水热温度升高,四方相氧化锆比例下降.具有一定晶相结构的水合氧化锆为载体的催化剂具有较无定形氢氧化锆为载体的催化剂更多的强酸中心和更高的异构化催化活性.高的异构化活性可能与催化剂上更多的强酸中心有关。     

Two-photon spectroscopic behaviors and photodynamic effect on the BEL-7402 cancer cells of the new chlorophyll photosensitizer

The spectroscopic properties of a new chlorophyll derivate photosensitizer(CDP) are studied under the excitation wavelengths at 800 and 400 nm using femtosecond pulses from a Ti:sapphire laser.The damaging effect of CDP on the BEL-7402 cancer cells is also investigated upon two-photon illumination at 800 nm.The normalized fluorescence spectra of CDP in tetrahydrofuran(THF) show that two-photon and one-photon spectra have the same distributions and the same emission bands(675 nm).The life-times of two-and one-photon induced fluorescence of this molecule are of the order of 5.0 ns.By comparing the data it is shown that there is some difference between the two lifetimes,but the differ-ence is less than one nanosecond.The two-photon absorption cross section of the molecule is also measured at 800 nm and estimated as about σ′2 ≈ 31.5×10-50 cm4·s·photon-1.The results of two-photon photodynamic therapy(TPPDT) tests show that CDP can kill all of the tested cancer cells according to the usual Eosine assessment.Our results indicate that the two-photon-induced photophysical,photo-chemical and photosensitizing processes of CDP may be basically similar to those of one-photon ex-citation.These behaviors of the sample suggest that one may find other possible methods to estimate some photosensitizers' effects in details such as their distribution in cells and the reactive targets of the sub-cellular parts of some tumor cells via two-photon excitation techniques.     

Sonochemical Preparation of Micro- and Nanometer Cu2O

Cu2O particles with different morphologies and scales were prepared sonochemically on the solid-liquid interface of CuCl and water, by adjusting the reaction factors. The products were characterized by powder X-ray diffraction（XRD） and scanning electron microscopy（SEM）. The formation and morphology of Cu2O crystals were influenced by high-intensity ultrasound, reaction temperature, and addition of CuCl. The results indicate that micrometer Cu2O was crystallized in cubic and octahedral shapes, whereas, nanometer Cu2O was not produced in well-shaped crystals.     

LiInS_2多晶原料的合成与性能(英文)

本文研究了高纯LiInS2多晶原料的合成及性能。LiInS2晶体是一种极具吸引力的晶体,可以应用于红外区域的非线性光学频率变换。一般来说,含锂硫族化合物制备非常困难,因为锂极易被氧化,且腐蚀石英管。而且,硫族元素高的蒸气压会导致石英安瓿爆炸。本文采用两种方法合成了LiInS2多晶原料,对所获LiInS2多晶原料进行了X射线粉末衍射和差示扫描量热分析。     

共蒸发三步法制备CIGS薄膜的相变过程

本文采用共蒸发三步法沉积Cu(In,Ga) Se2 (CIGS)薄膜,其中关于Cu化合物的相转变过程是制约吸收层质量的关键.本文详细研究了三步法工艺中吸收层由贫Cu薄膜向富Cu薄膜转变的相变过程,通过X射线衍射仪(XRD)、X射线荧光光谱仪(XRF)及扫描电镜(SEM)结合的方法总结出三步法工艺的相变过程.     

50Hz铌酸锂电光调Q开关

目前军用领域电光调Q开关的工作频率基本在30 Hz以下,为满足军用领域对更高重复频率脉冲激光的需求,研究并获得了可工作在50 Hz重复频率下的铌酸锂电光调Q开关.基于折射率椭球理论,通过分析铌酸锂晶体预偏置电光调Q的原理,选取了合适的预偏置角度.在闪光灯泵浦Ce∶ Nd∶ YAG激光系统中,通过合理设计谐振腔参数以及激光晶体的参数,采用预偏置加压式电光调Q方式,实现了频率为50 Hz,脉宽约为6 ns,能量不小于93mJ的1.06 μm激光输出,峰值功率达到了约15 MW.试验证明铌酸锂晶体用作电光调Q开关在中小功率和中低频率1.06μm激光上有很好的应用前景.     

醇-水体系中pH值和焙烧温度对合成MgO纳米片晶体性质的影响

采用液相法,在醇-水体系中,以Mg(NO3)2·6H2O为镁源、PEG-2000为表面活性剂、NH3·H2O为沉淀剂,研究了pH值和焙烧温度对制备MgO纳米片晶体性质的影响.采用XRD、SEM和BET等手段对MgO纳米片晶相组成、微观形貌、孔结构进行分析表征.研究结果表明,pH值和焙烧温度对MgO纳米片晶相组成没有影响,但对样品微观形貌和比表面积影响较大.较低的pH值和焙烧温度或者较高的pH值和焙烧温度均会导致样品形状不规则,出现不同程度团聚,比表面积较小.在pH=10、焙烧温度500℃条件下制得MgO纳米片形状规整、分散性较好,比表面积、孔容和平均孔径分别为145.42 m2·g-1、0.67 mL·g-1和18.56 nm.     

单桩竖向动力阻抗计算模型研究

运用土动力学和结构动力学原理,同时考虑桩周土的弱化效应和桩-土界面的相对滑移效应,利用数理方程方法分别求解单桩与桩周近场土域及远场土域的振动方程,建立了竖向荷载作用下单桩动力阻抗函数的简化计算方法,提出了一种改进的非线性动力Winkler模型,确定了模型中各物理元件的参数,进而通过对比分析验证了计算模型的合理性,从而为桩-土-上部结构耦合系统的非线性分析奠定了基础。     

N330炭黑增强天然橡胶材料力学性能的实验研究

为了研究炭黑对橡胶材料力学性能的影响,对9种不同体积含量的炭黑填充橡胶材料进行了准静态力学实验研究。利用循环拉伸加卸载实验分析了炭黑对橡胶Mullins效应及能量损耗的影响,通过单轴拉伸实验研究了炭黑对橡胶材料刚度和起始模量的影响,采用多步松弛拉伸加卸载实验研究了炭黑对橡胶材料应力行为的应变历史相关性的影响。实验结果表明:炭黑填充量越高,橡胶材料的刚度越大,初始模量越大,Mullins效应也越明显;随着炭黑填充量的增加,橡胶在加卸载循环中所产生的迟滞损耗、Mullins效应相对能量损耗以及残余应变都呈现出非线性增长趋势;随着炭黑填充量的升高,橡胶在加卸载过程中的应力松弛现象越明显,其平衡态迟滞损耗以及与时间相关部分的迟滞损耗也越大。