Analysis and Protection of One Thousand Hand Buddha in Dazu Stone Sculptures

The components of the rock, the pigments, the gold foils and the adhesive of One Thousand Hand Buddha in Dazu stone sculptures, Chongqing, China, have been analyzed by X-ray diffraction (XRD), X-ray fluorescence (XRF), infrared spectroscopy (IR), energy dispersive X-ray analysis (EDX) and fiber optics reflectance spectroscopy (FORS). Furthermore, the weathering and degeneration of One Thousand Hand Buddha have been discussed and the protective methods have been provided. In this work some useful information to study on conservation of stone relics is given.     

双(取代苯酰氧基)二茂钛衍生物的质谱分析

二茂钛类衍生物具有催化抗肿瘤活性,因而引起人们的研究兴趣。我们曾探讨了一系列双(取代苯酰氧基)二茂钛衍生物、含茂钛聚合物的合成、光谱、质谱及其反应性。本文报道有关衍生物的质谱分析,并讨论其规律性。     

DNA分子在气液界面的组装相变特性及其LB膜结构研究

对十八胺与DNA在气液界面上组装及其相变过程进行了研究，利用AFM观察了不 同压力下转移的DNA复合LB膜结构。发现在低表面压时，DNA复合单分子膜表现为技 术发散的分形结构；随着压力的升高，DNA复合膜逐渐由紧密的网状排布结构变为 团聚的块状和团簇结构。表明通过调节膜压，可使膜内DNA分子的构象发生大的变 化，从而生成具有特定形态的二维纳米图案。这种具有特殊形态和结构的DNA LB膜 可望为合成新型生物纳米结构有序功能体系提供模板。     

锂离子电池用纳米Sn/SnSb合金三维复合负极的制备及性能

采用多步电沉积法制备的三维多孔铜箔作为集流体、低温液相化学还原法制备的纳米Sn/SnSb 合金作为负极材料, 制备出一种新型三维多孔结构的纳米Sn/SnSb合金复合负极. 通过与普通负极电化学性能的对比实验发现, 这种新型三维复合负极具有如下优点: 三维多孔网络结构提高了负极活性材料与集流体之间的结合力, 使不含粘结剂电极的制备成为可能; 有效缓解了高容量负极活性材料在充放电过程中的体积膨胀, 提高了负极活性材料的循环性能, 当循环到第30周时, 普通负极剩余容量为初始容量的33%, 而三维复合负极剩余容量为初始容量的41%; 三维铜箔集流体的特殊结构为高容量负极活性材料提供了一个良好的导电环境, 使电极反应进行得更加完全, 从而获得了更高的电极比容量, 普通负极初始容量为480 mAh·g-1, 而三维复合负极达到了800 mAh·g-1. 纳米Sn/SnSb合金三维复合负极良好的电化学性能为锂离子电池负极结构的设计开发提供了新的思路.     

New Ni(II)Cu(II)Ni(II) trinuclear complexes with an 5=3/2 high-spin ground

Four new heterotrinuclear complexes have been synthesized and characterized, namely {[Ni(L)₂]₂[Cu(opba)]}(ClO₄)₂, where opba denotes o-phenylenebis(oxamato) and L stands for 1,10-phenanthroline(phen) (1), 5-nitro-l,10-phenanthroline(NO₂-phen) (2), 2,2′-bipyridyl(bpy) (S) and 4,4′-dimethyl-2,2′-bipyridyl(Me₂bpy) (4). The temperature dependence of the magnetic susceptibility of {[Ni(phen)₂]₂[Cu(opba)]}(ClO₄)₂3H₂O has been studied in the 4–300 K range, giving the exchange integral J—109 cm^?1. The HMT vs. T plot exhibits a minimum at about 100 K, characteristic of this kind of coupled polymetallic complex with an irregular spin-state structure.     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

平板折叠桌的设计模型

根据折叠桌的运动特征,选取折叠桌的四分之一为研究对象,建立任意角度下桌脚点的运动变化模型。考虑到产品稳固性、加工便利性和节约用材三方面对加工参数的影响,对折叠桌进行受力分析,得到多目标组合优化模型,用以确定出折叠桌的最优设计参数。针对用户提出的桌面形状要求,建立桌脚曲线的参数方程。作为模型推广,以椭圆状折叠桌为例,运用Matlab画出了桌脚边缘线在折叠过程中的动态变化示意图。同时,又深入研究Robert van Embricqs的滑动折叠桌,建立了新的桌脚曲线参数方程。最后,运用Matlab对多种形状折叠桌进行仿真,编写多目标优化算法,得出了最优加工参数,并进行了算法描述。     

Al-MCM-41 负载离子液体双酸位催化剂及制备生物柴油

采用不同硅铝比的MCM-41负载离子液体,制备得到一系列负载型双酸位催化剂,并用XRD、FTIR、N₂-吸脱附、热重分析及TEM对其进行表征,以大豆油与甲醇的酯交换反应为探针实验考察了其催化活性.结果表明,离子液体成功固载于介孔分子筛并能保持其介孔结构,且在酯交换反应中表现出良好的反应活性.在ILs负载量为30%,醇油物质的量的比为36:1,140 ℃下反应5 h,生物柴油收率在90%以上;而分子筛中Al的引入为活性组分离子液体构建了有益的酸环境,促进了其催化活性的提高;与均相离子液体相比,负载型催化剂又能明显提高生物柴油的收率,且回收利用4次后,生物柴油收率仍接近88%.     

功能性马丙共聚物树脂富集-分光光度法测定痕量铁(Ⅲ)

建立了功能性马来酸酐、丙烯酰胺共聚物树脂P(MA-AM)富集-分光光度法测定痕量Fe(Ⅲ)的新方法。考察了树脂对痕量Fe(Ⅲ)的吸附、洗脱行为。结果表明,在pH=3.5时,P(MA-AM)能富集Fe(Ⅲ),吸附30min时,最大吸附率达98.7%;以3.0mol/L的HCl作为洗脱液,Fe(Ⅲ)的回收率为96.2%;富集倍数可达20倍。该方法的检出限为0.02mg/L,相对标准偏差为3.0%,回收率范围为93.3%～97.6%。方法可应用于实际样品中痕量Fe(Ⅲ)的测定。