Simultaneous determination of p-hydroxybenzoic acid and parabens by capillary electrophoresis with improved sensitivity in nonaqueous media

New methods based on nonaqueous capillary electrophoresis (NACE) were developed as promising alternatives for the simultaneous separation and determination of p-hydroxybenzoic acid (PHBA) and a group of parabens (methyl, ethyl, propyl, butyl and benzyl p-hydroxybenzoates), with good resolution and excellent sensitivity. As an effective on-line preconcentration technique, large-volume sample stacking (LVSS) was successfully combined with NACE allowing significant sensitivity enhancement. Identification and quantification of the analytes were performed by diode array detection (DAD). The influence of different parameters, such as buffer apparent pH, concentration of electrolyte, temperature, applied voltage and sample volume, on the efficiency, resolution and sensitivity of the electrophoretic separation was studied. The analytical performance was evaluated, and both NACE-DAD and LVSS-NACE-DAD methods showed good linearity, precision and instrumental LODs at low ng/mL levels. These LODs were compared with those described in the literature, and it was found that NACE-DAD method was comparable to GC-MS, while LVSS-NACE-DAD procedure achieved sensitivity similar to LC-MS, LC-MS/MS and GC-MS/MS, even using conventional ultraviolet-visible absorption detection. To test their suitability, proposed methods were evaluated for the analysis of PHBA and parabens at low and sub-ng/mL levels in environmental water samples.     

Ultrafast Deactivation Mechanism of the Excited Singlet in the Light‐Induced Spin Crossover of [Fe(2,2′‐bipyridine)3]2+

The mechanism of the light‐induced spin crossover of the [Fe(bpy)₃]²⁺ complex (bpy=2,2′‐bipyridine) has been studied by combining accurate electronic‐structure calculations and time‐dependent approaches to calculate intersystem‐crossing rates. We investigate how the initially excited metal‐to‐ligand charge transfer (MLCT) singlet state deactivates to the final metastable high‐spin state. Although ultrafast X‐ray free‐electron spectroscopy has established that the total timescale of this process is on the order of a few tenths of a picosecond, the details of the mechanisms still remain unclear. We determine all the intermediate electronic states along the pathway from low spin to high spin and give estimates for the deactivation times of the different stages. The calculations result in a total deactivation time on the same order of magnitude as the experimentally determined rate and indicate that the complex can reach the final high‐spin state by means of different deactivation channels. The optically populated excited singlet state rapidly decays to a triplet state with an Fe d⁶(${{\rm t}{{5\hfill \atop {\rm 2g}\hfill}}}$ ${{\rm e}{{1\hfill \atop {\rm g}\hfill}}}$ ) configuration either directly or by means of a triplet MLCT state. This triplet ligand‐field state could in principle decay directly to the final quintet state, but a much faster channel is provided by internal conversion to a lower‐lying triplet state and subsequent intersystem crossing to the high‐spin state. The deactivation rate to the low‐spin ground state is much smaller, which is in line with the large quantum yield reported for the process.     

Guest Modulation of Spin‐Crossover Transition Temperature in a Porous Iron(II) Metal–Organic Framework: Experimental and Periodic DFT Studies

The synthesis, structure, and magnetic properties of three clathrate derivatives of the spin‐crossover porous coordination polymer {Fe(pyrazine)[Pt(CN)₄]} ( 1 ) with five‐membered aromatic molecules furan, pyrrole, and thiophene is reported. The three derivatives have a cooperative spin‐crossover transition with hysteresis loops 14–29 K wide and average critical temperatures T_c=201 K ( 1?fur ), 167 K ( 1?pyr ), and 114.6 K ( 1?thio ) well below that of the parent compound 1 (T_c=295 K), confirming stabilization of the HS state. The transition is complete and takes place in two steps for 1?fur , while 1?pyr and 1?thio show 50 % spin transition. For 1?fur the transformation between the HS and IS (middle of the plateau) phases occurs concomitantly with a crystallographic phase transition between the tetragonal space groups P4/mmm and I4/mmm, respectively. The latter space group is retained in the subsequent transformation involving the IS and the LS phases. 1?pyr and 1?thio display the tetragonal P4/mmm and orthorhombic Fmmm space groups, respectively, in both HS and IM phases. Periodic calculations using density functional methods for 1?fur , 1?pyr , 1?thio , and previously reported derivatives 1?CS₂ , 1?I, 1?bz (benzene), and 1?pz (pyrazine) have been carried out to investigate the electronic structure and nature of the host–guest interactions as well as their relationship with the changes in the LS–HS transition temperatures of 1?Guest . Geometry‐optimized lattice parameters and bond distances in the empty host 1 and 1?Guest clathrates are in general agreement with the X‐ray diffraction data. The concordance between the theoretical results and the experimental data also comprises the guest molecule orientation inside the host and intermolecular distances. Furthermore, a general correlation between experimental T_c and calculated LS–HS electronic energy gap was observed. Finally, specific host–guest interactions were studied through interaction energy calculations and crystal orbital displacement (COD) curve analysis.     

Efficient Synthetic Approach to Substituted Benzo[b]furans and Benzo[b]thiophenes by Iodine‐Promoted Cyclization of Enaminones

An efficient synthetic approach to the substituted benzo[b]furan and benzo[b]thiophene scaffolds by iodine‐mediated cyclization of the corresponding enaminones is described. This protocol was applied to a large series of these latter precursors to afford the respective benzoheterocycles substituted at the C‐2 position by a carbonyl group functionality. A study of the factors that control this process reveals that the reactivity depends on the presence of electron‐donor groups in the aryl ring of the aryloxycarbonylic and arylthiocarbonylic moieties.     

Carbocation catalysis in confined space: activation of trityl chloride inside the hexameric resorcinarene capsule

Carbocation catalysis can be performed inside the confined space of the hexameric resorcinarene capsule. The inner cavity of the capsule can host the trityl carbocation, which catalyses the Diels–Alder reaction between dienes and unsaturated aldehydes. Experimental results and in silico calculations show that the hexameric resorcinarene capsule C₆ can promote the formation of the trityl carbocation from trityl chloride through the cleavage of the carbon–halogen bond promoted by OH⋯X⁻ hydrogen bonding. Here it is shown that the combination of the nanoconfined space and the latent carbocation catalysis provides a convenient complementary strategy for the typical carbocation catalysis. The latent strategy bypasses the typical pitfalls associated with active carbocations and provides control of the reaction efficiency in terms of reaction rate, conversion, and selectivity.

The hexameric resorcinarene capsule is able to promote carbocation catalysis inside its cavity.     

Spatial and temporal variations of the inherent and apparent optical properties in a shallow coastal lake

Apparent and inherent optical properties in the coastal lagoon of Fogliano were measured in three seasonal surveys in 2002. Irradiance data from in situ measurements of ultraviolet and visible wavebands permitted to estimate the related attenuation coefficients. Laboratory extinction measurements on filtered (0.22 microm) and unfiltered water samples were also performed. The integrated approach between in situ and laboratory measurements allowed the determination of the role of the suspended and dissolved matter in the attenuation and extinction of ultraviolet and visible radiation within the water column. As noted, the impact of the suspended and dissolved matter on the lake optical quality was influenced by wind resuspension of particulate matter: the relative role of dissolved matter in the absorption of UV and visible radiation was prevailing at low wind velocity conditions (less than 2.2 m s(-1)), while at high wind velocities (3.9 m s(-1)), particulate matter resuspension strongly influenced the attenuation and the extinction measurements. The extinction in the analyzed wavelengths of filtered and unfiltered water samples and the in situ irradiance measurements allowed us to define new optical parameters and important correlations with limnological and classical optical measurements. By sampling at high spatial resolution (18 stations in 4 km2), it was possible to evidence a spatial gradient of the optical and limnological properties, these distributions showed a consistent pattern in all three surveys, and were important for the characterization of the chromophoric dissolved organic matter that was estimated with the spectral slope of the extinction curve spectra. A relatively higher spectral slope was found in the southern basin with respect to the northern, where the maximum values of the attenuation coefficients and limnological parameters were found. These results suggest different sources of dissolved organic matter and/or a different level of photobleaching.     

Acetylene cyclotrimerization by early second-row transition metals in the gas phase. A theoretical study

The acetylene cyclotrimerization reaction mediated by the left-hand-side bare transition metal atoms Y, Zr, Nb, and Mo has been studied theoretically, employing DFT in its B3LYP formulation. The complete reaction mechanism has been analyzed, identifying intermediates and transition states. Both the ground spin state and at least one low-lying excited state have been considered to establish whether possible spin crossings between surfaces of different multiplicity can occur. Our results show that the overall reaction is highly favorable from a thermodynamic point of view and ground state transition states lie always below the energy limit represented by ground state reactants. After the activation of two acetylene molecules and formation of a bis-ligated complex, the reaction proceeds to give a metallacycle intermediate, as the alternative formation of a cyclobutadiene complex is energetically disfavored. All the examined reaction paths involve formation of a metallacycloheptatriene intermediate that in turn generates a metal-benzene adduct from which finally benzene is released. Similarities and differences in the behaviors of the considered four metal atoms have been examined.     

Pressure-tuning of magnetism and linkage isomerism in iron(II) hexacyanochromate

A pressure-induced linkage isomerization of the cyanide anion has been observed in single crystals of a chromium(III)-iron(II) Prussian blue analogue of formula K0.4Fe4[Cr(CN)6]2.8 square1.2.16H2O (1). Upon application of pressure in the 0-1200 MPa range, the cyanide ligand rotates and becomes C-bonded to the iron(II) cations, leading to a stabilization of their diamagnetic low-spin states. The result is a decrease of magnetization and magnetic ordering temperatures from TC = 19 K at ambient pressure to 13 K at 1200 MPa. The initial magnetic properties can be restored on pressure release. The reversible movement of cyanide in the solid state can be exploited as a switch of the magnetic interaction at the molecular level.     

Synthesis of a Tyr-octreotate conjugated closo-carborane [HC2B10H10]: a potential compound for boron neutron capture therapy

A novel Tyr³-octreotate conjugated closo-carborane as a potential compound for boron neutron capture therapy was obtained via Fmoc solid phase peptide synthesis. The boron cluster [C₂B₁₀H₁₁] was introduced through the reaction of 6,9-bis(acetonitrile)decaborane and 5-hexynoic acid yielding a new closo-carborane conjugated carboxylic acid which was coupled subsequently with solid phase conjugated Tyr³-octreotate. The final boron-containing peptide was purified by preparative reverse phase HPLC and structural identity was proved applying MALDI-TOF mass spectrometry.     

Depth profiling of polymer films by confocal Raman spectroscopy

Confocal Raman microspectroscopy has many potential applications in the study of polymer-solvent interactions, including the determination of solvent and polymer-solvent complex depth profiles. This contribution focuses on preventing the formation of polymer-solvent complexes, using surface chemical modification of PVC films. While the surface-specific nature of the film modification is easily demonstrated,^[1] confocal Raman measurements clearly show the effects of film refractive index: the modifier depth profile shows a lack of symmetry and the film thickness is underestimated. A spectral normalisation method is described, and this is shown to result in a modifier depth profile which is in good agreement with data obtained by Raman microspectroscopy following physical cross-sectioning of a sample. Alternative techniques for Raman depth profiling are also discussed.