Synthesis, Electrochemistry and Crystal Structure of the [Ni36Pt4(CO)45]6− and [Ni37Pt4(CO)46]6− Hexaanions

The [Ni₃₆Pt₄(CO)₄₅]^6- and [Ni₃₇Pt₄(CO)₄₆]^6- clusters have been obtained in mixture upon reaction in acetonitrile of [Ni₆(CO)₁₂]^2- salts with K₂PtCl₄ in a 2.5:1 molar ratio. The two hexaanions were indistinguishable by spectroscopic techniques. Crystallization of their trimethylbenzylammonium salts led to crystals of composition 0.5[NMe₃CH₂Ph]₆[Ni₃₆Pt₄(CO)₄₅]-0.5[NMe₃CH₂Ph]₆[Ni₃₇Pt₄(CO)₄₆]·C₃H₈O, hexagonal,space group P6₃ (No. 173), a=17.853(9), c=27.127(13) Å, Z=2; final R=0.057. The metal core of the [Ni₃₆Pt₄(CO)₄₅]^6- anion consists of a Pt₄ tetrahedron fully encapsulated in a shell of 36 Ni atoms belonging to a very distorted and incomplete ₅ tetrahedron. The [Ni₃₇Pt₄(CO)₄₆]^6- hexaanion derives from the former by capping the unique triangular face of the metal polyhedron with an additional Ni(CO) fragment. The [Ni₃₆Pt₄(CO)₄₅]^6--[Ni₃₇Pt₄(CO)₄₆]^6- mixture is rapidly degraded to the known [Ni₉Pt₃(CO)₂₁]^4- cluster by exposure to carbon monoxide. Its reaction with protic acids initially affords the corresponding [H_6-nNi₃₆Pt₄(CO)₄₅]^n--[H_6-nNi₃₇Pt₄(CO)₄₆]^n- (n=5, 4) derivatives, and eventually leads to rearrangement to the known [H_6-n Ni₃₈Pt₆(CO)₄₈]^n- species. Both [Ni₃₆Pt₄(CO)₄₅]^6--[Ni₃₇Pt₄(CO)₄₆]^6- and [HNi₃₆Pt₄(CO)₄₅]^5--[HNi₃₇Pt₄(CO)₄₆]^5- mixtures have been chemically and electrochemically reduced to their corresponding [Ni₃₆Pt₄(CO)₄₅]^n--[Ni₃₇Pt₄(CO)₄₆]^n- (n=7–9) and [HNi₃₆Pt₄(CO)₄₅]^n--[HNi₃₇Pt₄(CO)₄₆]^n- (n=6–8) mixtures.     

Liquid chromatographic/electrospray ionization tandem mass spectrometric study of the phenolic composition of cocoa (Theobroma cacao)

Liquid chromatography coupled with ionspray mass spectrometry in the tandem mode (LC/MS/MS) with negative ion detection was used for the identification of a variety of phenolic compounds in a cocoa sample. Gradient elution with water and acetonitrile, both containing 0.1% HCOOH, was used. Standard solutions of 31 phenolic compounds, including benzoic and cinnamic acids and flavonoid compounds, were studied in the negative ion mode using MS/MS product ion scans. At low collisional activation, the deprotonated molecule [M - H](-) was observed for all the compounds studied. For cinnamic and benzoic acids, losses of CO(2) or formation of [M - CH(3)](-*) in the case of methoxylated compounds were observed. However, for flavonol and flavone glycosides, the spectra present both the deprotonated molecule [M - H](-) of the glycoside and the ion corresponding to the deprotonated aglycone [A - H](-). The latter ion is formed by loss of the rhamnose, glucose, galactose or arabinose residue from the glycosides. Different fragmentation patterns were observed in MS/MS experiments for flavone-C-glycosides which showed fragmentation in the sugar part. Fragmentation of aglycones provided characteristic ions for each family of flavonoids. The optimum LC/MS/MS conditions were applied to the characterization of a cocoa sample that had been subjected to an extraction/clean-up procedure which involved chromatography on Sephadex LH20 and thin-layer chromatographic monitoring. In addition to compounds described in the literature, such as epicatechin and catechin, quercetin, isoquercitrin (quercetin-3-O-glucoside) and quercetin-3-O-arabinose, other compounds were identified for the first time in cocoa samples, such as hyperoside (quercetin-3-O-galactoside), naringenin, luteolin, apigenin and some O-glucosides and C-glucosides of these compounds.     

Determination of the insecticide fenoxycarb in apple leaf samples by an enzyme-linked immunosorbent assay

An enzyme-linked immunosorbent assay (ELISA) was used for the determination of fenoxycarb in apple leaf samples. Single step extraction procedures with phosphate-citrate buffered solution containing different amounts of methanol were tested showing that a solvent percentage of 20% (v/v) was the best condition, with recoveries between 85 and 100% in the working range of 25-500 μg kg⁻¹ and a negligible matrix effect. The low detection limit reached, 1 μg kg⁻¹ against 50 μg kg⁻¹ for the recommended liquid chromatographic method, makes the ELISA more suitable for determinations of the fenoxycarb residues in apple leaf samples. The reliability of the ELISA was evaluated by assaying the insecticide in spiked and contaminated samples by three different approaches: direct determination, standard addition method with a calibration graph, and the dilution test. The corresponding coefficients of variation were, respectively, 11, 22 and 27%. The direct determination on the (1+1) diluted apple leaf extract was used to measure the insecticide residues in samples collected in the north-eastern Italian regions of Veneto and Trentino-Alto Adige.     

Defect and dopant properties of MgTa2O6

Atomistic computer simulation techniques have been used, for the first time, to reproduce the crystal structure of MgTa₂O₆ and to investigate the defect chemistry and dopant properties of this material. The calculated defect energetics suggest that the concentration of intrinsic atomic defects in this phase is insignificant and that the system is probably stable to both oxidation and reduction. Dopant solution energy versus ion size trends are found for both isovalent and aliovalent dopant incorporation at Mg and Ta sites. Divalent dopants (e.g. Ca, Cu) preferentially occupy the Mg site whereas dopants with higher charge (e.g. Sc, Zr, Nb) are more favorable on the Ta site. High migration activation energies (>2 eV) predict limited ionic conductivity in this material.     

Complete 1H and 13C NMR assignments of aurasperone A and fonsecinone A, two bis-naphthopyrones produced by Aspergillus aculeatus

Complete assignments of 1H and 13C NMR chemical shifts of the polyketides aurasperone A and fonsecinone A were made by means of nuclear Overhauser enhancement and heteronuclear NMR correlation experiments. These compounds were isolated for the first time from Aspergillus aculeatus, an endophytic fungus obtained from leaves of Melia azedarach(Meliaceae).     

Intramolecular [4 + 2] cycloadditions of 1,3-enynes or arylalkynes with alkenes with highly reactive cationic phosphine Au(I) complexes

New Au(I) complexes with bulky, biphenyl phosphines are the most reactive catalysts for the cyclizations of enynes. 1,6-Enynes with an aryl ring at the alkyne give 2,3,9,9a-tetrahydro-1H-cyclopenta[b]naphthalenes by a 5-exo-dig cyclization followed by a Nazarov-type ring expansion. 1,8-Dien-3-ynes also cyclize by a 5-exo-dig pathway to form hydrindanes.     

Effect of the Media on the Quantum Yield of Singlet Oxygen (O2(1Δg)) Production by 9H‐Fluoren‐9‐one: Solvents and Solvent Mixtures

We have investigated the effect of a series of 18 solvents and mixtures of solvents on the production of singlet molecular oxygen (O₂(¹Δ_g), denoted as ¹O₂) by 9H‐fluoren‐9‐one (FLU). The normalized empirical parameter E derived from E_T(30) has been chosen as a measure of solvent polarity using Reichardt's betaine dyes. Quantum yields of ¹O₂ production (Φ_Δ) decrease with increasing solvent polarity and protic character as a consequence of the decrease of the quantum yield of intersystem crossing (Φ_ISC). Values of Φ_Δ of unity have been found in alkanes. In nonprotic solvents of increasing polarity, Φ_ISC and, therefore, Φ_Δ decrease due to solvent‐induced changes in the energy levels of singlet and triplet excited states of FLU. This compound is a poor ¹O₂ sensitizer in protic solvents, because hydrogen bonding considerably increases the rate of internal conversion from the singlet excited state, thus diminishing Φ_Δ to values much lower than those in nonprotic solvents of similar polarity. In mixtures of cyclohexane and alcohols, preferential solvation of FLU by the protic solvent leads to a fast decrease of Φ_Δ upon addition of increasing amounts of the latter.     

Chemometric studies in the Lagoon of Venice, Italy. Annual evolution of sulphur species and relationship to biogeochemical cycles in lagoon water

During the period March 1997-March 1998 dimethyl sulphide (DMS), dimethylsulphoniopropionate (DMSP) and carbon disulphide (CS2) were determined weekly in the water of the Lagoon of Venice, Italy (at three stations located in the Giudecca Canal, the San Secondo Canal and the Rio di San Nicolò). At the same time, the following hydrological and biological variables were also measured: tide height, temperature, transmittance, fluorescence, pH, salinity, chlorinity, sulphate, ammonia, nitrite, nitrate, phosphate, silicate, chlorophyll a, phaeopigments, phytoplankton (abundance and biomass). Principal component analysis (PCA), applied as a dimension reduction tool, made it possible to summarize multivariate information in a small number of components, which highlighted the relationships between the temporal evolutions of the sulphur compounds with hydrological and biological variables in the seasonal biogeochemical cycle of the lagoon. In particular the overall temporal cycle, which begins with the development of biological activity in late winter and spring, followed by the predominance of degradation processes during the late summer and the remineralization of nutrients in autumn, is clearly described in the plane of the first two principal components, together with the interrelationships between all the relevant variables.     

Partitioning of metals between the aqueous phase and suspended insoluble material in fog droplets

This paper discusses the partitioning of metals (K, Na, Ca, Mg, Al, Cu, Fe, Pb and Zn) between the aqueous phase and the suspended insoluble material in fog samples collected in the Po Valley during two extensive fields campaigns. Metals represent on average 11% of the mass of suspended insoluble matter, while the main component is carbon (both organic carbon, OC = 35%, and black carbon, BC = 8%). The unaccounted suspended matter mass is very high, on average 46%, and is attributable to non metallic species, such as O and N and of Si. The principal metals in the insoluble suspended fraction are Fe and Al (2-5%), while the contributions of other metals (Na, Mg, Cu, Pb and Zn) are lower than 1%. Ca and K exhibited high blank values and could not be detected above blank detection limit threshold. The main components in the aqueous phase are NO3- (34%), WSOC (23%), SO4(2-) (18%) and NH4+ (19%), while trace metals and remaining cations and anions accounted for less than 1% of solute mass. The main dissolved trace metals in fog droplets are Zn, Al and Fe, while the main metallic cations are Na and Ca. Fe and Al are the only metals preferentially distributed in the suspended insoluble matter of fog droplets (partitioning ratio respectively 37% and 33%). All other metals are mostly dissolved in the aqueous phase (mean partitioning ratios of Mg, Pb, Zn, Cu and Na are 69%, 70%, 77%, 81% and 87%). These findings are in agreement with literature data on metal speciation in cloud and rain samples. The dependence of partitioning ratios on pH is investigated for the different metals, with only Al showing a clear partitioning ratio decrease with increasing pH. Conversely, the other metals show no dependence or a complex and highly variable behaviour. The partitioning ratio of iron (mean 37%) observed in the Po Valley fog samples is much higher than the water extractable iron in aerosol particles (typically 1-2 %): this fact can be explained by differences in the aerosol sources and composition among sites and by chemical processes in the aqueous phase, such as complexation and redox reactions involving organic ligands (oxalate, or other organic acids as humic-like organic matter) which may promote Fe solubility.     

Use of dicyclohexano-18-crown-6 to separate traces of silver(I) from potassium thiocyanate in hydrochloric acid media,and determination of the silver by atomic absorption spectrometry

Solvent extraction with 0.05 mol L(-1) dicyclohexano-18-crown-6 (DC18C6) in 1,2-dichloroethane, coupled with flame atomic absorption spectrometry (AAS), has been investigated as a new method for separation of trace amounts of silver(I) from 0.05 mol L(-1) potassium thiocyanate in 1.0 mol L(-1) hydrochloric acid media and quantification of the amount of silver present. The method is based on the formation of an extractable ion-association product, [DC18C6.K](+)[Ag(SCN)(2)](-), with a metal-to-crown ether ratio of 1:1 (as derived from slope analysis data). Stripping of the extracted silver(I) in the 1,2-dichloroethane phase was achieved within 5 min by use of 3.0 mol L(-1) potassium thiocyanate. Reducing the concentration of acid in the sample solution to 0.1 mol L(-1) improved the preconcentration factor severalfold. Excellent tolerance of the proposed method to the presence of foreign ions in solution with silver(I) was demonstrated. A detection limit of 13 ng mL(-1) was derived from the mean value of the blank plus three times its standard deviation. The method was used to determine traces of silver(I) after separation from gold(III), platinum(IV), and palladium(II) matrices on the basis of extractability differences with 18-membered crown ethers under specified conditions. The efficiency of the adopted ion-association mechanism for silver(I) extraction was apparent from the average recovery of 96% for spiked standards by use of the back-washing technique. The proposed extraction procedure was applied to the determination of traces of silver(I) in a selection of chemical reagents.