Laser output of radial-slab solid-state laser

In this letter, numerical simulation and experimental study of a radial-slab solid-state laser are presented. The laser includes four crossing-slabs pumped by four Xe flashlamps. The numerical simulation of coherent intensity in the near field and the far field indicates that the laser with the structure can improve the quality of output beam compared with incoherent beam combination. The radial-slab solid-state laser is fabricated, and initial experiments are carried out at a pulse repetition of 1 Hz. Nine beams in the near field and one combined beam in the far field are obtained in our initial experiment. The experimental results are consistent with the numerical analysis in the coherent condition. The results show that coherent beam combination is obtained by this laser.     

Existence of heteroclinic orbits in a novel three-order dynamical system

In this paper,we design a novel three-order autonomous system.Numerical simulations reveal the complex chaotic behaviors of the system.By applying the undetermined coefficient method,we find a heteroclinic orbit in the system.As a result,the Si’lnikov criterion along with some other given conditions guarantees that the system has both Smale horseshoes and chaos of horseshoe type.     

Effect of active control on optimal structures in wall turbulence

The effect of active control imposed at the wall on optimal structures in wall turbulence is studied by using a linear transient growth model.When the detection plane of the control is located in the buffer layer,the influence of the control on the transient growth of large scale motion becomes negligible as Reynolds number increases.However,if the control signal is detected at the plane located in the logarithm region,the transient growth at large scale can be greatly suppressed.New peak values of transient growth resulting from the strong blowing and suction on the wall exist.The study indicates that a proper selection of control imposed on the wall can suppress the large scale motion in the logarithmic region.     

在SQUID心磁测量中基于奇异值分解和自适应滤波的噪声消除法

采用矩阵奇异值分解(singular value decomposition, SVD)的方法，对高温射频超导量子干涉仪(HTc rf-SQUID)采集到的单通道心磁信号进行处理.证明了对于近似周期性的心磁信号，在无参考噪声的情况下矩阵奇异值分解的方法与自适应窄带陷波相结合有较好的消除广谱噪声的效果. 关键词： 高温射频超导量子干涉仪 心磁信号 奇异值分解 噪声消除     

一类非线性边值问题正解的存在性

本文运用锥上的不动点理论,讨论了一类与一阶导函数有关的二阶奇性混合边值问题的正解存在性．     

Cr4+掺杂Li1.14Zn1.43SiO4透明微晶玻璃近红外宽带光谱特性

采用高温熔融法和热处理制备了Cr⁴⁺掺杂Li_1.14Zn_1.43SiO₄微晶玻璃, 探讨了不同热处理温度下样品的物相、微观形貌及发光性能. 结果表明: 580℃热处理2h得到的微晶玻璃, Li_1.14Zn_1.43SiO₄微晶的粒径约为5nm, 在808nm的二极管激发下, 可观察到中心波长位于1226nm, 半高宽为230nm的近红外宽带发射峰, 荧光寿命约为200.73±1.71μs. 随着热处理温度的升高, Cr⁴⁺离子所处的晶体场环境发生了变化, 且可以观察到样品吸收光谱发生微弱的蓝移, 而荧光光谱发生少量的红移, 分析了晶体场环境变化对样品发光性能的影响. 关键词： 铬离子 微晶玻璃 超宽带发光 晶体场     

Molecular Dynamics Simulation of Temperature-dependent Flexibility of Thermophilic Xylose Isomerase

构建了嗜热栖热菌木糖异构酶与底物木糖的复合物模型,并运用NAMD2.5软件对其在300 和360 K下进行了10 ns的分子动力学模拟. 对该酶的回旋半径、亚基间相互作用及残基柔性进行了计算与统计分析,确定了该酶在360 K时柔性残基及区域. 研究发现与300 K相比,360 K时木糖异构酶中B-因子增幅较大的残基主要可分为两组：一组位于催化结构域,是由残基55～80组成的helex-loop-helix区域,另一组位于其亚基界面上. 研究表明高温下该酶催化结构域回旋半径增加,可能加速了活性中心的运动从而有利于D-木糖的异构化反应.在360 K时亚基界面上减少了8个氢键和5个离子对,这可能也是高温下其整体结构刚性下降并且活性升高的主要原因,该结果也对文献报道的该酶E372G突变体冷适应的实验现象进行了解释. 研究结果揭示了嗜热栖热菌木糖异构酶温度和结构柔性之间的关系.     

具有时间分辨能力的强流电子束束剖面测量系统

 高能强流电子束的束参数测量是加速器研制过程中重要的一项测量工作,由于光学渡越辐射具有时间响应快、分辨率高等特点而被用于测量电子束的具有时间分辨能力的束剖面、发散角、能量等多个参数;通过电子束束参数的时间分辨测量则能够了解电子束产生、输运中的问题,非常有利于加速器的研究与调试。一种具有时间分辨能力的、利用光学渡越辐射进行高能强流电子束束斑测量的系统在中国工程物理研究院被建立起来,并在12 MeV LIA的电子束束斑的测量中用于电子束传输研究,该系统拍摄图像的间隔时间最小为10 ns,最小的曝光时间为3 ns,具有一次可以拍摄8幅图像的能力,并获得了12 MeV LIA约100 ns内相应的时间分辨的束斑变化情况,观察到了一些过去未观察到的现象,为加速器的研究提供了又一个新测试方法。     

优质GaAs/Si和AlGaAs/Si材料的MOCVD生长研究

用自制常压MOCVD装置,在Si衬底上生长GaAs和AlGaAs外延层,在高温去除Si衬底表面氧化膜之后,采用两步法,即低温生长过渡层,再提高温度生长外延层。得到了表面镜面光亮的优质GaAs和AlGaAs外延层。X射线双晶衍射仪测试GaAs外延层,其回摆曲线半峰宽是200孤秒,GaAs和AlGaAs外延层在77K温度下,PL谱半峰宽分别是17meV和24meV。