A combinatorial approach to obtain affinity media with binding properties towards the aflatoxins

In our work we performed a combinatorial solid-phase synthesis in aqueous medium to prepare peptide libraries from which to select an amino acid sequence with binding properties towards aflatoxins.We used polystyrene beads, functionalised with carboxylic groups as solid support and eight amino acids as monomers. During the first step 64 different sequences of two amino acids were prepared by exploiting the principles of combinatorial chemistry; then the binding properties of all sequences towards aflatoxin B(1 )were checked. We determined binding constants towards aflatoxin B(1) and towards aflatoxins B(2), G(1) and G(2). Results were promising, so we prepared a new library by using the selected dipeptide as the starting solid phase. After selecting the best tetrapeptide sequences, we determined binding constants towards the quoted aflatoxins. We obtained binding constants ( K>10(4) M(-1)) similar to those shown by human serum albumin for similar compounds. Preliminary studies on an extraction column were promising for the development of an SPE system and for its application in food matrices.     

π‐Facial Selectivity in the Formation of Tricarbonylchromium(0) Complexes of Estra‐1, 3, 5(10), 6‐tetraenes

The preparation of two η⁶‐estra‐1, 3, 5(10), 6‐tetraene tricarbonylchromium complexes 4 and 6 are described. In both cases only one stereoisomer can be isolated, in contrast to other estrane‐tricarbonylchromium complexes, where complexations are non‐stereoselective. X‐ray crystal structural analysis of 4 discloses that only the more sterically hindered β‐facial isomer is formed. It is assumed that the 6, 7‐olefinic moiety exerts a directive influence on the complexation.     

Positive ion chemistry of esters of carboxylic acids in air plasma at atmospheric pressure

Ionization of esters of carboxylic acids RCOOR' (R = H, alkyl; R' = alkyl) within the air plasma of the Atmospheric Pressure Chemical Ionization (APCI) source occurs largely via H(+)-transfer and, to a minor extent, via NO(+) association. The protonated ester MH(+) is normally observed as M(2)H(+) and as higher aggregates (M(3)H(+), M(3)H(+)(H(2)O)) also at high source temperature. The behavior of M(2)H(+) upon collisional activation is consistent with the reported dissociation of proton-bound dimers to MH(+) species that, in turn, fragment according to the known paths of lowest energy. In addition, other important product ions form within the plasma, some in very high relative abundance, which are attributed to ion-molecule condensation reactions between neutral M and either MH(+) or M(2)H(+) resulting in the elimination of CO, R'OH, alkene from the alkoxy moiety of the ester and HCOOH. A general scheme is proposed to account for the experimental observations, which suggest that the encounter complex formed between MH(+) and M or between M(2)H(+) and M may either collisionally relax to the protonated dimer or trimer, respectively, or react via covalent bond forming and cleaving steps to eliminate stable neutral molecules. The proposed scheme is supported by both the observed concentration dependence and the temperature dependence of the products relative abundances within the plasma. Such reactions can be the dominant process, as in the case of formate esters. A second significant ionization route involves addition of NO(+) to form M(n)NO(+) (n = 1, 2, 3). An additional product corresponding to [M(2)NO(+) - CO(2)] is also observed with iso- and n-butyl formate esters.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

On the High Viscosity of Aqueous Solution of Lysozyme Induced by Some Organic Solvents

A remarkably high viscosity has been induced in protein aqueous solutions by the addition of certain structurally related organic solvents. The effect has been observed for lysozyme aqueous solutions containing tetramethylurea (TMU), dimethylsulfoxide (DMSO), dimethylformamide, and hexamethylphosphortriamide. The effect has also been induced in ferrocytochrome c aqueous solutions by TMU. Critical concentrations for both the protein and organic solvent were verified for the onset of the viscosity increase. A common feature of the solvents which were able to induce the effect is a dipolar moiety (C=O, S → O and P → O) and a nonpolar region represented by the methyl groups. The resulting fluids show an extremely restricted flow and a typical non-Newtonian, pseudoplastic behavior. Use was made of¹H nuclear magnetic resonance (NMR) and Raman spectroscopy to characterize protein structural modifications and of¹³C NMR to investigate changes in relaxation times and chemical shifts in the solvent/water solutions. A systematic rheological characterization of the systems was undertaken for some of the solvents, and unusual patterns of viscous effects were identified for the solvent/water systems both with and without protein. The process was found to be at least partially reversible, as concluded from the recovered original solution rheological characteristics and the original protein¹H NMR spectrum, after eliminating the organic solvent by ultrafiltration. The whole process was characterized as consisting of two mutually independent stages. The first involves an extensive conformational transition of the polypeptide backbone, from a predominantly α-helical to increased random coiled and β-sheet structures, with the occurrence of nonorthodox protein secondary structures at regions above the solvent critical point. The second stage consists of short-lived interchain contacts leading to an entanglement of the macromolecular system as a whole. A microphase reversion in the organic solvent/water mixture, supported by¹³C NMR and rheological results, is proposed as the driving force causing the observed behavior.     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

Thermochemical studies of phthalimide and two N-alkylsubstituted phthalimides (ALKYL=ETHYL AND n-PROPYL)

The standard (p⁰=0.1 MPa) molar enthalpies of formation, Δ_fH_m⁰, for crystalline phthalimides: phthalimide, N-ethylphthalimide and N-propylphthalimide were derived from the standard molar enthalpies of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as, respectively, – (318.0±1.7), – (350.1±2.7) and – (377.3±2.2) kJ mol^–1. The standard molar enthalpies of sublimation, Δ_cr^gH_m⁰, at T=298.15 K were derived by the Clausius-Clapeyron equation, from the temperature dependence of the vapour pressures for phthalimide, as (106.9±1.2) kJ mol^–1 and from high temperature Calvet microcalorimetry for phthalimide, N-ethylphthalimide and N-propylphthalimide as, respectively, (106.3±1.3), (91.0±1.2) and (98.2±1.4) kJ mol^–1. The derived standard molar enthalpies of formation, in the gaseous state, are analysed in terms of enthalpic increments and interpreted in terms of molecular structure.