Towards Single-component Molecular Conductor [Ni(dmit)_2] by Charge Disproportionation:2[Ni(dmit)_2]~(-0.5)[Ni(dmit)_2]+[Ni(dmit)_2]~-

It was commonly thought that a molecular conductor or semiconductor should be composed of at least two components to make the conducting component in partially charged state. However, this idea became questionable by the recent report of the single-component molecular conductor [Ni(tmdt)2]1 as well as several reports about single-component molecular semiconductors such as [Ni(ptdt)2]2 and [Ni(C10H10S8)2]3. In fact, as early as 1985, [Ni(dmit)2] as a by-product in synthesizing TTF[Ni(dmit…     

A study of the gold/aqueous electrolyte interphase by modulated reflection spectroscopy

The admittance and differential reflectivity of an electrode of polycrystalline gold in contact with aqueous 0.02 M NaF, KClO₄, 0.01 M Na₂SO₄ and KCl have been measured in the range of potential where the electrode is ideally polarized (?0.7 V to 0.8 V NHE). In NaF and KClO₄ evidence was obtained for the compression of the adsorbed layer of water. The increase of the number of water molecules, with respect to the number in the least original state (at?4μC cm^?2), is 3% at +8 μC cm^?2 and at?17 μC cm^?2. At the potential of zero charge the water dipoles are oriented preferentially with the oxygen towards the metal. In KCl the optical measurements confirm the existence of two types of Au?Cl^? interaction and the covalent character of the bond at the most positive charges.     

Synthesis of PI3K inhibitor GDC-0077 via a stereocontrolled N-arylation of α-amino acids

An efficient synthesis of PI3K inhibitor GDC-0077, featuring two consecutive Cu-catalyzed CN coupling reactions, is reported. The described synthetic route involves a chemoselective Ullmann-type coupling of a chiral difluoromethyl-substituted oxazolidinone, a Cu-catalyzed N-arylation of l-alanine with high stereochemical integrity, and a high-yielding final amide bond formation step to produce GDC-0077 in >99.5 area % HPLC purity.     

A laser desorption fourier transform mass spectrometric study of dimethyl 8-acetyl-3,7,12,17-tetramethylporphyrin-2,18-dipropanoate

Laser desorption Fourier transform ion cyclotron resonance positive- and negative-ion mass spectra are presented for dimethyl 8-acetyl-3,7,12,17-tetramethylporphyrin-2,18-dipropanoate. The 248-nm laser ionization thresholds for both positive and negative ions are observed to be about 2.5 MW cm^?2. The M⁺˙ molecular ion is assigned to the base peak in the low-power spectra whereas it is the M^?˙ ion for the corresponding anion spectra. Increased intensities of [M + H]⁺ and [M ? H]^? are observed with increased laser fluences of up to 38 MW cm^?2. At high laser powers the negative-ion results reveal that a series of carbon-nitrogen cumulene and polyacetylene cluster ions are formed. Laser evaporation/multiphoton ionization/ and thermal evaporation/electron impact ionization/collision-induced dissociation experiments carried out on the porphyrin M⁺˙ and [M + H]⁺ ions over a range of translational kinetic energies and delay times after acceleration are compared and used to obtain mechanistic and structural information. In contrast to the electron impact experiments, which show only side-chain cleavage, the laser-based collision-induced dissociation experiments reveal that, in addition to side-chain cleavage, it is possible to cleave the porphyrin ring to various extents depending on the ion translational energy selected.     

Access to 2-fluoroacrylates and their 3-chloro derivatives by chemical hydrogenolysis of 3,3-dichloro-2-fluoroacrylates

The formation of 3-chloro-2-fluoroacrylates 2 and 2-fluoroacrylates 3 by hydrogenolysis of 3,3-dichloro-2-fluoroacrylates 1 was studied by using Bu₃SnH, zinc, the sodium sulphite/sodium formate mixture or iron pentacarbonyl in the presence of a hydrogen donor (Et₃SiH or CH₃OH). The two last couples can be used to prepare the 3-chloro derivatives 2, whereas for the preparation of the 3,3-dihydro derivatives 3, zinc is the most appropriate reducing agent. Keywords: 2-Fluoroacrylate; 3-Chloro-2-fluoroacrylate; 3,3-Dichloro-2-fluoroacrylate; Tributyltin hydride; Zinc; Sodium sulphite; Sodium formate; Iron pentacarbonyl; NMR spectroscopy; IR spectroscopy     

Synthesis and spectral characterization of some complexes of platinum(II) containing η-methyleugenol

Several complexes of the formula trans-[Pt(Meug)(Am)Cl₂], Meug: methyleugenol (4-allyl-1,2-dimethoxybenzene), a η²-coordinated olefin, and Am: ammine, methylamine, diethylamine, o-toluidine, m-toluidine, p-toluidine, o-anisidine, m-anisidine and p-anisidine have been prepared. UV, IR, Raman, ¹H NMR, ¹³C NMR and 2D NMR spectra of the complexes were recorded and analyzed.     

Cationic polymerization of dienes VII. New electron donors in the polymerization of 1,3-pentadiene initiated by aluminum trichloride in non-polar solvent

The aim of this research was to investigate new bulky electron donors (EDs) generating hindered active species in the cationic polymerization of 1,3-pentadiene initiated by AlCl₃ in pentane, in order to avoid or strongly reduce the reaction between the active species and the double bonds of the polymer which are responsible for side reactions. At room temperature, the polymerization in the presence of new ED, such as OPh₂, N(PhBr)₃, NPh₃ and SPh₂, allowed to obtain higher conversions and lower insoluble fractions than without electron donor. The formation of a complex ED/AlCl₃ was shown for each electron donor. However, in the case of NPh₃ and SPh₂, variations of the polymer microstructure demonstrated an interaction between active species and these EDs. Similar results were obtained at lower temperature (−10 °C). The beneficial effect of the presence of electron donors such as NPh₃ and SPh₂ demonstrated the validity of the concept of sterically hindered active species, but the polymerization was still uncontrolled.     

A sensitive and specific method for the determination of total ribavirin in human red blood cells by liquid chromatography-tandem mass spectrometry

A sensitive and specific method using high-performance liquid chromatography (LC)-tandem mass spectrometry (MS) for the analysis of total ribavirin in human red blood cells (RBC) is developed and validated. The method involves the addition of an internal standard and perchloric acid, the conversion of ribavirin phosphorylated metabolites to ribavirin, purification with a solid-phase exchange cartridge, and LC-MS-MS analysis. The MS-MS is selected to monitor m/z 245-113 for ribavirin and m/z 250-113 for [13C]ribavirin using positive electrospray ionization. The calibration curve is linear over a concentration of 100-10,000 ng/mL with a limit of quantitation of 100 ng/mL. Mean interassay accuracy for quality control (QC) at 100, 1000, and 10,000 ng/mL are 101.8%, 99.4%, and 98.8%, respectively. Mean interassay precision (%CV) for QC at 100, 1000, and 10,000 ng/mL are 5.0%, 5.0%, and 2.5%, respectively. Extractibility of total ribavirin from RBC is confirmed with RBC obtained from a [(14)C]ribavirin-dosed monkey. The method is used to determine the free and total ribavirin concentration in human RBC obtained from hepatitis C patients treated with ribavirin.     

Measurement and Identification of (R)- and (S)-6-O-Desmethylnaproxen Enantiomers as Diastereomeric O-Ethoxycarbonyl/(R)-(+)-1-Phenylethylamides in Urine by GC and GC-MS

Enantioseparations of (R)- and (S)-6-O-desmethylnaproxens as O-ethoxycarbonyl/(R)-(+)-1-phenylethylamides and (R)- and (S)-naproxens as (R)-(+)-1-phenylethylamides were achieved by achiral gas chromatography in a single run within 11 min. The characteristic mass spectral patterns facilitated easier peak identification. The method for determinations of (R)-naproxen (1.0 to 50 ng) and (S)-naproxen (100 to 2000 ng) was linear with acceptable repeatability and accuracy. The enantiomeric composition ratios between (R)- and (S)-6-O-desmethylnaproxens and between (R)- and (S)-naproxens in urine sample collected six hours after oral administration of (S)-naproxen tablets were measured to be 2.2 (± 0.2):97.8 (± 0.2) and 2.1 (± 0.1):97.9 (± 0.1), respectively.