海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.     

基于后向散射模型的蒸汽湿度测量及仿真

为了更加准确地测量出汽轮机末级蒸汽湿度,为锅炉给水量提供依据,促进汽轮机内部除湿技术的发展,采用了后向角散射法的思路设计了湿蒸汽参数测量模型,并对模型所需物理量进行了详细的计算,为后向散射法测量蒸汽湿度的研究提供参考。通过对模型进行仿真模拟以及实验研究,得到了后向散射光光强数据。通过对比仿真模拟数据与实验数据,验证了该模型的可行性与有效性,对光散射法测量蒸汽湿度的实验分析以及工程实践具有重要意义。     

An efficient and green process for the synthesis of 5-methyl-2-nitrobenzoic acid

Research on Chemical Intermediates - A new and environmental friendly nitration process of methyl 3-methylbenzoate by mixtures of HNO3/Ac2O for the synthesis of 5-methyl-2-nitrobenzoic acid has...     

聚丙烯及增韧剂对复合材料熔接痕强度的影响

研究了聚丙烯基体的熔体粘度(以熔体流动速率表征)、增韧剂POE的粘度(以门尼粘度表征)、增韧剂POE的含量等因素对聚丙烯复合材料熔接痕强度的影响。结果表明:聚丙烯基体/增韧剂的粘度比越小,聚丙烯复合材料的熔接痕强度越高,即聚丙烯粘度越小、增韧剂粘度越大,整个复合材料的熔接痕强度越高;增韧剂POE的含量越大复合材料的熔接痕强度越小。     

Effect of quality control on the proliferation of the extract from Taraxacum mongolicum Hand.‐Mazz. in Lactobacillus plantarum

In recent years, the fingerprint of high‐performance liquid chromatography has been extensively applied in the identification and quality control of traditional Chinese medicine. It can be a potential protocol for assessing the authenticity, stability and consistency of traditional Chinese medicine and guaranteeing the expected biological activity. In this paper, a method using high‐performance liquid chromatography to identify and control the quality of the extract of Taraxacum mongolicum Hand.‐Mazz. (TME) was established. With this method, the correlation coefficients of the similarity of 10 batches were ≥0.994. The TME displayed a steady proliferative effect in Lactobacillus plantarum. In brief, this study successfully built a reliable, simple and efficient method to control and confirm the quality and the stability of biological activity of the TME.     

Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.     

Sulfate-induced electrochemical instability in the transpassive region during the electrooxidation of Na2S on Pt

Journal of Solid State Electrochemistry - The effects of chemisorbed sulfate on the spatiotemporal dynamics of Na2S in strongly alkaline solutions were investigated via electrochemical measurements...     

Intercalated kaolinite as an emerging platform for cancer therapy

An innovative cancer therapy strategy regarding the interface engineering of kaolinite has been designed. The exposed silanol group facilitates more guest species with high dispersion on the supports. Mn_3O_4 magnetic nanoparticles are uniformly distributed on external surfaces of the Kaolin_(C12N)with the Al–O–Mn bond for the detection of the tumor microenvironment by T1-MRI; Doxorubicin(DOX) are loaded in the interlayer space with the electrostatic interaction for chemo-treating; and KI is coated on the outer layer of the nanocomposites based on the electrostatic interaction for thyroid cancer targeting. The synergetic effects and the treatment mechanism enhanced by the interface engineering, KI@DOX-Mn_3O_4-Kaolin_(C12N)can cause remarkably low cell viability(57%, 200 μg/mL), tumor shrinking(75%, 20 μg/kg), and accumulation into the tumor tissues. The novel kaolinite based drug delivery system is expected to incorporate imaging diagnosis, targeted therapy and drug delivery into one single system for postoperative residual thyroid cancer treatment and observation for metastasis of focal area.