Synthesis and Crystal Structure of a Dinuclear Complex of Cu（II） with Tetra（3,5-diphenyl pyrazole）

A Cu(II) complex of tetra(3,5-diphenyl pyrazole) [Cu(C15H12N2)2Cl2]2 (1) was synthesized, and its structure was determined by single-crystal X-ray diffraction and further characterized by elemental analysis, NMR and IR. 1 belongs to the monoclinic system, space group P21/c with a = 13.3780(5), b = 15.1392(6), c = 15.5923(6) , β = 124.522(2)°, Z = 2 and V = 2601.86(17) 3. In 1, each Cu2+ ion is coordinated with two N atoms from two tetra(3,5-diphenyl pyrazole) ligands and three Cl- anions to give a distorted square-pyramidal geometry, which is further linked through edge-sharing bridging by Cl- anions to form a centrosymmetric dinuclear structure.     

成教实验教学与技能竞赛对接模式的探索

针对成教生生源结构和学习特点,以分析化学实验教学为例,在日常教学中通过强化学生实验操作培训,提高学生分析检测能力。藉举办化学分析工技能竞赛,促进教师教学形式的转变,提升学生自主探究能力。将实验教学与技能竞赛相对接,增强学生就业竞争力,提升学院办学影响力与认可度。     

An All-Thin-Film Electrochromic Device Composed of MoO3--LiBSO--NiOx Multilayer Structure

An all-thin-tilm （ATF） electrochromic device for modulating the optical transmittance is manufactured using magnetron sputtering. The devices consists of MoO3 as the main electrochromic layer, LiBO2 ＋Li2SO4 （LiBSO） as the ion conductor layer, and NiOx as the complementary electrochromic layer. Glass covered with indium tin oxide （ITO） is used as the substrate and the ITO film is used as the bottom electrode. The ITO film deposited on the top of the devices is used as the other electrode. The structure and morphology of the films are characterized by x-ray diffraction （XRD） and scanning electron microscopy （SEM）. The devices exhibit good optical properties with low transmittance values in the coloured state, and the optical modulation is measured by spectrophotometer in the wavelength range from 400 to 800nm. The average visible light transmittance reaches 50.2% and 3.7% in bleached and coloured state, respectively. The results indicate that such a monolithic system has great potential to be applied in smart windows.     

直接Z型LaNiO3/Mn0.2Cd0.8S异质结催化剂光解水产氢性能及机理探究

以LaNiO_3纳米颗粒为基质,在水热法制备CdS的过程中引入Mn~(2+)离子,原位合成直接Z型LaNiO_3/Mn_(0.2)Cd_(0.8)S异质结光催化剂。分别采用场发射扫描电镜、X射线衍射、X射线光电子能谱、紫外可见漫反射光谱、氮气吸附-脱附测试以及电化学测试等分析方法对制备的催化剂进行表征。在光解水产氢测试中,LaNiO_3/Mn_(0.2)Cd_(0.8)S异质结光催化剂在5 h的H_2产量达到1 190.3μmol,相较于CdS和Mn_(0.2)Cd_(0.8)S,其H_2产量分别提高了 25倍和10倍。荧光和电化学实验证实,Mn~(2+)的引入能够有效地促进光生载流子的分离,同时LaNiO_3/Mn_(0.2)Cd_(0.8)S之间异质结的构筑能有效地促进光生载流子在界面间的迁移、分离,从而促进其光解水产氢效率和稳定性的提高。结合一系列表征和活性测试结果提出直接Z型光解水反应机理,很好地阐述了其光解水产氢活性和稳定性的增强。     

利用FEL康普顿背散射实现对NSRL辐射波段的扩展

 针对NSRL同步辐射光源不能开展硬X射线领域实验研究的缺点,提出了利用FEL康普顿背散射产生高亮度极化的硬X射线,并利用FEL波长可调的特点来连续调节硬X射线的波长。同时还针对NSRL光源的参数,提出了一个初步可行的远红外FEL参数和背散射工作方式,并给出了理论结果。     

β-环糊精功能化聚丙烯腈纳米纤维的制备及对亚甲基蓝的吸附性能β-环糊精功能化聚丙烯腈纳米纤维的制备及对亚甲基蓝的吸附性能

以N,N-二甲基甲酰胺(DMF)为溶剂, 利用静电纺丝法制备了聚丙烯腈(PAN)/β-环糊精(β-CD)纳米纤维. 通过场发射扫描电镜、红外光谱和粉末XRD对纳米纤维进行了表征, 并检测了纺丝溶液的电导率和黏度. 结果表明, β-CD的添加量可以改善纳米纤维的形貌, 固定在纤维上的β-CD保留了空腔结构, 为其在纳米纤维中发挥超分子特性提供了可能. 通过紫外-可见光谱法研究了PAN/β-CD纤维对亚甲基蓝(MB)溶液的吸附性能. 结果表明, 纳米纤维中的β-CD显著提高了PAN/β-CD纤维对MB的吸附能力, 使其在吸附分离、电化学传感器及药物控制释放等领域具有潜在的应用价值.     

ITO薄膜可见光区增透性能研究

采用MPS单极性脉冲磁控溅射法,在PMMA衬底上制备SiO2增透薄膜,通过改变溅射时间达到最优的增透效果.在此基础上,制备了不同溅射时间的ITO薄膜,系统研究了增透前后的可见光透过率、方块电阻和红外发射率的变化.实验结果表明,增透后薄膜可见光平均透光率提高大约6;,对于溅射时间小于60 min的ITO薄膜增透之后的平均透光率达到80;以上,同时薄膜的方块电阻以及红外发射率变化较小.     

Studies on Phase Behavior of Alkyl Polyglucoside Based on Microemulsions with Modified Fishlike Phase Diagram

The three-phase behavior in the quaternary system of an alkyl (C8/10^- or C12/14^-)polyglucoside / 1-butanol / n-octane / water has been studied at 40℃ with the modified fishlike phase diagram, which is presented by us for the first time. The mass fraction of 1-butanol in the hydrophile-lipophile balanced interfacial layer, A^S, the coordinates of the start point B and the end point E of the phase diagram, and the solubilities of alkyl polyglucoside and 1-butanol in n-octane phase were calculated. The solubilization of the microemulsion was also discussed.     

高能p-A碰撞Drell-Yan过程中的初态核效应

核遮蔽和能量损失效应是p-A碰撞中两种重要的初态核效应. 本文利用从轻子-原子核深度非弹性散射实验数据中抽取的束缚核子的部分子分布函数, 在色弦模型中研究了Drell-Yan双轻子对产生过程中的能量损失效应. 通过对FNAL E772和E866实验数据的χ²分析, 得到夸克在冷核中的能量损失率为－dE/dz=2.06GeV/fm. 这和该模型理论预言的结果(－dE/dz～2GeV/fm)一致. 通过将理论计算结果与实验数据进行比较, 发现考虑到能量损失后能很好的解释实验现象.     

聚乙二醇/羟基磷灰石纳米杂化材料的制备及表征

以聚乙二醇单甲醚(MPEG)为原料, 采用先磷酰化再水解的方法合成了聚乙二醇单甲醚磷酸酯(P-MPEG). 以P-MPEG为空间位阻剂, 采用共沉淀法合成了内核为纳米羟基磷灰石(nHA)、 壳层为MPEG链的纳米杂化材料. 用傅里叶变换红外光谱(FTIR)、 X射线衍射(XRD)、 透射电子显微镜(TEM)和激光粒度分析(LPSA)对材料结构进行了表征. 结果表明, 所合成的杂化材料不仅能在水中再分散, 而且可以在甲醇和二甲基甲酰胺(DMF)等有机溶剂中再分散.