Optical corrosion meter

In a previous study, a mathematical model relating surface and bulk behaviours of metals in aqueous solution has been developed. The model was established based on principles of holographic interferometry for measuring microsurface dissolution, i.e. mass loss, and on those of electrochemistry for measuring the bulk electronic current, i.e. corrosion current. In the present work, an optical corrosion meter was built based on the above model. The corrosion meter consists of an electrochemical cell in which the sample is immersed in aqueous solution. Furthermore, the corrosion meter has a holographic camera with a thermoplastic film for in situ processing of holograms in order to obtain real-time holographic interferoms of the sample in the electrochemical cell. Results of the present work indicate that optical holography is a very useful technique for measuring the corrosion current density of different alloys in aqueous solutions. As a result, the corrosion current density of aluminium, stainless steel, and low-carbon steel in 1 M KCl, 1 M NaCl, and 1 M NaOH solutions were obtained. A comparison between the corrosion data of samples showed that the corrosion current density of the stainless steel in 1 M NaCl is nearly three-folds higher than that of the aluminium in 1 M KCl and the low-carbon steel in 1 M NaOH.     

New Classes of Toda Soliton Solutions

We provide a detailed investigation of limits of N–soliton solutions of the Toda lattice as N tends to infinity. Our principal results yield new classes of Toda solutions including, in particular, new kinds of soliton–like (i.e., reflectionless) solutions. As a byproduct we solve an inverse spectral problem for one–dimensional Jacobi operators and explicitly construct tri–diagonal matrices that yield a purely absolutely continuous spectrum in (-1,1) and give rise to an eigenvalue spectrum that includes any prescribed countable and bounded subset of . Received: 16 October 1995/Accepted: 23 July 1996     

Luminescence properties of anodic aluminum oxide films with organic luminophores embedded into pores

Luminescence properties of porous anodic aluminum oxide films formed in a 0.6 M solution of citric acid and luminescence of paraterphenyl, perylene, coumarin 7, and rhodamine 6G dyes adsorbed by the films are investigated. The nature of emitting centers in anodic aluminum oxide is revealed. Intense photoluminescence of all tested dyes embedded into pores of anodic aluminum oxide has been found. A redshift of fluorescence spectra of dyes adsorbed by the matrix and emergence of an additional longwave band have been detected. Data obtained can be used in developing new thin-film luminescent coatings for future applications in optoelectronics and molecular electronics. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No 4, pp. 483–488, July–August, 1997.     

The gas dynamics of current-limiting devices during immobility time

The aim of this paper is to extend our knowledge about the gas-dynamic processes in arcs during immobility time. For this purpose, the conservation equations in a magnetohydrodynamic approximation were coupled with the thermochemical and Maxwell equations. Special features arc the introduction of dissociation and ionization of nitrogen and oxygen, and the simultaneous calculation of the distributions of current density and magnetic induction in the arc. Numerical calculations were performed with a reduced two-dimensional (2-D) time-dependent model. Results of the calculations were compared with measurements. The development in time of the measured and calculated are voltage and arc chamber pressure show very good agreement. The pumping effect of the double vortex in the arc region was confirmed by optical measurements. It is concluded that the three-layer model is a good representation for the main physical features during the immobility time, and that the presence of highly conducting gas in the downstream region of the arc is essential for its downstream movement     

Classical versus Jennings model for the ground state of H near a metallic surface

We show that, contrary to earlier reports, application of the one-parameter variational technique to the classical (image) model for H in front of an Al surface leads to energy shifts for the ground state which are very close to those obtained numerically with a more sophisticated model of the system.     

Three-dimensional integrable models and associated tangle invariants

In this paper we show that the Boltzmann weights of the three-dimensional Baxter-Bazhanov model give representations of the braid group if some suitable spectral limits are taken. In the trigonometric case we classify all possible spectral limits which produce braid group representations. Furthermore, we prove that for some of them we get cyclotomic invariants of links and for others we obtain tangle invariants generalizing the cyclotomic ones.     

Measurement of cathode spot parameters with pulsed laserdiagnostics

The cathode spot formation in air within the first 170 ns was investigated by laser absorption photography and ps-pulse interferometry. The discharge was initiated between electrodes made from Ag or Pd with cathode-anode distance below 300 μm, the arc duration was some milliseconds, and the arc current 5-10 A. Picosecond holographic interferometry and momentary absorption photography yielded spatial-temporal density distributions in the ignition phase of the cathode spot. An absolute electron density value on the order of 4×10²⁶ m^-3 has been found. In contrast to vacuum, the cathode spot plasmas broaden little with increasing distance from the cathode, thus narrow plasma channels are observed in the vicinity of the cathode surface having diameters <20 μm     

On the integrability of hyperbolic systems of riccati-type equations

We consider equations of the form U_xy = U * U_x, where U(x, y) is a function taking values in an arbitrary finite-dimensional algebra T over the field ℂ. We show that every such equation can be naturally associated with two characteristic Lie algebras, L_x and L_y. We define the notion of a ℤ-graded Lie algebraB corresponding to a given equation. We prove that for every equation under consideration, the corresponding algebraB can be taken as a direct sum of the vector spaces L_x and L_y if we define the commutators of the elements from L_x and L_y by means of the zero-curvature relations. Assuming that the algebra T has no left ideals, we classify the equations of the specified type associated with the finite-dimensional characteristic Lie algebras L_x and L_y. All of these equations are Darboux-integrable. Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 113, No. 2, pp. 261–275, November, 1997.