高电荷态Ar^q＋与Ne碰撞中入射离子电荷交换截面的研究

报道Ar^q Ne(q=8，9，11，12)碰撞体系中多电子转移过程，得到了多组实验测量电荷交换截面数据，讨论入射离子电荷交换截面、反冲离子产生截面与入射离子电荷态、能量以及散射离子电荷态的关系，并且将实验结果与Ar^q Ar碰撞体系进行对比研究。在修正分子库仑过垒模型的基础上，对实验现象做了合理的解释。     

Speciation Analysis of Inorganic Tin (Sn(II)/Sn(IV)) by Graphite Furnace Atomic Absorption Spectrometry Following Ion-Exchange Separation

A new method based on anion exchange resin separation and graphite furnace atomic absorption spectrometry (GFAAS) detection is proposed for the determination of inorganic tin species. The result showed that Sn(IV) was quantitatively retained on the resin when [HCl] = 9.0 mol · L⁻¹, but Sn(II) could not be adsorbed on the resin under the same condition. Thus, a separation of Sn(II) and Sn(IV) has been realized. When the concentration of NaOH solution was between 2.0–7.0 mol · L⁻¹, Sn(IV) that adsorbed on the resin could be eluated from the resin completely. Meanwhile, under the atmosphere and the nitrogen states, the translation between Sn(II) and Sn(IV) was investigated. Under the optimal conditions, the detection limit of Sn(IV) is 0.40 μg · L⁻¹ with RSD of 2.3% (n = 5, c = 2.0 μg · L⁻¹). The proposed method was applied to the speciation analysis of tin in different water samples and the recovery of total Sn was in the range of 98.7–101.7%. In order to verify the accuracy of the method, a certified reference water sample was analyzed and the results obtained were in good agreement with the certified value.     

加热炉内板坯粘塑性下桡变形的研究

在加热妒内，由于高温及重力作用，板坯两端的悬臂将产生下桡变形。悬臂越长，下桡将越大，导致悬臂下桡部分与出口端墙相碰，影响出料而造成事故。本文对加热炉内板坯的下桡变形进行了分析计算。首先，建立了板坯的二维非稳态导热模型并用有限差分法计算了炉内板坯随时间的温度变化；然后建立了板坯悬臂粘塑性变形模型，用有限元法计算了高温条件下由重力引起的悬臂的下桡变形。由此理论模型计算出的板坯抽出温度与悬臂端下桡量与实测结果吻合良好，说明该理论模型及模型计算方法是正确的，可用于对装钢生产进行指导。     

On structure of small contractions of odd dimensional projective varieties

Let X be a smooth projective variety of dimension 2k-1 (k≥3) over the complex number field. Assume that fR: X→Y is a small contraction such that every irreducible component Ei of the exceptional locus of fR is a smooth subvariety of dimension k. It is shown that each Ei is isomorphic to the k-dimensional projective space Pk, the k-dimensional hyperquadric surface Qk in Pk 1, or a linear Pk-1-bundle over a smooth curve.     

药用植物化学分类法与红外指纹图谱的相关性研究

本文首次采用傅里叶变换红外光谱法(FTIR)对五加科、桔梗科、木兰科、樟科、豆科、蕨类等科目中的典型药用植物进行了系统研究,比较了各科内植物的异同,并且讨论了相同植物不同药用部位、不同采药时间对其红外谱图的影响。结合药典中关于药物主体有效成分的记载,分析了各药用植物谱图中主要成分的特征基团,对主要吸收峰进行了指认。在传统形态比较分类方法的基础上,FTIR可以成为一种快速、可靠、客观、有效的化学分类学的补充方法。     

深能级杂质对光导半导体开关非线性特性的影响

建立了非线性GaAs光导开关深能级杂质瞬态模型的基本方程,获得了与实验现象定性吻合的电流输出,给出了平均载流子随时间演化的情况.分析结果表明,在考虑了深能级杂质的俘获、发射和碰撞电离后,有可能对非线性光导开关中发生的一系列现象做出解释,进一步的仔细分析将对非线性光导开关的设计和制作提供理论指导.     

同轴双无衍射光的理论与实验

提出同轴双无衍射光的概念。如果两束汇聚角略有不同的同轴无衍射光同时存在，则它们相互之间叠加干涉后产生一种纵向呈周期变化的光场结构，这是一种新的光束空间分布，这种光束在横向仍是一种同心环光斑，可用于精密对准。而在不同纵向位置，这些同心环的强度分布是不同的，且是周期性变化的。同轴双无衍射光的轴向周期性可用于沿光束传播方向的定位。文中提出了双环缝法、分段圆锥透镜法、正弦相位环光栅法等实现同轴双无衍射光的理论与实验方法，分析了同轴双无衍射光的横向与纵向传播的衍射光斑特性，理论计算与实验测量的结果基本相符合。     

Testing for additivity with B-splines

Regression splines are often used for fitting nonparametric functions, and they work especially well for additivity models. In this paper, we consider two simple tests of additivity: an adaptation of Tukey's one degree of freedom test and a nonparametric version of Rao's score test. While the Tukey-type test can detect most forms of the local non-additivity at the parametric rate of O(n-1/2), the score test is consistent for all alternative at a nonparametric rate. The asymptotic distribution of these test statistics is derived under both the null and local alternative hypotheses. A simulation study is conducted to compare their finite-sample performances with some existing kernel-based tests. The score test is found to have a good overall performance.