Preparation and properties of homogeneous V2O5-SiO2 xerogel composite based on interpenetrating polymer network

In this paper, we report the conducting and electrochemical properties of a homogeneous V₂O₅-SiO₂ xerogel composite obtained from the simultaneous polymerization in both inorganic components (Si-O and V-O based polymers) forming an interpenetrating polymer network, where a mutual “solubility” due to cross-links and entanglements was observed. The presence of V₂O₅ inside the silica matrix has a strong effect on electrical conductivity; measurements showed room temperature conductivity almost 1000 times higher than what is found in the literature. In addition, the electrochemical behavior is quite similar to that found in V₂O₅ xerogel. Moreover, the effects of thermal treatment on the conducting and electrochemical properties were investigated. It was found that both properties were improved with no significant effect on V₂O₅ xerogel layered structure.     

Production and characterization of refractive index gratings in high-birefringence fibre optics

In this work, we report production and modelling of both Bragg gratings and rocking filters in high birefringence fibre optics. Bragg gratings are produced by UV (257.0 nm) external interferometric exposition of a frequency-doubled Ar⁺ ion laser, whereas for rocking filters formation the visible Ar⁺ ion laser lines in 488.0 and 514.5 nm are used in an internal method. The spectral characteristics due to the birefringence properties are studied through numerical methods and experimental techniques. The spectral responsivity of the structures under temperature changes and stress application is presented.     

The first bismuth(III)-catalyzed guanylation of thioureas

This work describes the first catalytic bismuth-promoted synthesis of polysubstituted guanidines in good yields through the guanylation reaction of N-benzoyl or N-phenylthioureas with primary and secondary amines, but now employing equimolar amounts of each organic reagent. Both bismuth iodine and bismuth nitrate were efficient as inorganic thiophiles at only 5 mol % in relation to substrates, being the first example of inorganic thiophiles acting in guanylation at catalytic levels.     

声表面波对GaAs(110)量子阱发光特性的调制

结合声表面波和光致发光谱在低温(15K)下对非故意掺杂的GaAs(110)量子阱结构的发光特性进行了研究.实验结果表明，由于声表面波的作用GaAs(110)量子阱的发光强度减弱,并且其对应的重空穴能级出现了分裂的现象，当施加的声波强度P_rf达到20dBm时，能级分裂ΔE达到了10meV.进一步讨论了声表面波对GaAs(110)量子阱圆偏振光自旋注入的影响. 关键词： 发光 GaAs量子阱 声表面波 自旋极化     

2-Propanol oxidation on platinum and platinum–rhodium electrodeposits

The electrocatalytic oxidation of 2-propanol was investigated using on line differential electrochemical mass spectrometry (DEMS) on electrodeposited Pt and an arrange of bimetallics: Pt_0.84Rh_0.16, Pt_0.70Rh_0.30, Pt_0.55Rh_0.45. It has been observed that the Pt_0.84Rh_0.16 bimetallic electrode presented the best catalytic activity for 2-propanol electrochemical oxidation. Since 2-propanol is a secondary alcohol, only acetone and CO₂ are produced. The total yield of CO₂ and acetone has been determined from the DEMS measurements. It is found that acetone is the major product, as reported before for other electrodes. The acetone and CO₂ yield depends on the electrode composition. High amount of rhodium in the electrode composition strongly diminish the reaction rate as indicated by the decrease of both the acetone and CO₂ yield. However, acetone inhibition is much more intense. The only bimetallic electrode that presents considerable mass spectroscopy signals intensity for CO₂ and acetone is the Pt_0.84Rh_0.16 electrode. This electrode shows a slight increase in CO₂ selectivity, compared to the other electrodes studied in this work. Only very low coverages of stable adsorbates were present during the reaction. Two and one carbon adsorbate were observed for all the electrodes. Three carbon adsorbates were detected only for the Pt_0.84Rh_0.16 electrode. Therefore, acetone production does not require a stable adsorbate.     

Thermal behavior of the maleic anhydride modified poly(3-hydroxybutyrate)

Poly(3-hydroxybutyrate), PHB has been structurally modified through reaction with maleic anhydride, MA. Transesterification reaction was carried out fixing the PHB and MA and besides time and temperature the concentration of the triethylamine (used as catalyst) was changed. Glass transition, melting and crystallization temperature obtained from DSC curves and thermal degradation temperatures obtained from TG traces were used to evaluate the influence of the reaction conditions on the modification of PHB according to factorial design. On the base of the results the optimum conditions are to perform the PHB modification reaction with MA reaction at 110°C for 1 h with 5% v/v triethylamine.     

Polynomial Stability to Three-Dimensional Magnetoelastic Waves

In this work we show that the energy associated to the linear three-dimensional magneto-elastic system decays polynomially to zero as time goes to infinity, provided the initial data is smooth enough.     

Reaction of SbPO4 with lithium in non-aqueous electrochemical cells: preliminary study and evaluation of its electrochemical performance in anodes for lithium ion batteries

SbPO₄, a phosphate with a layered structure, was tested as an electrode material for lithium cells spanning the 3.0-0.0 V range. Two main electrochemical processes were detected as extensive plateaus at ca. 1.6 and 0.7 V in galvanostatic measurements. The first process was found to be irreversible, thus excluding a potential intercalation-like mechanism for the reaction and being better interpreted as a decomposition reaction leading to the formation of elemental Sb. This precludes the use of this compound as a cathodic material for lithium cells. By contrast, the process at 0.7 V is reversible and can be ascribed to the formation of lithium-antimony alloys. The best electrochemical response was obtained by cycling the cell at a C/20 discharge rate over the voltage range 1.25-0.25 V. Under these conditions, the cell delivers an average capacity of 165 Ah/kg—a value greater than those reported for other phosphates—upon successive cycling.