离子束刻蚀技术研究

本文介绍了离子束刻蚀技术的原理,讨论了刻蚀速率与离子束流密度、离子能量和离子束入射角度的关系。实验结果与理论分析有较好的一致性。     

挤压-堆积复合法制备As2S3红外硫系玻璃光子 晶体光纤及其特性研究

在利用多极法优化设计光子晶体光纤结构的基础上, 充分结合挤压和堆积两种方法的优点, 提出了基于挤压-堆积的新型硫系光子晶体光纤制备技术, 利用As2S3硫系玻璃制备了三层孔环结构光子晶体光纤. 通过理论模拟分析得出了该光纤的色散特性和零色散点, 测试了1550nm近红外光纤激光在该光纤中的传输效果和纤芯光斑能量分布, 利用该光斑测试验证了该光纤在近红外的光能传输局部限制能力和光子晶体的光学初步控制现象.     

无穷维空间上随机偏微分方程的参数估计

对一类无穷维空间上带来未知参数的随机偏微分方程,基于连续样本轨道,给出了参数的极大似然估计,证明了当Fourier系数的个数趋于无穷时,参数估计量的强相合性和渐近正态性.     

Diffraction inhibition in two-dimensional photonic crystals

We show the existence of flat equal-frequency contour across the entire first Brillouin zone in two-dimensional photonic crystals. Under this condition, light diffraction can be inhibited. Moreover, the beam can be highly localized between two neighboring rows of the defect-free photonic crystal. Such a finding may have novel applications in light beam manipulations and on-chip integrated photonic devices.     

使用不同工质的会切磁场等离子体推力器

会切磁场等离子体推力器是一种利用磁镜约束等离子体产生推力的新型推力器,具有寿命长、推力大范围连续可调等优点,在无拖曳控制领域具有较大的应用前景.分别采用Xe,Kr和Ar三种不同工质,开展了会切磁场等离子体推力器实验.首先,对所用的推力器进行了简要的原理和设计介绍;然后,对三种工质的点火电压分别进行了测试,发现Xe是最容易点火成功的,Kr和Ar点火难度较大.在阳极电流、推力、效率和比冲等性能方面,三种工质在同等条件下也存在明显的区别.分析发现,三者的工质利用率高低导致了性能上的差别,通过提升通流密度能够大幅提升Kr和Ar的工质利用率.在羽流结构方面,法拉第测量结果表明三者都存在明显的空心羽流,且离子电流密度峰值出现的角度随着原子量的减小而逐渐减小.     

Image reconstruction tomography with only a method for laminar optical single Monte-Carlo simulation

Laminar optical tomography （LOT） is a new mesoscopic functional optical imaging technique. Currently, the forward problem of LOT image reconstruction is generally solved on the basis of Monte-Carlo （MC） methods. However, considering the nonlinear nature of the image reconstruction in LOT with the increasing number of source positions, methods based on MC take too much computation time. This letter develops a fast image reconstruction algorithm based on perturbation MC （pMC） for reconstructing the absorption or scattering image of a slab medium, which is suitable for LOT or other functional optical tomography system with narrow source-detector separation and dense sampling. To calculate the pMC parameters, i.e., the path length passed by a photon and the collision numbers experienced in each voxel with only one baseline MC simulation, we propose a scheme named as the trajectory translation and target voxel regression （TT＆TVR） based on the reciprocity principle. To further speed up the image reconstruction procedure, the weighted average of the pMC parameters for all survival photons is adopted and the region of interest （ROI） is extracted from the raw data to save as the prior information of the image reconstruction. The method is applied to the absorption reconstruction of the layered inhomogeneous media. Results demonstrate that the reconstructing time is less than 20 s with the X - Y section of the sample subdivided into 50 × 50 voxels, and the target size quantitativeness ratio can be obtained in a satisfying accuracy in the source-detector separations of 0.4 and 1.25 mm, respectively.     

γ辐射引发淀粉目由基衰减的动力学研究

用ESR方法研究了红薯淀粉在y射线预辐照下,产生的淀粉自由基特性及其室温下的自由基衰减动力学反应。结果表明在室温条件下,淀粉自由基的相对浓度随辐射剂量的增大而增加。自由基相对浓度的室温衰减用二级反应动力学处理,求得了衰减速率常数和淀粉自由基反应的半衰期。