Catalytic Adsorptive Stripping Voltammetry of Germanium(IV) in the Presence of Gallic Acid and Vanadium(IV)‐EDTA

A highly sensitive and selective catalytic adsorptive cathodic striping procedure for the determination of trace germanium is presented. The method is based on adsorptive accumulation of the Ge(IV)‐gallic acid (GA) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species. The reduction current is enhanced catalytically by addition of vanadium(IV)‐EDTA. The optimal experimental conditions include the use of 0.03 mol/L HClO₄ (pH1.6), 6.0×10^?3 mol/L GA, 3.0×10^?3 mol/L V(IV), 4.0×10^?3 mol/L EDTA, an accumulation potential of ?0.10 V(vs. Ag/AgCl), an accumulation time of 120 s and a differential pulse potential scan mode. The peak current is proportional to the concentration of Ge(IV) over the range of 3.0×10^?11 to 1.0×10^?8 mol/L and the detection limit is 2×10^?11 mol/L for a 120 s adsorption time. The relative standard deviation at 5.0×10^?10 mol/L level is 3.1%. No serious interferences were found. The method was applied to the determination of germanium in ore, mineral water and vegetable samples with satisfactory results.     

方酸染料在远红光区／近红外区对纳米晶二氧化钛电极的高效敏化作用

Four para-dialkylaminophenyl （PDAAP1-PDAAP4） bearing carboxyl groups were studied for application to the dye-sensitized solar cells （DSC）. It was found the short spacer CH2 between carboxyl and dialkylaminophenyl chromophore in PDAAP3 and PDAAP4 led to highly efficient monochromatic incident photon-to-current conversion efficiencies （IPCE）, however the long alkyl group C4H9 attached on aniline moieties in PDAAP2 and PDAAP4 favored improvement of open-circuit photovoltage. Thus, the solar cell sensitized by PDAAP4, having both short carboxyl groups CH2COOH and long alkyl groups C4H9, exhibited the IPCE maximum of 73% at 670 nm and overall energy conversion efficiency η of 3.06%, representing the highest IPCE and η values so far in dialkylaminophenyl-based organic dye-sensitized semiconductor solar cells. Taking advantage of the highly efficient sensitizing ability of PDAAP4 in far-red region, the data of IPCE above 630 nm of the solar cells were improved greatly by cosensitization with both N3 and PDAAP4. The influences of the TiO2 film thickness and the concentration of 4-tert-butylpyridine （TBP） in electrolyte were also investigated.     

3,5-diBr-DMPAP直接光度法测定葡萄糖酸锌含量

为建立一种快速、简便、灵敏测定葡萄糖酸锌含量的方法,在非离子型表面活性剂聚氧乙烯异辛基苯基醚(TritonX-100)存在下,用2-(3,5-二溴-2-吡啶偶氮)-5-二甲氨基酚(3,5-diBr-DM-PAP)作显色剂,直接光度法测定了葡萄糖酸锌。结果表明,该法显色络合物最大吸收波长为560 nm,线性范围为0~1.5μg.mL-1,表观摩尔吸光系数为1.10×105L.mol-1.cm-1,回收率为98.7%~102.2%,具有操作快速、简便,结果灵敏可靠等优点,应用该法直接测定补锌口服液葡萄糖酸锌含量,结果满意。     

Coaxial electrospinning core-shell fibers for self-healing scratch on coatings

Polystyrene (PS) fibers with core-shell structure were prepared by coaxial electrostatic spinning using liquid epoxy or curing agent as the core and PS solution as the shell. Scratch self-healing coatings were realized by using the healant-loaded core-shell fibers in the matrix.     

Two New C—21 Steroidal Glycosides from Cynanchum aurichulatum

Two new C-21 steroidal glycosides, cynanauriculoside I and cynanauriculoside Ⅱ, were isolated from the roots of Cynanchum aurichulatum. Their structures were established using spectroscopic methods including one and two-dimensional NMR.     

CdS/SiO2复合材料的低频Raman散射研究

对用溶胶凝胶法制备的ＣｄＳ／ＳｉＯ２复合材料进行低频Ｒａｍａｎ散射研究，结果表明可从其低频Ｒａｍａｎ散射峰位计算出ＣｄＳ微晶的粒径，两种不同的低频振动模式由激发光的两种偏振方向加以区分，低频Ｒａｍａｎ散射射的二级散射峰根据实验结果加以指认，所得平均粒径结果与透射电镜观察结果有较好的对应关系，复合材料吸收光谱吸收边蓝移与ＣｄＳ纳米子粒径之间存在着密切的关系，实验证明，样品吸收边能量与ＣｄＳ平均粒径的     

紫杉醇的合成进展

紫杉醇是一种重要的抗癌药物,它具有复杂新颖的化学结构,为三环二萜类化合物.本文综述了紫杉醇的半合成和紫杉烷环的各种合成方法.     

离子液体介导CO2化学转化研究进展

The efficient utilization of carbon dioxide (CO₂) as a C1 feedstock is of great significance for green and sustainable development. Therefore, the efficient chemical conversion of CO₂ into value-added products has recently attracted a lot of research attention in recent years. The transformation of CO₂ generally requires high-energy substrates, specific catalysts, and harsh reaction conditions due to its high thermodynamic stability and kinetic inertness. Consequently, several efforts have been dedicated toward the development of high-performance catalysts and new reaction routes for CO₂ conversion over the last few decades. To date, many routes of convert CO₂ into value-added chemicals have been proposed, together with the development of heterogeneous and homogeneous catalysts. Among the advanced catalysts reported to date, ionic liquids (ILs) have been widely investigated and show great potential for the efficient, selective, and economical conversion of CO₂ into highly valuable products under mild conditions, even under ambient conditions. Some task-specific ILs have been designed with unique functional groups (e.g., —OH, —SO₃H, —NH₂, —COOH, and —C≡N), which can act as the solvent, absorbent, activating agent, catalyst, or cocatalyst to realize the transformation of CO₂ under metal-free and mild conditions. In addition, a variety of catalytic systems composed of ILs and metal catalysts have also been reported for the transformation of CO₂, in which the combination of the IL and metal catalyst is responsible for CO₂ conversion with high efficiency. In this review article, we summarize the recent advances in IL-mediated CO₂ transformation into chemicals prepared via C—O, C—N, C—S, C—H, and C—C bond forming processes. ILs that can chemically capture CO₂ with high capacity are first introduced, which can activate CO₂ via the formation of IL-based carbonates or carbamates, thus realizing the transformation of CO₂ under metal-free and mild conditions. Recent progress in IL-mediated CO₂ transformations to form carbonates and various kinds of N- and S-containing compounds (e.g., oxazolidinones, ureas, benzimidazolones, formamides, methylamines, benzothiazoles, and other chemicals) as well as CO₂ hydrogenation to give formic acid, methane, acetic acid, low-carbon alcohols, and hydrocarbons has been summarized in this review with a focus on the reaction routes, catalytic systems, and reaction mechanism. In these reactions, ILs can simultaneously activate the substrate via strong H-bonding in addition to activating CO₂, and the cooperative effects among the ionic and molecular species and metal catalysts accomplish the reactions of CO₂ with various kinds of substrates to afford a wide range of value-added chemicals. Finally, the shortcomings and perspectives of ILs are discussed. In short, IL-mediated CO₂ transformations provide green and effective routes for the synthesis of high-value chemicals, which may have great potential for a wide range of applications.     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

联萘冠醚的合成新方法

一种用于合成含联萘基冠醚的新方法。以消旋，手性联萘酚为起始原料，先与氯乙醇反应制得2,2'-二（2－羟基乙氧基）－1,1'－联二苯，再与二甘醇或三甘醇对二对甲苯磺酸酯反应，成功制得了4种联萘冠醚。