Adsorption of anionic dyes on chitosan beads. 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics

In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed.     

Novel Thiazole-Containing Complexing Agents and Luminescence of Their Europum(III) and Terbium(III) Chelates

The synthesis of novel thiazole-containing complexing agents and their luminescence properties with Eu^III and Tb^III ions are reported. One of these terpyridine analogues was also tested as an Eu^III labelling reagent, and its luminescence properties as an antibody conjugate were studied.     

Sulphate preconcentration by anion exchange resin in flow injection and its turbidimetric determination in water

A preconcentration procedure was established for sulphate determination in rain waters at the mg/l level, employing a small column packed with the AG1-X8 (200-400 mesh) anionic resin inserted into a flow injection system. Sulphate determination was performed by using the turbidimetric method based on reaction with barium. For concentrations within 0.10 and 2.0 MgSO(2-)(4)/l, a throughput of 50 determinations/hr was achieved, and the relative standard deviation of results was better than 2%.     

Multivariate optimization of an axially-viewed inductively coupled plasma multichannel-based emission spectrometer for the analysis of environmental samples

An experimental design procedure was applied to optimize the operating conditions of an axially-viewed inductively coupled plasma emission spectrometer instruments equipped with echelle optics with cross dispersion and charge transfer device. The multivariate effect of carrier gas flow rate and r.f. power on several analytical figures was investigated and discussed. Both ultrasonic and pneumatic nebulization were used. For the final choice of the optimum, different criteria were taken into account, mainly plasma robustness, instrumental precision, analyte and background net emission, detection limits and signal-to-background ratios. It was found that the use of moderate power (1100W) and mean carrier gas flow rate (0.75 L/min) allows to obtain sufficient plasma robustness, satisfactory precision, and excellent signal-to-background ratios and limits of detection, favorable for ultratrace element determinations in environmental matrices.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Immobilization of endo-1,4-β-xylanase on polysulfone acrylate membranes: Synthesis and characterization

We report on a new enzyme/support system to immobilize proteins such as enzymes through a covalent bond on polysulfone membranes. In the present case the enzyme endo-1,4-β-xylanase (E.C.3.2.1.8) is attached to polysulfone previously derivatized by introducing an acrylate group. Membranes are properly prepared from this polysulfone acrylate. Afterwards the enzyme is immobilized though the amino groups of side chains of the amino acids of the enzyme and the acrylate group of the derivatized polysulfone. Such immobilization of the enzyme is confirmed by microelemental analysis as well as by amino acid analysis by HPLC. Moreover, the enzymatic activity of the membranes was evaluated and compared with that corresponding to the free enzyme. Certain physical parameters (asymmetry, irregularity, pore size and surface roughness) of the corresponding enzymatic membranes were obtained from SEM and AFM image interpretation.     

Protective effects of cyanidin-3-O-beta-glucopyranoside against UVA-induced oxidative stress in human keratinocytes

Ultraviolet-A (UVA) radiation causes significant oxidative stress because it leads to the generation of reactive oxygen species (ROS), leading to extensive cellular damage and eventual cell death either by apoptosis or necrosis. We evaluated the protective effects of cyanidin-3-O-beta-glucopyranoside (C-3-G) against UVA-induced apoptosis and DNA fragmentation in a human keratinocyte cell line (HaCaT). Treatment of HaCaT cells with C-3-G before UVA irradiation inhibited the formation of apoptotic cells (61%) and DNA fragmentation (54%). We also investigated antioxidant properties of C-3-G in HaCaT cells against ROS formation at apoptotic doses of UVA; C-3-G inhibited hydrogen peroxide (H2O2) release (an indicator of cellular ROS formation) after UVA irradiation. Further confirmation of the potential of C-3-G to counteract UVA-induced ROS formation comes from our demonstration of its ability to enhance the resistance of HaCaT cells to the apoptotic effects of both H2O2 and the superoxide anion (O2*-), two ROS involved in UVA-oxidative stress. Furthermore, in terms of Trolox Equivalent Antioxidant Activity, C-3-G treatment led to a greater increase in antioxidant activity in the membrane-enriched fraction than in the cytosol (55% vs 19%). The protective effects against UVA-induced ROS formation can be attributed to the higher membrane levels of C-3-G incorporation. These encouraging in vitro results support further research into C-3-G (and other anthocyanins) as novel agents for skin photoprotection.     

Thermal and mechanical properties of PE/organoclay nanocomposites

Polyethylene/montmorillonite clay nanocomposites were obtained via direct melt intercalation. The clay was organically modified with four different types of quaternary ammonium salts. The objective of this work is to study the use of montmorillonite clay in the production of nanocomposites by means on rheological, mechanical and crystallization properties of nanocomposites and to compare to the properties of the matrix and PE/unmodified clay nanocomposites. In general, the tensile test showed that the yield strength and modulus of the nanocomposites are close to the pure PE. Apparently, the mixture with Dodigen salt seems to be more stable than the pure PE and PE/unmodified clay.     

Synthesis of fused purinoquinazolines. Three new heterocyclic ring systems

The Ullmann reaction of 8-aminotheophylline or 8-aminocaffeine with 2-chlorobenzoic acid and of 8-bromotheophylline with ethyl-2-aminobenzoate afforded derivatives of three new heterocyclic systems: purino[7,8-α]quinazoline-5,9,11(6H,8H,10H)-trione, purino[8,9-b]quinazoline-2,4,11(1H,3H,5H)-trione and purino[8,7-b]quinazoline-2,4,6(1H,3H,11H)-trione, respectively.     

V2O5/TiO2 oxidation catalysts, IV. Adsorption of acrolein on sodium-containing systems

Adsorption of acrolein on vanadia/titania catalysts fits a polymerization kinetics if Na–V compounds are not present or the vanadium content is lower than that corresponding to formation of a monolayer of vanadia on the titania support.

---

, Na–V .