Cu-13.9Al-4Ni合金的热弹性马氏体相变内耗峰

采用不完全相变内耗测量法研究了Cu-13.9Al-4Ni合金在热弹性马氏体相变时其相变内耗峰与外界变量的依赖关系.当测量频率较低时,完全相变法所测量的单一内耗峰被成功分解成双峰,即高温内耗峰和低温内耗峰.低温内耗峰位置对应于相对动力学模量的最小值,高温内耗峰则对应于相对动力学模量的拐点位置,且呈现出明显的反常振幅效应.     

HPLC测定辛芩喷雾剂中的黄芩苷

建立HPLC测定辛芩喷雾剂中黄芩苷含量的方法.采用Hypersil C18 (4.6mm×150mm,5μm)为色谱柱,流动相为甲醇∶水∶磷酸(47∶53∶0.2,V/V/V),流速为1.0mL/min,紫外检测波长为280nm.在6.0-300μg·mL-1范围内线性关系良好(r=0.9993).加标回收率为97.02％,重复性实验的RSD为1.08％(n=3).本法操作简便、快速准确,重现性好,可作为该制剂的含量测定方法.     

试纸法快速测定高粱中单宁的研究

探讨了试纸与单宁反应的最佳条件,提出了用Fe(SCN)3-壳聚糖试纸法快速检测高粱中单宁的方法。结果表明,在pH 7.0～9.0的条件下,单宁与试纸上的显色物质反应生成紫红色稳定络合物,试纸颜色深浅与样品中单宁浓度成正比,通过与标准色阶图谱比较确定单宁浓度。试纸最低检出限达1.0μg/mL,5 min即可实现检测。应用于7种高粱样品中单宁含量的测定,并通过与国标法测定结果比较,本方法可实现半定量检测,已应用于高粱样品中单宁的实时、快速检测。     

Deflagration-to-detonation transition process for spherical aluminum dust/epoxypropane mist/air mixtures in a large-scale experimental tube

The deflagration-to-detonation transitions (DDTs) for clouds of spherical aluminum dust (SAD) mixed with air or epoxypropane mist (EPM) and air were investigated in a 29.6-m-long experimental tube of 199 mm in diameter. The clouds formed through the injection of SAD and SAD/liquid epoxypropane samples into the experimental tube. Explosions of the SAD/air mixture were initiated using a 7-m-long EPM/air cloud explosion ignited by a 40-J electric spark. Explosions in SAD/EPM/air clouds were initiated using a 1...     

Uniform persistence for population interaction models with time delay

In this paper uniform persistence is establised for kolmogorov type Prey‐Predator and competion models with per capitals ent growth rates that are dependent on time‐lagged population densities.     

Preparation and in vivo imaging of a novel potential αvβ3 targeting PET/MRI dual-modal imaging agent

Journal of Radioanalytical and Nuclear Chemistry - Multi-modal biomedical imaging has played an essential role in tumor diagnosis. However, constructing a multi-modal imaging contrast agent with...     

光电化学技术应用于抗氧化分析的研究进展

在新陈代谢过程中, 机体会产生大量以自由基为主要形式的氧化活性物质, 而抗氧化剂可以通过电子转移的方式捕获并中和自由基, 从而有效抵御自由基引起的细胞损害, 以保障和维护人体健康. 食品作为人体外源性抗氧化剂的重要来源可以有效补充因体内代谢及体液排出而损失的抗氧化物质, 因此对食品中抗氧化物质消除自由基的能力即抗氧化能力的测定和评价具有重要意义. 光电化学技术作为一种简单快捷、 低成本、 低背景且高灵敏度的测定方法, 能够有效克服光学法、 色谱法和电化学法等传统测试手段在抗氧化容量分析中的不足. 本文综述了基于半导体及其复合材料的光电化学传感平台的构建及食品体系抗氧化容量分析的研究进展, 评论了多种检测体系的特点并对其研究前景进行了展望.     

Enhanced Thermal Decomposition Properties and Catalytic Mechanism of Ammonium Perchlorate over CuO/MoS2 Composite

In this report, CuO/MoS₂ composites were successfully prepared by the hydrothermal method where nano‐sized CuO was uniformly distributed on the surface of hierarchical MoS₂ substrates (CuO/MoS₂ composites). Their physicochemical properties and catalytic performance in ammonium perchlorate (AP) decomposition were investigated and characterized by XRD, SEM, TEM, BET, XPS, TG/DSC and combustion measurement. The results showed that it could decrease AP decomposition temperature at high decomposition stage from 416.5 °C to 323.5 °C and increase the heat release from 378 J/g (pure AP) to 1340 J/g (AP with catalysts), which was better than pure CuO nanoparticles (345.5 °C and 1046 J/g). Meanwhile, it showed excellent performance in combustion reaction either in N₂ or air atmosphere. The results obtained by photocurrent spectra, photoluminescence spectra and time‐resolved fluorescence emission spectra indicated that loading CuO mediated the generation rate and combination rate of electrons and holes, thus tuning the catalytic performance on AP decomposition. This study proved that employing the supports that can synergistically interact with CuO is an efficient strategy to enhance the catalytic performance of CuO.     

表面分子印迹技术在分析化学中的应用研究进展

表面分子印迹聚合物因其高效的靶向识别能力、丰富的活性结合位点和优越的吸附/解吸附动力学性能,日益受到分离和分析化学领域研究者的广泛关注。本文系统介绍表面印迹技术的概况,如机理、分类、特点等,重点综述了表面印迹技术在环境分析、食品分析、生物分析和医药分析等领域的研究运用现状,并对表面印迹技术潜在的研究方向和应用前景进行了展望。