Dramatic specific-ion effect in supramolecular hydrogels

We report on a pronounced specific-ion effect on the intermolecular and chiral organization, supramolecular structure formation, and resulting materials properties for a series of low molecular weight peptide-based hydrogelators, observed in the presence of simple inorganic salts. This effect was demonstrated using aromatic short peptide amphiphiles, based on fluorenylmethoxycarbonyl (Fmoc). Gel-phase materials were formed due to molecular self-assembly, driven by a combination of hydrogen bonding and π-stacking interactions. Pronounced morphological changes were observed by atomic force microscopy (AFM) for Fmoc-YL peptide, ranging from dense fibrous networks to spherical aggregates, depending on the type of anions present. The gels formed had variable mechanical properties, with G'?values between 0.8?kPa and 2.4?kPa as determined by rheometry. Spectroscopic analysis provided insights into the differential mode of self-assembly, which was found to be dictated by the hydrophobic interactions of the fluorenyl component, with comparable H-bonding patterns observed in each case. The efficiency of the anions in promoting the hydrophobic interactions and thereby self-assembly was found to be consistent with the Hofmeister anion sequence. Similar effects were observed with other hydrophobic peptides, Fmoc-VL and Fmoc-LL. The effect was found to be less pronounced for a less hydrophobic peptide, Fmoc-AA. To get more insights into the molecular mechanism, the effect of anions on sol-gel equilibrium was investigated, which indicates the observed changes result from the specific-ion effects on gels structure, rather than on the sol-gel equilibrium. Thus, we demonstrate that, by simply changing the ionic environment, structurally diverse materials can be accessed providing an important design consideration in nanofabrication via molecular self-assembly.     

Investigation of formally zerovalent Triphos iron complexes

The reduction of Triphos [PhP(CH(2)CH(2)PPh(2))(2)] iron halide complexes has been explored, yielding formally zerovalent (κ(3)-Triphos)Fe(κ(2)-Triphos) and (κ(3)-Triphos)Fe(κ(2)-Bpy). Electrochemical analysis, coupled with the metrical parameters of (κ(3)-Triphos)Fe(κ(2)-Bpy), reveal an electronic structure consistent with a π-radical monoanion bipyridine chelate that is antiferromagnetically coupled to a low spin, Fe(i) metal center.     

Rapid mass-spectrometric determination of boron isotopic distribution in boron carbide

Boron isotopic ratios are measured in boron carbide by thermionic ionization mass spectrometry with no prior chemical separation. A powder blend of boron carbide and sodium hydroxide is prepared, a small portion is transferred to a tantalum filament, the filament is heated to produce sodium borate, and the filament is transferred to the mass spectrometer where the(11)B/(10)B ratio is measured, using the Na(2)BO(2)(+) ion. Variables investigated for their effect on preferential volatilization of (10)B include the sodium hydroxide-boron carbide ratio and the temperature and duration of filament heating. A series of boron carbide pellets containing natural boron, of the type proposed for the control rods of the Fast Flux Test Facility reactor, were analysed with an apparently unbiased result of 4.0560 for the (11)B/(10)B ratio (standard deviation 0.0087). The pellets contained over 3% metal impurities typically found in this material. Time of analysis is 45 min per sample, with one analyst.     

Unsteady-state transfer of impurities during crystal growth of sucrose in sugarcane solutions

In this work, we present growth rate data of sucrose crystals in the presence of impurities that can be used by both sugar technologists and crystal growth scientists. Growth rate curves measured in a pilot-scale evaporative crystallizer suggest a period of slow growth that follows the seeding of crystals into supersaturated technical solutions. The observed trend was enhanced by adding typical sugarcane impurities such as starch, fructose or dextran to the industrial syrups. Maximum growth rates of sucrose resulted at intermediate rather than high supersaturation levels in the presence of the additives. The effects of the additives on the sucrose solubility and sucrose mass transfer in solution were taken into account to explain the observed crystal growth kinetics. A novel mechanism was identified of unsteady-state adsorption of impurities at the crystal surface and their gradual replacement by the crystallizing solute towards the equilibrium occupation of the active sites for growth. Specifically designed crystallization experiments at controlled supersaturation confirmed this mechanism by showing increasing crystal growth rates with time until reaching a steady-state value for a given supersaturation level and impurity content.     

Synthesis and characterization of novel pyrene-dendronized porphyrins exhibiting efficient fluorescence resonance energy transfer: optical and photophysical properties

A novel series of pyrene dendronized porphyrins bearing two and four pyrenyl groups (Py(2)-TMEG1 and Py(4)-TMEG2) were successfully synthesized. First and second generation Fréchet type dendrons (Py(2)-G1OH and Py(4)-G2OH) were prepared from 1-pyrenylbutanol and 3,5-dihydroxybenzyl alcohol. These compounds were further linked to a trimesitylphenylporphyrin containing a butyric acid spacer via an esterification reaction to obtain the desired products. Dendrons and dendronized porphyrins were fully characterized by FTIR and (1)H NMR spectroscopy and their molecular weights were determined by matrix-assisted laser desorption ionization time of flight mass spectrometry. Their optical and photophysical properties were studied by absorption and fluorescence spectroscopies. The formation of dynamic excimers was detected in the pyrene-labeled dendrons, with more excimer being produced in the higher generation dendron. The fluorescence spectra of the pyrene dendronized porphyrins exhibited a significant decrease in the amount of pyrene monomer and excimer emission, jointly with the appearance of a new emission band at 661 nm characteristic of porphyrin emission, an indication that fluorescence resonance energy transfer (FRET) occurred from one of the excited pyrene species to the porphyrin. The FRET efficiency was found to be almost quantitative ranging between 97% and 99% depending on the construct. Model Free analysis of the fluorescence decays acquired with the pyrene monomer, excimer, and porphyrin core established that only residual pyrene excimer formation in the dendrons could occur before FRET from the excited pyrene monomer to the ground-state porphyrin core.     

Baryon pairs production ine + e − annihilation at\sqrt s = 2.4 GeV

Search for baryon pairs production ine ⁺ e ^? annihilation at \(\sqrt s = 2386 MeV\) is reported. The data relate to a luminosity of 161 nb^?1 collected by the DM2 experiment at DCI, the Orsay colliding ring. First measurements of directe ⁺ e ^? annihilation into \(\Lambda \bar \Lambda \) and ofe ⁺ e ^?→ \(p\bar p\) at this energy are presented. First observation of a goode ⁺ e ^?→ \(n\bar n\) candidate is reported and upper limits are given fore ⁺ e ^?→ \(n\bar n, \Lambda \bar \sum ^0 + c.c.\) and \(\Sigma ^0 \bar \Sigma ^0 \) .     

Partial cellulose acetylation in 1-ethyl-3-methylimidazolium acetate induced by dichloromethane

Cellulose acetate (CA) is one on the most important cellulose derivatives. The use of ionic liquids in cellulose processing was recently discovered to not exclusively act as a solvent but also as a reagent. Recent studies showed that bulky chlorides as well as acetyl chloride mixed with ionic liquids can facilitate cellulose acetylation. This work focused on a simple chloro-organic cosolvent, dichloromethane (DCM), and showed the ability of this relatively small molecule, mixed with the ionic liquid, to facilitate homogenous acetylation by displacement of the acetate ion of the ionic liquid with a chloride ion. Maximal acetylation achieved by this method was a degree of substitution (DS) of 1.9, were only a small fraction of DCM was utilized for acetylation, well below even that expected for equimolar reaction. The degree of substitution was controlled by the dichloromethane content, thus controlling its solubility in water. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2458–2462     

Rotating,Stationary, Axially Symmetric Spacetimes with Collisionless Matter

The existence of stationary solutions to the Einstein–Vlasov system which are axially symmetric and have non-zero total angular momentum is shown. This provides mathematical models for rotating, general relativistic and asymptotically flat non-vacuum spacetimes. If angular momentum is allowed to be non-zero, the system of equations to solve contains one semilinear elliptic equation which is singular on the axis of rotation. This can be handled very efficiently by recasting the equation as one for an axisymmetric unknown on ${\mathbb{R}^5}$ .     

Determination of the flammability properties of polymeric materials: A novel method

Standard flammability tests, like the Cone Calorimeter, were developed several decades ago and provided sufficient flammability data for the purposes of the time. However, recent pyrolysis models have revealed the limitations of the standard test in providing adequate data for current flammability analysis and modelling. This paper reviews the assumptions in the standard test and proposes a novel sample holder for the cone calorimeter which incorporates a large block of aluminium at the rear face of the sample under test. This allows the heat losses at the rear face of the sample to be measured precisely and enables more accurate calculation of the material flammability properties. Tests of PA6 and a nano-composite of PA6 & Cloisite 30B, carried out using the standard and new sample holders, are presented and discussed. The peak of high heat release rate observed in standard tests of PA6 is not observed using the novel sample holder, where the burning behaviour of PA6 and the nano-composite material are largely similar. The implications of these observations are discussed.     

Electroaddressing agarose using Fmoc-phenylalanine as a temporary scaffold

Electroaddressing, the use of imposed electrical stimuli to guide assembly, is attractive because electrical stimuli can be conveniently applied with high spatial and temporal resolution. Several electroaddressing mechanisms have been reported in which electrode-induced pH gradients trigger stimuli-responsive materials to undergo localized sol-gel transitions to form hydrogel matrices. A common feature of existing hydrogel electrodeposition mechanisms is that the deposited matrix retains residual charged, acidic, or basic (macro)molecules. Here, we report that pH-responsive fluorenyl-9-methoxycarbonyl-phenylalanine (Fmoc-Phe) can be used to codeposit the neutral and thermally responsive polysaccharide agarose. Upon cooling, an agarose network is generated and Fmoc-Phe can be removed. The Fmoc-Phe-mediated codeposition of agarose is simple, rapid, spatially selective, and allows for the electroaddressing of a bioactive matrix.