基于新型电荷生成层的P-i-N结构白色有机叠层电致发光器件

采用2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP): 5 wt.% cesium carbonate(Cs₂CO₃)和N, N'-Bis(naphthalen-1-yl)-N,N'-bis(phenyl)-benzidine(NPB): 20 wt.% molybdenum oxide(MoO₃)分别作为器件的电子注入层和空穴注入层,研究了N型和P-i-N结构有机电致发光器件的载流子传输特性.载流子传输层中BCP: Cs₂CO₃和NPB:MoO₃的引入有效增强了载流子注入能力,从而降低了器件的驱动电压.基于新型电荷生成层BCP: 5 wt.% Cs₂CO₃/ NPB: 20 wt.% MoO₃制备了色稳定、高效率P-i-N结构有机叠层器件.与单元器件相比,引入新电荷生成层有机叠层器件的最大电流效率增大了2.5倍,表明该电荷生成层可以有效地将电子和空穴分别注入到相邻发光单元中.采用该电荷生成层制备了P-i-N结构白色有机叠层器件,器件的上下发光单元分别为橙光和蓝光发射.当发光亮度从500增加到5 000 cd/m²时,器件的色坐标稳定在(0.33, 0.29)附近,接近白光等能点.利用单色发光单元堆叠制备白色有机叠层器件的方法为实现色稳定、高效率的白色有机电致发光器件提供了一种有效的途径.     

反常积分∫^∞x sint/t^αdt的估计式

当O〈a〈2时,积分∫^∞x sint/t^αdt收敛．本文研究在2≤a〈4时,反常积分∫^∞x sint/t^αdt当x→0^＋时的估计式．     

AaaS:Agent云平台研究与实现

云计算是一种通过互联网将各种资源按照一定的方法整合在一起,以服务的形式向外提供的商业模式,有着良好的发展前景.Agent技术拥有其他技术无法比拟的智能性,并在各个领域都得到了广泛的应用.但Agent软件的系统开发、部署、运行以及维护仍采用传统的技术方案,无论在硬件还是软件设施上都存在着严重的浪费,因此将云计算与Agent技术结合起来,建立基于云计算的Agent平台(AaaS),来解决上述存在的问题,利用虚拟化技术解决硬件资源的浪费,设计开发Agent开发工具箱(ADT)以统一的标准来开发和部署Agent,提供云控制器来实时监测Agent的运行状态,进而动态的解决Agent运行时存在的问题.     

胍基硅前驱体的合成及应用

以胍基取代的二甲基二氯硅烷与胺基锂反应合成了3种硅基化合物,使用核磁共振、高分辨质谱、元素分析对化合物结构进行了表征,通过热重分析(TGA)研究了化合物的热稳定性、挥发性、蒸汽压等性能。 3种化合物均具有良好的热稳定性及挥发性,无明显热分解过程,固体残留小于1%,接近纯挥发过程,最高蒸汽压在3600~5300 Pa,满足前驱体使用要求。 以二甲基-胍基-甲乙胺基-硅烷为前驱体,采用螺旋波等离子体气相沉积(HWPCVD)工艺制备了硅基薄膜,使用X射线光电子能谱(XPS)和扫描电子显微镜(SEM)分析了薄膜的化学组成和膜表面结构,XPS分析结果证实该薄膜为Si、N、C组成,实验结果表明,该类胍基硅化合物可作为硅基化学气相沉积(CVD)前驱体材料应用于集成电路制造。     

汽包锅炉炉内局部结渣实时诊断研究

研究了汽包锅炉炉膛内局部结渣的故障诊断问题.选取膜式水冷壁背火侧三个温度点──鳍端温度、鳍根温度和管外壁中点温度──作为炉内局部结渣故障特征参数,使用灰渣层热阻反映炉内水冷壁局部结渣程度,运用径向基函数网络建立起描述故障特征参数和局部结渣程度之间高度非线性映射关系的故障诊断模型.实例分析表明:该方法诊断结果准确,无需布置昂贵的热流计,是一种有效的诊断炉内局部结渣的故障诊断方法.     

Theoretical Investigation of Exchange Bias in Compensated Cases

The exchange bias （EB） of the ferromagnetic （FM）/antiferromagnetic （AFM） bilayers in a compensated case is studied by use of the many-body Green＇s function method of quantum statistical theory. The so-called compensated case is that there is no net magnetization on the AFM side of the interface. Our conclusion is that the EB in this case is primarily from the asymmetry of the interracial exchange coupling strengths between the FM and the two sublattices of the AFM. The effects of the layer thickness, temperature and the interracial coupling strength oi2 the exchange bias HE are investigated. The dependence of HE on the FM layer thickness and temperature is qualitatively in agreement with experimental results. HE is nearly inversely proportional to FM thickness. When temperature varies, both HE and He decrease with temperature increasing. The anisotropy of the FM layer only slightly influence He, but does not influence HE.     

Associated Production of Scalars and New Gauge Bosons from a Little Higgs Model at the LHC

The littlest Higgs model with T-parity （LHT model） predicts the existence of the T-odd scalars （Φ^±, Φ^0, and Φ^P）. We consider the production of these new particles associated with T-odd gauge bosons at the Large Hadron Collider （LHC）. It is found that the partonic process qq^1 →Φ^＋ BH can generate a number of the characteristic signal events with a charged lepton and large missing energy at the LHC.     

Establishment of Configuration with Optimized Current Profile in Pellet Fuelled Discharge on HL-2A

A sawtooth-free period is produced following the pellet injection in the pellet fuelled discharge of qa = 3.4 （where qa is the safety factor at the plasma boundary） in the HL-2A tokamak. Establishment of the current profile such as in the hybrid scenario is studied under the condition of pellet injection in HL-2A. It is shown that a q-profile of weak negative shear is produced immediately after the pellet injection, and it then evolves to a broad flat profile with q0 〉 1 （where qo is the safety factor at the centre）. The measured MHD mode structures evidence consistencies of the evaluated q-profile with locations of the q = 1 surface in the sawtoothing period and of the q = 2 surface in the sawtooth-free period. TRANSP analysis indicates that the energy confinement is enhanced substantially during and after pellet injection, which is resulted from the q-profile optimization and the plasma density peaking.     

Calculations of Photo-Ionization Cross Sections for Lithium Atoms

Photo-ionization cross sections for the ground and the ≤5 excited states of lithium atoms are calculated in the photoelectron energy ranging from threshold to 0.5 Rydberg. The wavefunctions for both the bound and continuum states are obtained by solving the SchrSdinger equation numerically in a symplectic scheme. Our results are in excellent agreement with the recent experimental measurements and in harmony with other theoretical calculations.     

几种Bi-2223/Ag超导带材层状复合结构的制备及性能研究

本文利用Bi-2223/Ag高温超导带材与抗拉强度σb为700MPa的铜带进行组合,带材宽度面间采用低熔点的Sn-Ag-Cu无铅焊料进行连接,制备了C-SC-C型、SC-C-SC型(C代表铜带,SC代表高温超导带)等四种层状复合结构.研究和考察了四种结构样品在室温下的拉伸性能和弯曲性能,以及电性能等.测试结果表明:与高温超导带材相比,复合后结构的拉伸性能得到了提高;复合结构中采用两根高温超导带材后,提高了传输电流的能力.研究结果为Bi-2223/Ag高温超导带材的实际应用以及新应用结构的设计提供了参考数据和实验依据.