Preparation and Evaluation of Molecularly Imprinted Monolithic Column for Felodipine in Micro-liquid Chromatography

This study concentrated on the production of molecularly imprinted polymers (MIPs) as highly selective sorbents for felodipine (FLD), a representive dihydropyridine calcium antagonists. Demonstrated chromatographically through a selection factor, these MIPs showed high selectivity for the template molecule among a group of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound.     

Analysis of effective molecular diffusion rates for verteporfin in subcutaneous versus orthotopic Dunning prostate tumors

Photosensitizer biodistribution change inside tissue is one of the dominant factors in photodynamic therapy efficacy. In this study, the pharmacokinetics of a benzoporphyrin derivative (BPD), delivered in verteporfin for injection formulation, have been quantified in the rat Dunning prostate tumor MAT-LyLu model, using both subcutaneous and orthotopic sites. Blood plasma sampling indicated that BPD had a bi-exponential metabolic lifetime in vivo, with the two lifetimes being 9.6 min and 8.3 h. The spatial distributions in the tumor were quantified as a function of distance from the perfused blood vessels, using fluorescence histologic images of the tumor. A fluorescent vascular marker was used to obtain locations and shapes of perfused capillaries at a wavelength of emission different from that of BPD and to allow colocalized images to be acquired of vessel and BPD locations. Using the BPD fluorescence images obtained 15 min after intravenous administration, a forward finite-element solution to the diffusion equation was used to predict the drug distribution by matching the fluorescence intensity images observed microscopically. An inverse solver was used to minimize the root mean square error between the image of simulated diffusion and the experimental image, resulting in estimation of the diffusion coefficient of BPD in the tumor models. Effective diffusion coefficients were 0.88 and 1.59 microm2/s for the subcutaneous and orthotopically grown tumors, respectively, indicating that orthotopic tumors have significantly higher vascular extravasation rates as compared with subcutaneous tumors. This analysis supports the hypothesis that leakage rates of the photosensitizer vary considerably. Thus, although varying the time between injection and optical irradiation may be used to vary the targeting between vascular and less vascular areas, the precise time of treatment will depend on the nature of the permeability of the vasculature in the tissue being treated.     

锌和锡参与下末端环氧化物的选择性烯丙基化反应

烯丙基溴和金属辛或锡成功地将末端环氧化合物1一锅法合成高烯丙基醇2和双高烯丙基醇3. 还研究了环氧化合物取代基的影响, 并提出了此烯丙基化的反应途径 .     

离子液体两相不对称氢甲酰化催化反应的研究

从(R)-BINAP出发制备水溶性磺酸钠盐配体(R)-BINAPS,采用离子液体BF4和PF6为介质,实现其Rh配合物对乙酸乙烯酯的两相不对称氢甲酰化反应.实验结果表明,在以BF4为介质的乙酸乙烯酯不对称氢甲酰化反应中,该催化剂在温和条件下显示出高于相应均相体系的产物ee值和异构醛选择性,并在6次循环使用中,反应产物的ee值、选择性和转化率均无明显改变;在离子液体体系中添加适当的甲苯时,油溶性配体(R)-BINAP与Rh组成的配合物催化剂亦可形成类似的两相反应体系,但其活性和选择性在重复使用中呈明显下降趋势.本文还考察了溶剂体系、膦铑比、温度、压力、时间等的影响,并尝试苯乙烯的两相不对称氢甲酰化反应.     

铝镧修饰MCM-41介孔分子筛的合成、表征及在乙氧基化反应中的催化性能

以十六烷基三甲基溴化铵(CTAB)为模板剂,正硅酸乙酯(TEOS)为硅源,乙二胺为碱性介质,水热法合成了硅铝、硅镧及硅(铝 镧)摩尔比为30的Al-MCM-41、La-MCM-41和Al-La-MCM-41介孔分子筛,通过XRD、IR、NH3-TPD吸附脱附、BET、热分析及CCl4吸附等方法对分子筛的晶体结构和表面物性进行了研究,XRD及BET研究结果表明,所合成的分子筛具有典型的六方介孔结构特征及较大的比表面积.NH3-TPD结果表明所合成的介孔分子筛均达到中强酸酸度.将Al-MCM-41、La-MCM-41和Al-La-MCM-41分别用于催化乙氧基化反应,研究结果表明Al-La-MCM-41具有更高的催化活性,Al-La-MCM-41为正辛醇质量的5%,反应温度为120℃,反应压力0.2MPa,n(醇)∶n(环氧乙烷)=1∶3时,正辛醇聚氧乙烯醚产品的收率达92%.     

Cu（I）/Diamine-catalyzed Aryl-alkyne Coupling Reactions

Arylalkynes are important building blocks for the synthesis of natural products,pharmaceuticals,and artificial molecular devices1.They are often synthesized via the Pd-catalyzed Sonogashira coupling reactions between aryl halides and terminal alkynes2,3.Unfortunately,it remains difficult to apply the Sonogashira reaction to industrial scale and/or pharmaceutical synthesis,due to the high cost of Pd and the difficulty in removing the toxic Pd residues from the reaction products.Thus it is wor…     

声速法测定纤维的取向度

纤维具有声学的各向异性,声波通过纤维的速度与纤维中高分子链的取向程度有关。测定声波沿纤维轴方向的传播速度可以计算纤维的取向度α: α=1-C~2_u/C~2其中C及C_u分别为声波通过取向及无规取向纤维的速度。 实验仪器采用每秒100次的脉冲电流输至高音喇叭的音圈,纤维通过弹簧夹子与喇叭振膜的中心相耦合。脉冲电流激发喇叭振膜振动系统,使产生逐渐衰减的固有频率振动(约4000赫)。离振源200厘米处的纤维另一端有拾音器,其输出讯号接至由脉冲电压触发扫描的脉冲示波器,从示波器可以观察到从振源到拾音器的距离间声波在纤维中的传播时间,由此计算出声波通过纤维的速度。 纤维的吸湿性与所受张力不同对其力学性貭均有影响,因此研究了相对湿度与张力对纤维中声速的影响,并选择了在室温(约30℃),相对湿度为60％和在小于纤维的临界杨氏模量的作用张力下进行声速法测定纤维的取向度。 研究了不同拉伸程度单纤维样品的声波传播速度,并外推到长度拉伸比为1时作为声波通过无规取向纤维的速度。实验结果表明,尼龙6纤维的取向度经拉伸与后处理逐渐增大至80％左右。 测定了不同品种的尼龙6纤维的取向度,具有较大强度的纤维其取向度较大。     

LB膜诱导下草酸钙晶体的生物矿化研究

草酸钙（CaC２O４）结石是生物体内异常矿化形成的产物，是泌尿系结石的主要组成部分犤１犦。它形成于泌尿系统中尿路表皮细胞上犤２犦。磷脂的Langmuir－Blodgett（LB）膜是生物细胞膜的简化模拟体系犤３犦。用磷脂LB膜作为模板来研究CaC２O４晶体的形成过程，比在水溶液中更能接近CaC２O４结石在生物体内细胞膜表面形成的真实情况，将有助于对尿路结石的形成及防治的研究犤４犦。尿大分子硫酸软骨素A（C４S）存在于尿液中，但不存在于CaC２O４结石中。在结石病人尿液中C４S的含量明显低于正常人尿液中的含量，因此推测其在体内…     

二维卷积在动力学分析中的应用

本文用计算机模拟和二维卷积研究了稀土与间乙酰基偶氮氯膦的显色反应，选择不同的模型参数可描述这类反应的细节，二维卷积则增强对叠合二维谱的分辨。     

Cooperatively assembled liquid crystals enable temperature-controlled Förster resonance energy transfer

Balancing the rigidity of a π-conjugated structure for strong emission and the flexibility of liquid crystals for self-assembly is the key to realizing highly emissive liquid crystals (HELCs). Here we show that (1) integrating organization-induced emission into dual molecular cooperatively-assembled liquid crystals, (2) amplifying mesogens, and (3) elongating the spacer linking the emitter and the mesogen create advanced materials with desired thermal–optical properties. Impressively, assembling the fluorescent acceptor Nile red into its host donor designed according to the aforementioned strategies results in a temperature-controlled Förster resonance energy transfer (FRET) system. Indeed, FRET exhibits strong S-curve dependence as temperature sweeps through the liquid crystal phase transformation. Such thermochromic materials, suitable for dynamic thermo-optical sensing and modulation, are anticipated to unlock new and smart approaches for controlling and directing light in stimuli-responsive devices.

A temperature-sensitive Förster resonance energy transfer system was constructed using a highly emissive liquid crystal co-assembled with Nile red, enabling thermo-optical modulation for controlling and directing light in stimuli-responsive devices.