Electrorheological properties of suspensions of monodispersed micron‐sized polyaniline composite particles

Monodispersed micron‐sized polyaniline (PANi) composite particles were synthesized by chemically oxidative polymerization of aniline in the presence of functional porous polymer particles. The formation of the PANi‐coated composite particles was confirmed by scanning electron microscopy. Electrorheological (ER) properties of the monosized composite particle suspensions were then investigated under different DC electric fields by altering the particle characteristics. The ER effect of the PANi composite suspensions was largely dependent on the composition ratio (PANi loading), the particle conductivity, and the particle concentration. Dynamic oscillation measurements revealed that the applied electric field induced the viscoelastic property of the ER suspensions by generating the chain structures of the suspended particles. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1163–1170, 2002     

On‐chip generation of monodisperse giant unilamellar lipid vesicles containing quantum dots

Monodispersed lipid vesicles have been used as a drug delivery vehicle and a biochemical reactor. To generate monodispersed lipid vesicles in the nano‐ to micrometer size range, an extrusion step should be included in conventional hand‐shaking method of lipid vesicle synthesis. In addition, lipid vesicles as a drug carrier still need to be improved to effectively encapsulate concentrated biomolecules such as cells, proteins, and target drugs. To overcome these limitations, this paper reports a new microfluidic platform for continuous synthesis of small‐sized (～10 μm) giant unilamellar vesicles (GUVs) containing quantum dots (QDs) as a nanosized model drug. To generate GUVs, we introduced an additional cross‐flow to break vesicles into small size. 1,2 ‐ dimyristoyl‐sn‐glycero ‐ 3 ‐ phosphocholine (DMPC) in an octanol–chloroform mixture was used in the construction of self‐assembled membrane. Consequently, we have successfully demonstrated the fabrication of monodispersed GUVs with 7?12 μm diameter containing QDs. The proposed synthesis method of cell‐sized GUVs would be highly desirable for applications such as multipurpose drug encapsulation and delivery.     

Study on essential oils from the leaves of two Vietnamese plants: Jasminum subtriplinerve C.L. Blume and Vitex quinata (Lour) F.N. Williams

The essential oil constituents of the leaves of Jasminum subtriplinerve (Oleaceae) and Vitex quinata (Verbanaceae) cultivated in Vietnam were analysed by gas chromatography – flame ionisation detector (GC–FID) and gas chromatography – mass spectrometry (GC–MS) techniques. The main constituents identified in J. subtriplinerve were mainly oxygenated monoterpenes represented by linalool (44.2%), α-terpineol (15.5%), geraniol (19.4%) and cis-linalool oxide (8.8%). The quantitative significant components of V. quinata were terpene hydrocarbons comprising of β-pinene (30.1%), β-caryophyllene (26.9%) and β-elemene (7.4%). The chemical compositions of the essential oils are being reported for the first time.     

Catalytic Conversion of Macroalgae-derived Alginate to Useful Chemicals

Alginate, a main carbohydrate compound of macroalgae, can be hydrothermally converted to valuable organic products, such as furfural and organic acids, over various types of catalysts. In this review, alginate is evaluated as a renewable biomass feedstock for the production of the useful chemicals, based on the structural differences between alginate and conventional lignocellulosic biomass feedstocks. The influence of different catalysts and reaction conditions on the alginate depolymerization and the product distribution is discussed. Finally, future research direction for the catalytic conversion of alginate is suggested.     

Highly enantioselective cyanosilylation of aldehydes catalyzed by a chiral oxazaborolidinium ion

The chiral oxazaborolidinium salts 1 and 2 are excellent catalysts for the enantioselective cyanosilylation of a wide variety of aldehydes (see Table 1) using trimethylsilyl (TMS) cyanide and triphenylphosphine oxide as the source of a new reactive cyanide donor. This donor appears to be the isocyanophosphorane Ph3P(OTMS)(N=C:) (4). The novel process described herein has several advantages: predictability of absolute configuration of cyanohydrin products from a mechanistic model (3), high yields and very good enantiomeric purity of products (>/=90%), and, finally, easy and efficient recovery of the catalytic ligand.     

Separation of phospholipids using a diethylaminoethyl-silica gel column and thin-layer chromatography

Phospholipids derived from egg yolk are readily separated by DEAE-silica gel column chromatography using stepwise gradient elution. The overall recovery of phospholipids from the column is 85-95% at a loading capacity of 120 mg of lipids per 10 g of DEAE-silica gel. The complete separation of eight phospholipids (phosphatidylcholine, sphingomyelin, lysophosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, phosphatidylinositol, phosphatidylserine and lysophosphatidylserine; 5 micrograms each) is also achieved by one-dimensional DEAE-silica gel thin-layer chromatography with the solvent system chloroform-methanol-water-pyridine-58% ammonia solution (130:55:8:4:4, v/v).     

Application of central composite designs for optimisation of the chromatographic separation of monomethylarsonate and dimethylarsinate and of selenomethionine and selenite by ion-pair chromatography coupled with plasma mass spectrometric detection

Central composite designs (CCDs) were used in the study of the ion-pair chromatographic separation of arsenic and selenium species in tap water: monomethylarsonate, dimethylarsinate, selenomethionine and selenite. The ternary eluent consisted of tetrabutylammonium phosphate (TBA), sodium hydrogenphosphate (Na2HPO4) and 1% acetonitrile. CCD allowed the investigation of the influence of the eluent parameters, which varied from 0.5 to 4.2 mmol l-1 Na2HPO4, 0.5 to 4.2 mmol l-1 TBA and pH 4.9 to 8.2, on the capacity factors (k') of arsenic and selenium compounds. Furthermore, another mathematical model that permitted the variation of the chromatographic selectivity of species, computed from their retention data to be followed, was investigated. This showed the ability to locate the optimum conditions within the experimental design, so that arsenic and selenium species could be simultaneously quantified with good efficiency and resolution. A comparison between the predicted and the experimental response values was made in order to assess the prediction quality of the model. Response surfaces and isoresponse curves obtained from the mathematical models allowed the determination of the optimum chromatographic conditions and the robustness of the method. The predicted optimum zone allowing satisfactory determination of both arsenic and selenium compounds was pH 5.5-6.5, 2.5 mmol l-1 Na2HPO4 and 3.0-4.0 mmol l-1 TBA.