啁啾相移光纤光栅分布式应变与应变点精确定位传感研究

利用啁啾相移光纤光栅狭缝的中心波长对应变点和应变量的波长敏感性,实现应变与应变点精确定位的传感.当啁啾光纤光栅上的某一位置产生微应变时,该应变点会产生相移,其频谱则会出现一个与之对应的狭缝,且狭缝的深度和中心波长与应变的大小和位置相关.当串接不同中心波长的啁啾光纤光栅后,即可实现一定范围内的分布式应变与应变点精确定位检测.本文通过V-I传输矩阵法建立了狭缝深度和中心波长关于应变量和应变位置的理论模型,分析结果表明理论上可以实现微米量级的精确定位.搭建了级联啁啾相移光纤光栅的分布式应变传感装置,实验获得的最大应变灵敏度为0.19 pm/με.该精确定位传感装置在先进制造、精密加工、航空航天、铁路系统等高新技术领域具有重要的应用前景.     

GESFIDE-PROPELLER Approach for Simultaneous R2 and R2* Measurements in the Abdomen

Purpose

To investigate the feasibility of combining GESFIDE with PROPELLER sampling approaches for simultaneous abdominal R2 and R2* mapping.

Materials and Methods

R2 and R2* measurements were performed in 9 healthy volunteers and phantoms using the GESFIDE-PROPELLER and the conventional Cartesian-sampling GESFIDE approaches.

Results

Images acquired with the GESFIDE-PROPELLER sequence effectively mitigated the respiratory motion artifacts, which were clearly evident in the images acquired using the conventional GESFIDE approach. There was no significant difference between GESFIDE-PROPELLER and reference MGRE R2* measurements (p = 0.162) whereas the Cartesian-sampling based GESFIDE methods significantly overestimated R2* values compared to MGRE measurements (p < 0.001).

Conclusion

The GESFIDE-PROPELLER sequence provided high quality images and accurate abdominal R2 and R2* maps while avoiding the motion artifacts common to the conventional Cartesian-sampling GESFIDE approaches.     

Chemical composition and magnetism of Ag doped LaMnO3

By using a sol-gel clue, a set of polycrystalline perovskite samples La$_{1 - x}$Ag$_{x}$MnO$_{3}$ with a nominal doping level $x$ ranging from 0.05 to 0.45 has been synthesized. The chemical composition and the magnetism of the samples were investigated. A little Ag was found seeping from the samples in the sintering process when the doping level exceeded 0.05 and the sintering temperature was higher than 700\du\, resulting in the samples being in multiphase. The magnetic transition points of the samples have been found to decrease with increasing sintering temperature. A concentration-dependent $T_{\rm c}$ similar to that of bivalent metal ion doped perovskite, has been obtained. We believe that the Ag seeping in the sintering process is responsible for those magnetic characteristics.     

A global design of high power Nd-Yb co-doped fiber lasers

A global optimization method - niche hybrid genetic algorithm (NHGA) based on fitness sharing and elite replacement is applied to optimize Nd³⁺-Yb³⁺ co-doped fiber lasers (NYDFLs) for obtaining maximum signal output power. With a objective function and different pumping powers, five critical parameters (the fiber length, L; the proportion of pump power for pumping Nd³⁺, η; Nd³⁺ and Yb³⁺ concentrations, N_Nd and N_Yb and output mirror reflectivity, R_out) of the given NYDFLs are optimized by solving the rate and power propagation equations. Results show that dividing equally the input pump power among 808 nm (Nd³⁺) and 940 nm (Yb³⁺) is not an optimal choice and the pump power of Nd³⁺ ions should be kept around 10-13.78% of the total pump power. Three optimal schemes are obtained by NHGA and the highest slope efficiency of the laser is able to reach 80.1%.     

A Novel Highly Sensitive and Selective Fluorescent Sensor for Imaging Copper (II) in Living Cells

In this work, we designed and synthesized a novel quinolin-based derivative which exhibited signaling behaviors for Cu²⁺. Upon the addition of Cu²⁺ to the solution of the molecule, it displayed an obvious fluorescence quenching in a linear fashion due to the formation of a 1:1 metal–ligand complex. This fluorescent sensor exhibited a rare sensitivity toward Cu(II) (the level of magnitude could be 6?×?10^?8), a rapid response (<10 s) and also high selectivity toward Cu²⁺ over other metal ions such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Fe³⁺, Mn²⁺, Hg²⁺, Pb²⁺, Cd²⁺, Cr³⁺, Co²⁺, Zn²⁺ and Al³⁺. Simultaneously, the cell imaging experiments and filter paper test demonstrated its extensive applicability.     

铁、铬、钒原子激发态的光电离截面

这篇文章分别在278～288nm、335～361nm、300～310nm激光波长范围内分别报道过渡金属中的铁原子、铬原子和钒原子的共振增强多光子电离(REMPI)的实验结果.实验中采用激光烧蚀和分子束相结合的技术制备金属原子.光离子产物由飞行时间质谱仪检测.根据共振电离离子信号对探测激光功率的依赖关系,得到原子激发态的光电离截面值.     

The study of energy bands in nucleus ~(102)Zr

Theoretical calculations of the energy bands in nucleus 102 Zr are carried out by taking the projected shell model approach, which has reproduced the experimental data. In addition, by analyzing band-head energies, corresponding configurations of yrast band, quasi-particle rotational bands and side bands, we have worked out the microscopic formation mechanism of axially symmetric deformation bands: The low-excitation deformation bands are attributed to the high-j intruder states 1g 7/2 and 1h 11/2 in the N=...     

Bulk工艺气体微网探测器的研究

In this paper, we present a study of a micromegas detector prototype built with bulk technology. Following a short discussion of the micromegas detector＇s structure and working mechanism, the bulk fabrication process is described, and some testing results of the prototype are presented.     

N掺杂TiO_2纳米管阵列的制备与性质研究

本文采用阳极氧化法制备了孔径为60-80nm,孔壁厚约为20-30nm的高有序度TiO2纳米管。将制备的TiO2纳米管经表面酸化后在浓氨水中浸泡,并于氮气气氛中进行退火处理,以实现TiO2纳米管的N掺杂。利用SEM、XRD、Raman和XPS对样品的形貌与结构进行了研究。结果显示,掺N后不会破坏阳极氧化形成的高有序纳度米管阵列,而且N的引入促进了TiO2纳米管在低温下由锐钛矿相向金红石相的转变。N掺杂样品的XPS中出现了结合能位于399.7 eV的峰,该峰来源于TiO2的间隙氮杂质,显示此方法在TiO2纳米管中实现了有效的N的掺杂。     

微波消解ICP-AES测定黑番茄中的17种微量元素

采用微波消解法对样品进行处理,以电感耦合等离子体-原子发射光谱法(ICP-AES)测定黑番茄中17种微量元素的含量。方法的回收率在93.0%—105.8%之间,相对标准偏差小于2.608%。实验证明,黑番茄含有丰富的对人体有益微量元素,是一种健康食品。