壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

简便快速的硫化氢测定法

本文提出了有一种简易快速测定剂来测定水样中的硫化氢的方法。该法的检出限为０．１ｍｇ／Ｌ，对１．０１ｍｇ／Ｌ的Ｈ２Ｓ样品７次测定的相对标准偏差＜４．１％，１ｈ能测定１２个样品。用本测定了几种水样中的Ｈ２Ｓ含量，回收率为８４％－１０５％。应用它可上标准法的４ｈ左右缩短到５ｍｉｎ；使分析成本降低９／１０；不需配制一系列分析试剂和仪器，只需一支小型塑料管和几片药片，便于渔业水质和环境水质的野外现场监测。     

Preparation of Z-L-Phe-OH-NBD imprinted microchannel and its molecular recognition study

An integrated microchip was presented for selective recognition of Z-L-Phe-OH-NBD, using molecular imprinting technique. Molecularly imprinted polymer (MIP) were prepared by copolymerization in the presence of template molecule Z-L-Phe-OH-NBD, in which methacrylic acid and 4-vinylpyridine were used as functional monomers and ethylene dimethacrylate used as crosslinker. Imprinted polymer particles were introduced into a microchannel fabricated with a new material i.e. poly(methylvinylsiloxane) by simply rapid prototyping method. Imprinted effects were evaluated by laser-induced fluorescence (LIF) detection where the results indicated that good selective recognition for Z-L-Phe-OH-NBD in the imprinted polymer was obtained; the adsorption percentage of Z-L-Phe-OH-NBD was 61%. In contrast to conventional molecular imprinting analysis, integration shortened overall analysis time from 4h to 10 min.     

Cu，Pd－ZSM－5上NO分解和CO氧化的催化作用

双交换Ｃｕ，ｐｄ－ＺＳＭ－５催化剂（Ｃｕ交换度为１０５％，Ｐｄ交换度分别为３．４％和３３％）对ＣＯ氧化反应有活性增强作用，对ＮＯ分解反应不存在增强效应．双交换催化剂在于交换程序不同，而表面物种不同，活性组分的分布状态不同，因而有不同的活性．先交换Ｃｕ，４００℃焙烧后再交换ｐｄ的Ｃｕ－Ｐｄ－ＺＳＭ－５催化剂，对上述两类反应的活性存双组分催化剂中均为最高．Ｈ_２－ＴＰＲ谱表明，共交换的Ｃｕ－Ｐｄ－ＺＳＭ－５中尚有部分ＣｕＣｌ＋占据了部分交换位置，而使ＣＯ氧化活性稍有下降．Ｎ_２－ＤＴＡ和Ｈ_２－ＴＰＲ谱结果表明，Ｐｄ交换到Ｃｕ－ＺＳＭ－５中后，抑制了吸附水和水合铜化合物的形成，由此提高了在２００—３００℃时氧的吸附量．后者的大小和ＣＯ氧化活性有顺变关系．Ｎ_２－ＤＴＡ谱中３４０—４４５℃的放热峰可能分别表征了和ＮＯ分解活性有关的铜氧桥或把氧桥的形成，该放热峰的峰温愈低，峰面积愈大，则ＮＯ分解活性愈高．     

FT–IR microspectroscopy study of blends of ester functionalized ethylene–propylene copolymer with (vinylidene fluoride-hexafluoropropene) elastomer

An ethylene—propylene (EPR) copolymer functionalized with (1,2-dicarboethoxy)ethyl groups has been blended with a vinylidene fluoride—hexafluropropene elastomer (NML). The existence of intermolecular interactions involving mainly the carbonyl groups of the side chains of the functionalized copolymer and the methylene hydrogens of the fluoroelastomer through hydrogen bonding was shown by means of FT—IR spectroscopy. The structure and composition of some microdomains in the mixture was examined by means of FT—IR microspectroscopy.     

碳酸氢铵沉淀法制备氧化钇粉体时反应条件对产物粒度的影响

研究了碳酸氢铵沉淀法的反应条件对氧化钇粒度的影响,探讨了粒度变化规律。发现在沉淀反应中,晶型碳酸钇铵的形成与否是影响氧化钇粒度的关键因素。在较低的反应温度下,当碳酸氢铵和氯化钇的浓度大于0.25mol·L-1,摩尔比大于5,陈化时间大于60min时得到碳酸钇铵沉淀,经煅烧可获得粒度(D50)大于1μm的氧化钇。当反应物浓度较低、摩尔比小,陈化时间较短时得到无定型碳酸钇沉淀,煅烧沉淀可获得粒度(D50)小于0.5μm的氧化钇。实验证明选择适当的沉淀反应条件,可制备D50在0.3～10μm范围内的不同粒度级别的氧化钇粉体。     

Selective dimerization of α-methylstyrene catalyzed by a solid acid

A novel solid acid prepared from concentrated sulfuric, boric and phosphoric acid is a highly selective catalyst for the dimerization of α-methylstyrene at room temperature to generate 4-methyl-2,4-diphenyl-1-pentene.     

Fabrication of ultrathin films with large third-order nonlinear optical properties.

An ultrathin composite film containing anionic Ag-His complexes (His: L-Histidine) and oppositely charged BH-PPV was fabricated by means of the electrostatic layer-by-layer self-assembly technique. UV/Vis spectra showed a continuous deposition process of Ag-His complexes and BH-PPV. The film structure was characterized by using small-angle X-ray diffraction, AFM, and SEM. The nonlinear optical properties of the ultrathin film were studied by using the Z-scan technique with a laser duration of 8 ns at a wavelength of 532 nm. The film sample exhibited a strong nonlinear saturated absorption, with an alpha2 value of -3.9 x 10(-5) mW(-1) and a self-defocusing effect with an n2 value of -4.78 x 10 (-12) m2W(-1).